5. Insert and take out SD card ( prerequisite )
• Insert SD card before scanning.
•The scanner has no built-in memory, SD card is required.
• Please close and then open the cover after card inserted.
Note: This device does not support hot-plug. Inserting SD card during operation will cause
the device power off.
6. Quick Start
Connect to the AC power source to turn on the device.
Open the upper cover and you can see the power LED light will become red.
Insert the SD card into the SD card slot.
Insert the slide or film tray into the scanner and move the tray carefully to adjust the film.
Press the Start button to capture a picture
Power On/Off:
• Power On: Open the upper cover and you can see the power LED light will become red.
• Power Off: Close the upper cover.
Select Function
• Press the Function button to enter function mode.
You can see the icon on the screen.
Press the Left or Right buttons to select function.
