Bedienungsanleitung Easypix EasyScan Bluetooth (Seite 2 von 2) (Englisch)

479777

Zoom out

Zoom in

Vorherige Seite

1/2

Nächste Seite

side of the scanner.

4. Hold the scanner flat against the material and then press the button

once.

5. Slide the scanner slowly, keeping your hand stable to get the best quality picture.

6. Press the button again to stop scanning.

5.8 Bluetooth®

Turn on Bluetooth technology and pair with other compatible device (sold separately).

1. Slide the [POWER] switch to [BT] to enable Bluetooth wireless technology. “BLUE”

LED light will turn on.

2. Enable Bluetooth technology on receiver.

3. Search and pair receiver with “Handy Scanner.”

4. Input “0000” as the passcode once the receiver detects the scanner. “BLUE” LED

light will flash.

5. Press to pair connection between receiver and scanner. “BLUE” LED

light will stop flashing and remain “BLUE” once connection is successfully set up.

Note: button must be pressed within one minute or the connection will fail.

5.9 Transferring files via Bluetooth technology

1. After the connection is set up successfully, press the [DPI] or the [C/BW] button to

choose the scan file that will be transferred to the receiver. The scan file number will

display on the LCD screen.

2. After the scan file is selected, press once. The selected file will start

to transfer. During a file transfer, “BLUE” LED light will flash.

3. After the file is transferred, the receiver will indicate file transfer is complete and the

flashing “BLUE” LED light on the scanner will stop blinking. Files in scanner will be

kept unchanged.

Note: The process for receiving files from scanner may differ from each device. Please refer to

your Bluetooth device’s manual for more information.

6. Viewing your scans

1. Connect your scanner to your computer and then turn on your scanner.

2. Your computer should recognize the scanner as a “Removable Disk.” Click “Open

folder to view files” to view and import scans.

NOTE: If the Removable Device window did not launch automatically, go to your “My Computer”

(PC) and find the device under Removable Storage.

NOTE: In power off mode, connect your scanner to your computer to charge the battery. OR use

the power adapter that is included.

7. Specifications

Image sensor Color Contact Image Sensor

Number of sensor 5136 dots(1st~5104 dots available)

Resolution

Low resolution : 300x300 dpi(default)

High resolution: 600x600 dpi

Maximum scanning

speed for A4 size

document

Color High resolution: 8 Seconds

Mono High resolution: 6.0 Seconds

Color Low resolution: 3.0 Seconds

Mono Low resolution: 2.0 Seconds

Capacity (Based on 1GB microSD

card. Scan A4 size file, the quantity

of scans varies depending on the

content complexity)

600dpi color: 220 Photos(Min.)

600dpi mono: 290 Photos(Min.)

300dpi color: 780 Photos(Min.)

300dpi mono: 1280 Photos(Min.)

Scan width

Approx. 8.5”

Scan length 300DPI: 53"(Max), 600DPI: 26"(Max)

File format JPEG

LCD Scanning status display

Auto Power Off 3 Minutes

USB Port USB 2.0 high speed

External memory microSD/microSDHC card

Standard Battery 4.2V Rechargeable Lithium Polymer battery

8. Computer system minimum requirement

Operating System

Windows® XP, Windows® Vista™, Windows® 7 and

Mac OS® 10.4 or above

(direct plug-in, driver installation not required)

CPU Pentium III or above

RAM At least 256MB

Interface USB port

9. Troubleshooting

Problem Cause Solution

Cannot turn on the

scanner

1. Low battery.

2. Battery not inserted

properly

1. Recharge the battery by

connecting scanner to the

computer via USB cable.

2. Replace or install the

battery correctly

Pictures cannot be

saved when you are

scanning them

1. microSD card has not

been installed

correctly.

2. Memory is full

3. The microSD card has

not been formatted

properly

1. Install microSD card with

metal side facing upwards.

2. Download the pictures from

the scanner to the

computer to create storage

space

3. Format your microSD card.

Refer to section 5.4

Computer does not

recognize your scanner

when connected. (You

cannot find removable

disk)

Connection failure. 1. Make sure all cable

connections are secured.

Restart the computer if

necessary

2. Try a different USB port.

The battery life is

very short

Use wrong type of

battery

Replace with new

4.2V rechargeable battery

Blurry images 1. The lens of scanner is

dirty.

2. Contact Image Sensor

aged.

1. Clean the lens with soft

dry cloth

2. Recalibrate the scanner.

Refer to section 5.5

ERR. LED is on when

scanning a document

Scanning speed is too

fast

Press the

button to reset and try re-

scanning the document more

slowly

ERR. LED is on after

powering on the

scanner

The calibration data is

reset.

Recalibrate the scanner.

Refer to section 5.5

Black Image Contact Image Sensor

aged.

Recalibrate the scanner.

Refer to section 5.5

10. ABBYY® OCR Software

(Optional, not required to install to operate scanner)

Compatible with Windows® XP, Windows® Vista™, Windows® 7

To access the software User’s Manual go to the Help menu for instructions on how

to use the OCR software application:

1. Load and open the ABBYY software.

2. Press the “F1” key located on your keyboard to launch the “Help” menu from the

software.

3. OR, locate the ABBYY icon found next to the Time indicator on your computer’s

taskbar and then right click on the icon to access the “Help” menu.

For free optional stitching software, please download the

program from the following link:

http://research.microsoft.com/en-us/um/redmond/groups/ivm/ice/

Easypix EasyScan Bluetooth Seite 2

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Andere Handbücher von Easypix EasyScan Bluetooth

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info