701129
2
Zoom out
Zoom in
Vorherige Seite
1/2
Nächste Seite
Eberspächer Climate Control Systems GmbH & Co. KG | Eberspächerstraße 24 | 73730 Esslingen
info@eberspaecher.com | www.eberspaecher.com
Setting heating mode preselection at the mini controller:
Press the
button to select heating mode – the preselection
is saved. You can set the setpoint temperature default with the
temperature preselection controller. To confirm, the red LED lights up
for approx. 3 sec, but the heater is not started.
Setting ventilation mode preselection at the mini controller:
Press the
button to select ventilation mode – the preselection is
saved. The temperature preselection controller has no function in
ventilation mode. To confirm, the blue LED lights up for approx. 3 sec,
but the heater is not started.
B) Heater is switched on (mini timer is active)
The ON / OFF button on the mini timer is used to switch the heater
on in the saved mode (heating / ventilation - as preselected using
the mini controller) mode). If the heater is in heating mode the red
LED lights up; in ventilation mode the blue LED lights up as a check
signal.
Using the mini controller to switch between heating and
ventilation modes:
Press the
button to switch to heating mode. You can set the
setpoint temperature default with the temperature preselection
controller. If the heater is in heating mode the red LED lights up as a
check signal.
The preselection of the mode is updated.
Press the
button to switch to ventilation mode. The temperature
preselection controller has no function in ventilation mode. If the
heater is in ventilation mode the blue LED lights up as a check signal.
The preselection of the mode is updated.
Heating mode is ended with an after-run.
Using the mini controller to change the setpoint temperature
default:
The temperature preselection controller can be used to set the
temperature default at any time during heating mode.
Emergency operation – error when preselecting the operating
mode:
Unable to save the mode preselection.
The red LED flashes for approx. 10 sec. The mini controller then
switches to emergency mode (operating mode preselection: heating).
The heater remains switched off. Emergency mode can be reset by
renewed preselection or by a voltage reset (remove the fuse).
If the heater is switched on by the mini timer in emergency mode, the
red LED lights up and flashes. The heater is in heating mode with set
setpoint temperature default.
It is not possible to change modes in emergency operation.
The heater can only be switched off via the mini timer.
Service
Technical Support
If you have any technical questions or problems with the heater, the
control unit or the operating software, please contact the following
service address:
support-UK@eberspaecher.com
22 1000 90 96 70 EN 12.2016 Subject to change without notice © Eberspächer Climate Control Systems GmbH & Co. KG
EN | Operating Instructions | Airtronic Mini-Controller
2

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Forenregeln

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Art des Missbrauchs:

Zum Beispiel antisemitische Inhalte, rassistische Inhalte oder Material, das zu einer Gewalttat führen könnte.

Beispielsweise eine Kreditkartennummer, persönliche Identifikationsnummer oder unveröffentlichte Privatadresse. Beachten Sie, dass E-Mail-Adressen und der vollständige Name nicht als private Informationen angesehen werden.

Forenregeln

Um zu sinnvolle Fragen zu kommen halten Sie sich bitte an folgende Spielregeln:

Neu registrieren

Registrieren auf E - Mails für Eberspacher Airtronic Mini-Controller wenn:


Sie erhalten eine E-Mail, um sich für eine oder beide Optionen anzumelden.


Andere Handbücher von Eberspacher Airtronic Mini-Controller

Eberspacher Airtronic Mini-Controller Bedienungsanleitung - Deutsch - 2 seiten

Eberspacher Airtronic Mini-Controller Bedienungsanleitung - Holländisch - 2 seiten


Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Wenn Sie innerhalb von 15 Minuten keine E-Mail mit dem Handbuch erhalten haben, kann es sein, dass Sie eine falsche E-Mail-Adresse eingegeben haben oder dass Ihr ISP eine maximale Größe eingestellt hat, um E-Mails zu erhalten, die kleiner als die Größe des Handbuchs sind.

Ihre Frage wurde zu diesem Forum hinzugefügt

Möchten Sie eine E-Mail erhalten, wenn neue Antworten und Fragen veröffentlicht werden? Geben Sie bitte Ihre Email-Adresse ein.



Info