100967

Easypix Aqua W311 Seite 2

2
Zoom out
Zoom in
Vorherige Seite
1/2
Nächste Seite
5.3 Formatting the memory card
1. Press MODE button
2. Select system setting by 4 way keys
3. Press OK to confirm.
4. Select format storage press OK to confirm.
5. Press OK to format the card.
5.4 Setting the resolution
The camera can be set to three different resolutions.
1. Press MENU to set proper resolution.
Resolution: 2M (1600 x 1200), 3.1M (2048X1536), 5M (2560 x 1920)
2. Three different resolutions will be displayed. Select the desired resolution by using the
or buttons and then press the MENU button to confirm the selection.
5.5 Taking photographs
1. Turn the camera on by pressing the ON/OFF button.
2. Set the camera to photo mode ( ).
3. Depending on the distance to the object being photographed, use Macro switch to
adjust the distance. Select the flower symbol ( ) if you wish to take a close-up
photograph (11cm – 18cm.).
If you wish to take photograph of surroundings or people (0.5m - infinity), set the macro
switch to normal mode ( ).
4. If you are not sure if there is enough lighting, turn the automatic flash ( ) on by pressing
the flash button. (If the battery power is low, the flash won’t be activated).
5. Use the LCD screen to aim the object you wish to photograph.
6. Press Shutter button and hold the camera steadily for 2 to 3 sec, until the LCD display
turn on again.
Note: If you take photographs with the default camera settings, it is possible that the quality of
the photographs will not always be optimal. Different surroundings produce different
results. Adjust the camera settings as required.
5.6 Zoom in and out
5.6.1 The camera can zoom in up to 4 times in preview mode.
1. Zoom in by pressing the
▲
button, a bar will appear on the left -hand side of the display.
4.0 is maximum zoom.
2. You can zoom out by pressing the down arrow button.
3. Press the shutter button once you have found the desired setting.
5.6.2 The picture can zoom in and move in playback mode
1. Zoom in by pressing the
▲
button.
2. Press OK button, the picture can be moved 4 ways by pressing the 4way buttons.
3. Press OK button to return to zoom in mode.
5.7 Taking photographs using self-timer function
You can use the self-timer function when you wish to take a photograph of yourself or when you
wish to photograph an object where the camera must be as still as possible, for example on the
stand.
1. Set the camera to photo mode( ) .
2. Press the MENU button. The quick menu will appear.
3. Press
▼
to self-timer mode, press or to set the delay time: 10/15/20 seconds or
off.
4. Press the MENU button to confirm. The self-timer function is now ready for use.
5. Aim the object you wish to photograph.
6. Press the SHUTTER button to take a photograph.
7. The self-timer indicator LED in the front will blink.
8. The photograph will be taken after the time delay you set, and the camera will beep
once.
5.8 Recording video clips
1. Press the MODE button and press or to select video mode ( ), Press OK to
confirm.
2. Press the SHUTTER button to start recording video, press the SHUTTER button again to
stop recording. The video clip will now be saved as an AVI file in the camera memory.
3. Press MENU to set proper resolution, EV and WB, and press MENU again to confirm.
5.9 Viewing photographs
Once you have taken some photographs or recorded video clips, you can view them on the
LCD screen. Follow the instructions given below to do this.
1. Press PLAYBACK button, press or to select the video clip or photo.
2. Press OK, it will show video clips and photos thumbnails on the LCD.
3. Press ▲,▼, or to navigate, then press OK, the selected photo will be shown on the
LCD
4. Press MENU to select SLIDE SHOW, and then press OK to confirm. The pictures saved
in your camera or your SD card will show automatically.
5.10 Playback video clips
1. When video clips are played, press
▲
to play,
▼
again to fast forward, and press
▼
to
rewind.
2. Press or to adjust the volume
3. Select icon
to pause the playback
4. Press PLAYBACK key to exit.
5.11 Recording voice
1. Press MODE button,
2. Press or to select the voice recording mode, then press OK to confirm.
2. Press SHUTTER to start voice recording and press again to stop.
5.12 Playback voice files
1. Press MODE button, and press or to select the Voice Playback mode,
2. Press OK to confirm.
3. Press OK to playback the selected voice file.
4. Press or to adjust the volume
.
Caution:
This camera has no built-in speaker, you can playback the voice Via TV.
5.13 Delete photographs and video clips
You can choose to delete a single photograph / video clip, or delete all the photographs / video
clips from the memory.
5.13.1 Delete photograph
Follow the instructions given below to delete photograph.
1. Press PLAYBACK to entry playback mode.
2. Press the MENU button and select delete one/Delete all, press OK to confirm.
3. If you select Protect picture, your current file or images can not be deleted.
4. Press MODE to exit.
NOTE: Select ‘Deleting All’ Press OK to confirm all the files will be deleted.
5.13.2 Shortcut to delete one picture
1. Press PLAYBACK to entry playback mode.
2. Select the photo (video) you want to delete, press DELETE button.
3. Press OK to confirm or Menu to exit.
6. Installing the camera driver
The driver in the CD has to be installed:
1. For windows 98 SE: Download picture /video, and as a PC cam.
2. For windows ME, Windows 2000 and Windows XP: For using as a PC cam only.
(Download picture /video is driver free)
6.1 Uninstalling old drivers and devices
The most common problem occurring during installation is the presence of a driver for a similar,
old device. The best solution is remove all the drivers related to the old devices before installing
the new driver. Make sure you only delete programs for old, unused (similar) devices.
1. Enter Windows ‘Safe Mode’ (press F8 when starting Windows and then select ‘Safe
Mode’ from the menu which will be displayed).
2. Click on ‘Start – Settings – Control Panel’ and double-click on ‘Add/Remove Programs’
icon.
3. Find all the programs for similar, old devices and remove these by clicking on the
‘Add/Remove’ button. When in ‘Safe Mode’, it is possible for some programs to appear
twice. In that case, remove all the programs which appear twice.
4. Restart the computer.
6.2 Installing the driver for Windows 98 / Windows ME /
Windows 2000 / Windows XP
Note: Make sure all other programs are closed during the installation process.
Note: During installation for Windows XP, you may receive a message saying that the driver
has not been signed. This does not cause a problem for the functionality of the program.
Please click "Yes" to continue.
Note: For example, ‘D:\’ is used to indicate the CD-ROM drive. This may be different for your
computer.
1. Insert the CD-ROM into your computer’s CD-ROM drive. The installation program will
start automatically. If it does not start automatically, please do the following:
a) Select 'Run' from Windows Start menu.
b) Type [D:\SETUP.EXE] and click on 'OK' to start the Software Installer.
2. The Software Installer will appear.
3. Select the language you wish to use for the installation.
4. Click on ‘Install driver‘ to start the installation of the camera driver.
5. Follow the on-screen instructions.
6.3 Connecting the camera
The camera can be connected to the computer in two different modes: mass storage device
and as a PC camera for video conferencing on the Internet.
6.3.1 Connecting as a mass storage device
This option makes it possible to download photographs and video clips onto your computer.
1. Turn the camera on by pressing the ON/OFF button.
2. Press MODE button and select the system setting.
3. Press
▼
button to set USB connection.
4. Press or button to choose the mass storage mode.
5. Connect the camera to the computer.
6. Windows will automatically detect the camera. You can use this camera as a removable
disk.
6.3.2 Connecting as a PC camera
When you connect the camera as a PC camera, you can use the camera as a web cam for
video conferencing on the Internet by using Windows NetMeeting or Windows Messenger.
(You must install the driver before connecting the Digital Camera to your computer. )
1. Turn the camera on by pressing the ON/OFF button.
2. Press MODE button and select the system setting.
3. Press
▼
button to chook USB connection.
4. Press or button to choose the PC camera mode.
5. Connect the camera to the computer.
6. Windows will automatically detect the camera. You can use this camera as a web
camera.
7. Trouble shooting
Problem
Cause
Sol
ution
Cannot turn on the camera
by pressing the “power”
button.
Low battery power, battery
is missing or incorrectly
inserted the battery.
Install or replace the battery
correctly.
Photos are not saved or are
missing when taking
pictures.
The memory card or built-in
memory hasn’t been
formatted properly in the
camera.
Format the memory in SET mode
of the camera. Please refer to
section 5.3.
Cannot find removable disk
after connecting the camera
to the computer via U
SB.
1. Connection failure.
2. The mode of the camera
is not set to removable
disk properly
1. Make sure all cable
connections are secured and
restart the computer.
2. Set the camera to removable,
refer to section 3 (system setting,
USB connection).
Flash does not work. Battery Power is very low. Replace with fresh alkaline
batteries.
The batteries used up easily
Use wrong type battery. Replace with fresh alkaline
battery.
The photos are over
exposure
Set the flash light to force
mode in bright
environment.
Set the Flash light to Auto
mode .
The photos are blurry
1. The camera is not held
steadily
2. The lens of camera is
dirty
1. Hold the camera steadily until it
beeps when takes photo.
2. Clean the lens with soft dry
cloth.
Get a warning message:
“Capture device was not
detected” when trying to
open PC cam.
1. Conflict with another
camera or capture
device.
2. The mode of the camera
is not set to PC cam
mode properly.
1. Remove any other camera
driver completely from your
system. Sometimes you have to
re-install your system.
2. Set the camera to PC cam
mode, refer to section 3 (system
setting, USB connection).
Cannot preview image in
PC Camera mode.
“Preview” is not selected in
option Menu in PC.
Click “preview” in the “option”
menu to select it.
For EU only
AM-D331T-UGB-STD-R
2

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Forenregeln

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Art des Missbrauchs:

Zum Beispiel antisemitische Inhalte, rassistische Inhalte oder Material, das zu einer Gewalttat führen könnte.

Beispielsweise eine Kreditkartennummer, persönliche Identifikationsnummer oder unveröffentlichte Privatadresse. Beachten Sie, dass E-Mail-Adressen und der vollständige Name nicht als private Informationen angesehen werden.

Forenregeln

Um zu sinnvolle Fragen zu kommen halten Sie sich bitte an folgende Spielregeln:

Neu registrieren

Registrieren auf E - Mails für Easypix Aqua W311 wenn:


Sie erhalten eine E-Mail, um sich für eine oder beide Optionen anzumelden.


Andere Handbücher von Easypix Aqua W311

Easypix Aqua W311 Bedienungsanleitung - Deutsch - 2 seiten


Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Wenn Sie innerhalb von 15 Minuten keine E-Mail mit dem Handbuch erhalten haben, kann es sein, dass Sie eine falsche E-Mail-Adresse eingegeben haben oder dass Ihr ISP eine maximale Größe eingestellt hat, um E-Mails zu erhalten, die kleiner als die Größe des Handbuchs sind.

Ihre Frage wurde zu diesem Forum hinzugefügt

Möchten Sie eine E-Mail erhalten, wenn neue Antworten und Fragen veröffentlicht werden? Geben Sie bitte Ihre Email-Adresse ein.



Info