701125
36
Zoom out
Zoom in
Vorherige Seite
1/116
Nächste Seite
EN
27 ºC or 59 ºF and 71 ºF by briefly pressing the
or button. The set temperature value and
CA are shown alternately in the display.
2.2.6 Function F6 – display °C or °F
F6 appears in the display, the display then
switches to °F.
To switch to ºC display, with the air-conditioning
system switched off, press the
button and
keep it pressed until
flashes on the display.
As soon as
is no longer flashing press the
button.
Note
During this process the remote control is disa-
bled and must be activated again.
3 Remote control
3
1
3
2
1 Switching on and off (ON / OFF)
2 Blower speed control.
3 Temperature control.
3.1 Starting up the remote control
With the air-conditioning system switched off,
press the
button of the control unit and keep
it pressed until
appears flashing on the dis-
play. As soon as
is no longer flashing, press
the ON / OFF button of the remote control within
30 sec. The required activation is confirmed
with an acoustic signal. If the time is exceeded
repeat the process.
3.2 Shutting down the remote control
Keep the button of the control unit pressed
until
flashes on the display. As soon as
is no longer flashing, press the
button within
30 sec. If the time is exceeded repeat the
process.
3.3 Manual operation
3.3.1 Setting the temperature and blower
speed with the remote control
Set a temperature value between 15 ºC and
27 ºC or 59 ºF and 71 ºF by briefly pressing the
or button. The set temperature value
appears in the display.
Set a blower speed V1, V2, V3, V4 or V5 by keep-
ing the
button pressed.
During the setting the blower level is shown in
the display.
3.4 Automatic operation
3.4.1 Setting the temperature with the
remote control
Set a temperature value between 15 ºC and
27 ºC or 59 ºF and 71 ºF by briefly pressing the
or button. The set temperature value and
CA are shown alternately in the display.
Operating Instructions | Cooltronic G2 / G2.5 Hatch
81.0000.95.2783 | EN | 10.201936
36

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Forenregeln

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Art des Missbrauchs:

Zum Beispiel antisemitische Inhalte, rassistische Inhalte oder Material, das zu einer Gewalttat führen könnte.

Beispielsweise eine Kreditkartennummer, persönliche Identifikationsnummer oder unveröffentlichte Privatadresse. Beachten Sie, dass E-Mail-Adressen und der vollständige Name nicht als private Informationen angesehen werden.

Forenregeln

Um zu sinnvolle Fragen zu kommen halten Sie sich bitte an folgende Spielregeln:

Neu registrieren

Registrieren auf E - Mails für Eberspacher Cooltronic 1400 G2 Hatch wenn:


Sie erhalten eine E-Mail, um sich für eine oder beide Optionen anzumelden.


Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Wenn Sie innerhalb von 15 Minuten keine E-Mail mit dem Handbuch erhalten haben, kann es sein, dass Sie eine falsche E-Mail-Adresse eingegeben haben oder dass Ihr ISP eine maximale Größe eingestellt hat, um E-Mails zu erhalten, die kleiner als die Größe des Handbuchs sind.

Ihre Frage wurde zu diesem Forum hinzugefügt

Möchten Sie eine E-Mail erhalten, wenn neue Antworten und Fragen veröffentlicht werden? Geben Sie bitte Ihre Email-Adresse ein.



Info