Bedienungsanleitung Easymaxx Z05811 (Seite 4 von 8) (Deutsch, Englisch, Holländisch, Französisch)

703742

Zoom out

Zoom in

Vorherige Seite

1/8

Nächste Seite

EN Instructions

Customer Service / Importer:

DS Produkte GmbH, Am Heisterbusch 1, 19258 Gallin, Germany •

✆ +49 38851 314650 *)

*) Calls to German landlines are subject to charges. The cost varies depending on the service provider.

■ Do not use corrosive or abrasive cleaning products to clean the

product. They could damage the surface. When needed, wipe

the product off with a soft, dry cloth.

Product contents

• 1 x daylight lamp with built-in control panel

• 1 x adapter

• 1x remote control including 3 V type CR2032 button cell

(inserted)

Remote control

1 AN/AUS switch (ON/OFF)

2 Warm white light

3 Tageslicht (daylight)

4 Farbe (colour)

5 Farbwechsel (colour

change), all colours

6 Control panel for colour

selection (12 mixed col-

ours)

7 RGB setting (red, green,

blue)

8 Increase/decrease the

brightness

Start-up

ATTENTION!

■ The plastic foils and bags pose a suffocation hazard! Keep

children and animals away from the packaging material.

• Unpack the product contents and make sure that they are

complete (see chapter “Product contents”) and check for any

damages from transport. If the product, plug or mains cord

exhibits damages, do not use the product (!); instead contact

customer service.

• Before you use the product, remove all packaging material and

any labels located on the product and which serve to provide

protection during transport or are for advertising purposes.

Changing the remote control battery

The battery for the remote control has already been inserted.

You only have to remove the transport guard.

1. The battery compartment is lo-

cated on the narrow side of the

remote control. Pull it out as

shown.

2. Remove the empty battery

and insert a 3 V battery (type

CR2032). The positive terminal

must point upwards.

3. Place the battery compartment back in the remote control so

that it locks in place.

Use

Please note that the colour settings are mixed colours. For

this reason, the colour tints may exhibit minor deviations.

1. Connect the adapter to the port in the base of the lamp.

2. Insert the mains plug in a properly installed socket that is easily

accessible.

3. Turn on the lamp by pushing the button AN (on) on the remote

control or ☼ An/Aus (On/Off) on the control panel of the lamp.

4. Select the desired colour. To do so, push the colour button (4)

ﬁ rst and then the corresponding colour button on the remote

control.

5. You can also select the desired effect and push the

corresponding button (2, 3, 5) on the remote control or push the

button M (mode) on the control panel of the lamp several times.

6. Set the desired colour brightness using the buttons to

increase / decrease the brightness on the remote control or

using the arrow buttons (˄ increase, ˅ decrease) on the control

panel.

7. Push the button AUS (off) on the remote control or push ☼ An/

Aus (On/Off) on the control panel again to turn off the lamp.

Troubleshooting

If the product is not working properly, please check whether you

are able to rectify the problem yourself.

Do not attempt to repair a defective electrical product

yourself!

If the light does not switch on, check

• whether the product is properly connected with the socket.

• whether the socket is defective. Try another socket.

• the fuse for your mains connection.

• whether the battery in the remote control is empty.

Variations

Article number Model number

wood look oak Z 05797 SL7375O

wood look brown Z 05811 SL7375M

wood look beech Z 05818 SL7375B

brass look Z 05825 SL7375C

chrome look Z 05837 SL7375N

white Z 07375 SL8025T

Technical data

Colour temperature:

warm white: approx. 3000 K

daylight: approx. 5500 K

Voltage supply:

adapter input: 100 – 240 V, 50/60 Hz

output: DC 12 V, 1 A

lamp: DC 12 V

remote control: 3 V (1 x 3 V battery, type CR2032)

Output: 5 W

Disposal

The packaging material is recyclable. Dispose of the

packaging in an environmentally-friendly manner and make

it available to the collection service for recyclable materials.

Dispose of the product in an environmentally-friendly

manner. It does not belong in the household garbage.

Dispose of it at a recycling centre for old electric and

electronic equipment. For more information, please contact

the administration in your community.

Batteries and rechargeable batteries must be removed and

disposed of separately before disposing of the product.

To protect the environment, batteries and rechargeable

batteries may not be disposed of together with normal

household waste. Instead they must be turned in at

appropriate collection points. Please also observe applicable

statutory provisions regulating the disposal of batteries.

push

pull

DLTL_V2_06_2016

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Easymaxx Z05811 Seite 4

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info