Additional notes:
1. On the transmitter, activate the Learn Mode:
468931003260
INSTAT 868… Quick Start – Creating the radio link
Note: without correctly established radio link the receiver will work in Alarm mode, the room will be heated constantly to 30%.
For INSTAT 868-r/rd (with display)
Details see manual item 6.17
Note:
This transmitter cannot be used
in combination with receivers
0525 98… or 507 1901/2…
(with 433 MHz)
With button Y, move cursor to l
Press and hold down button b and additionally press
button Y briefly.
The display reads 0x:xx (x = any figure)
Change first digit to (1)x:xx
Press b
Symbol zcan be read bottom right (Learn-Mode is active now)
For INSTAT 868-r1 (without display)
Details see manual item 5
Note:
This transmitter cannot be used
in combination with receivers
0525 98… or 507 1901/2…
(with 433 MHz)
Press and hold down button ï (bottom) and additionally
press button RESET (top) briefly.
The red lamp will switch on (Learn Mode is active now)
Note for electric heating (the valve protection should be switched off
For INSTAT 868-r/rd (with display)
Details see manual item 6.8
With button Y, move cursor to k
Press and hold down button b and additionally press
button Y briefly.
The display reads xx:x(1) (x = any figure)
Change fourth digit to xx:x(0) (= valve protection off)
Press b
For INSTAT 868-r1 (without display)
Details see manual item 3.7
Open jumper BR1
4. Testing the radio link:
Adjust temperature to 30/40°, after ~30 sec the red lamp at the receiver will switch on
Adjust temperature to 5 °, after ~30 sec the red lamp at the receiver will switch off
For controllers without radio clock (INSTAT 868-r)
Clock and day of the week should also be adjusted, see manual item 2.5 (short description).
If necessary modify events and temperatures, see in manual table I, II and controller features table III.
For receivers INSTAT 868-a8U
If necessary: adjust clock see manual "Description of the Clock"
modify program see manual "Adjust events for the Rooms"
2. On receiver, activating the Learn Mode:
For INSTAT 868-a4 and -a6
Details see manual item 5
Note:
This receiver cannot be used
in combination with transmit-
ters 0525 98… or 517 1901…
(with 433 MHz)
For the channel to be learned, press the
related button.
E.g. for channel 1 press the button close to it briefly.
The red lamp will switch on and a tone can be heard
If the lamp at the receiver is switched off and the tone
stops, the radio link is established (after ~30 sec)
For INSTAT 868-a1 and -a1S
Details see manual items 5 or item 4 for the plug in receiver
Note:
This receiver cannot be used
in combination with transmitters
0525 98… or 517 1901… (with 433
MHz)
Press button z briefly.
The red lamp will switch on and a tone can be heard
If the lamp at the receiver is switched off and the tone
stops, the radio link is established (after ~30 sec)
3. Cancelling Learn Mode on the Transmitter:
For INSTAT 868-r/rd (with display)
Press b briefly (Learn Mode is deactivated now)
Move cursor to k via Y, for working with the
weekly program
For INSTAT 868-r1 (without display)
Press button RESET briefly (upper side) Learn Mode is
deactivated now)
╞
For INSTAT 868-a8U
Details see manual item 4.1
Note
This receiver cannot be used in combination with transmitters 0525 98... or 517 1901 … (with 433 MHz)
Press Y until “L” is visible. The already teached channels are visible on the lamps and in the display.
b
a , Z
until the lamp for the requested room is blinking.
b
to start learning mode. The display counts up.
If the transmitter is recognised, the corresponding lamp lights constantly and in the display
there will be a chevron on this room.
Additional notes:
1. On the transmitter, activate the Learn Mode:
468 931 003260
INSTAT 868… Quick Start – Creating the radio link
Note: without correctly established radio link the receiver will work in Alarm mode, the room will be heated constantly to 30%.
For INSTAT 868-r/rd (with display)
Details see manual item 6.17
Note:
This transmitter cannot be used
in combination with receivers
0525 98… or 507 1901/2…
(with 433 MHz)
With button Y, move cursor to l
Press and hold down button b and additionally press
button Y briefly.
The display reads 0x:xx (x = any figure)
Change first digit to (1)x:xx
Press b
Symbol zcan be read bottom right (Learn-Mode is active now)
For INSTAT 868-r1 (without display)
Details see manual item 5
Note:
This transmitter cannot be used
in combination with receivers
0525 98… or 507 1901/2…
(with 433 MHz)
Press and hold down button ï (bottom) and additionally
press button RESET (top) briefly.
The red lamp will switch on (Learn Mode is active now)
Note for electric heating (the valve protection should be switched off
For INSTAT 868-r/rd (with display)
Details see manual item 6.8
With button Y, move cursor to k
Press and hold down button b and additionally press
button Y briefly.
The display reads xx:x(1) (x = any figure)
Change fourth digit to xx:x(0) (= valve protection off)
Press b
For INSTAT 868-r1 (without display)
Details see manual item 3.7
Open jumper BR1
4. Testing the radio link:
Adjust temperature to 30/40°, after ~30 sec the red lamp at the receiver will switch on
Adjust temperature to 5 °, after ~30 sec the red lamp at the receiver will switch off
For controllers without radio clock (INSTAT 868-r)
Clock and day of the week should also be adjusted, see manual item 2.5 (short description).
If necessary modify events and temperatures, see in manual table I, II and controller features table III.
For receivers INSTAT 868-a8U
If necessary: adjust clock see manual "Description of the Clock"
modify program see manual "Adjust events for the Rooms"
2. On receiver, activating the Learn Mode:
For INSTAT 868-a4 and -a6
Details see manual item 5
Note:
This receiver cannot be used
in combination with transmit-
ters 0525 98… or 517 1901…
(with 433 MHz)
For the channel to be learned, press the
related button.
E.g. for channel 1 press the button close to it briefly.
The red lamp will switch on and a tone can be heard
If the lamp at the receiver is switched off and the tone
stops, the radio link is established (after ~30 sec)
For INSTAT 868-a1 and -a1S
Details see manual items 5 or item 4 for the plug in receiver
Note:
This receiver cannot be used
in combination with transmitters
0525 98… or 517 1901… (with 433
MHz)
Press button z briefly.
The red lamp will switch on and a tone can be heard
If the lamp at the receiver is switched off and the tone
stops, the radio link is established (after ~30 sec)
3. Cancelling Learn Mode on the Transmitter:
For INSTAT 868-r/rd (with display)
Press b briefly (Learn Mode is deactivated now)
Move cursor to k via Y, for working with the
weekly program
For INSTAT 868-r1 (without display)
Press button RESET briefly (upper side) Learn Mode is
deactivated now)
╞
For INSTAT 868-a8U
Details see manual item 4.1
Note
This receiver cannot be used in combination with transmitters 0525 98... or 517 1901 … (with 433 MHz)
Press Y until “L” is visible. The already teached channels are visible on the lamps and in the display.
b
a , Z
until the lamp for the requested room is blinking.
b
to start learning mode. The display counts up.
If the transmitter is recognised, the corresponding lamp lights constantly and in the display
there will be a chevron on this room.
