Zoom out
Zoom in
Vorherige Seite
1/2
Nächste Seite
Model Nos: 101 and 102
Please note that this accessory is only compatible with Econo-Heat eHeater+
model no. 0607 only. 2 year warranty www.econo-heat.com
digitally integrated tHerMOStat & tiMer
THE ORIGINAL LOW COST ENERGY-SAVER HEATER
F1
F2
F3
F4
F5
SET °C or °F
SET CLOCK
A B C D E
G
ECONO-HEAT™ Energy Efficient Appliances (Pty) Limited
Address: 7 Mercury Crescent, Wetton, Cape Town, South Africa 7780
Phone: +27 21 762 6500 Fax: +27 21 762 6500
Email: info@econo-heat.com Web: www.econo-heat.com
room heater
accessory
Prior to operating the ECONO-HEAT
eController, please familiarise yourself with the
following safety instructions:
READ AND SAVE THESE
IMPORTANT SAFETY
INSTRUCTIONS
 

 OFF

 OFF

 
 

 


 

 



 

 



IMPORTANT







TWO YEAR WARRANTY



 




 








 



LIMITATION OF LIABILITY
1 











2 












INTRODUCTION










ROOM SIZES


 

 

QUICK INSTALLATION STEPS

1 OFF 



2 
non-operational

3 


4 


START-UP INSTRUCTIONS
1 
 
   
2  
SETTING THE CLOCK
1  
2 
   

3 

MODE SELECTION
 
   

 
  


MANUAL PROGRAMMING




1

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Forenregeln

Inhalt der Seiten


  • Page 1

    digitally integrated THERMOSTAT & TIMER

    Model Nos: 101 and 102
    Please note that this accessory is only compatible with Econo-Heat eHeater+
    model no. 0607 only. 2 year warranty www.econo-heat.com

    Econo-Heat™ Energy Efficient Appliances (Pty) Limited
    Address: 7 Mercury Crescent, Wetton, Cape Town, South Africa 7780
    Phone: +27 21 762 6500 Fax: +27 21 762 6500
    Email: info@econo-heat.com Web: www.econo-heat.com

    room heater
    accessory

    SET °C or °F
    F1
    F2

    G

    F3

    F4
    F5

    A

    B

    C

    D

    E

    SET CLOCK

    Prior to operating the ECONO-HEAT™
    eController, please familiarise yourself with the
    following safety instructions:

    read and save these
    important safety
    instructions

    • Read all the instructions and only use the eController for its intended
    purpose.
    • The heater must be switched OFF before plugging or unplugging it from
    the wall socket. Do not handle the plug with wet hands.
    • Always ensure that the heater is switched OFF before attempting to fit
    or remove the eController for programming.
    • Do not expose the eController to any liquids.
    • Keep batteries out of the reach of children. Batteries pose a choking and
    health hazard if swallowed.
    • The eController is not intended for use by young children or infirm
    persons without supervision. Young children must be supervised to
    ensure that they do not play with the eController.
    • It is dangerous to alter the specifications or modify eController, only use
    the eController as recommended by ECONO-HEAT™.
    • If the eController has malfunctioned, or been damaged in any manner,
    return the eController to the nearest authorised
    ECONO-HEAT™ service centre for examination or repair.
    • Under no circumstances should the customer attempt to repair
    eController.
    • The eController should only be repaired by an authorized
    ECONO-HEAT™ service centre. Failure to do so may render the
    warranty void.

    Important
    The eController must only be connected to an ECONO-HEAT™ wall panel
    heater whose voltage and frequency comply with the specifications given on
    the eController rating plate. The eController can be used with the following
    ECONO-HEAT™ wall panel heater type numbers: EP44-01; EP44-02; EP4403; EP44-04; EP44-06; EP44-07.

    TWO YEAR WARRANTY
    ECONO-HEAT™ warrants that your eController is free from manufacturing
    defects, subject to the following conditions:
    • Such warranty shall be to repair or replace the goods in the event of any
    manufacturing defect (which shall exclude fair wear and tear) notified
    to ECONO-HEAT™ within 2 (two) years of the original purchase (“the
    Warranty Period”);
    • Any liability on ECONO-HEAT™ hereunder shall be conditional on the
    goods having been stored and installed properly (in accordance with

    ECONO-HEAT’s installation instructions) and, from the date of delivery:
    - Having been used and maintained in accordance with
    ECONO-HEAT’s instructions and/or labelling on the goods;
    - No repairs, alterations thereon having been carried out by the Buyer or
    any third party.
    • The warranty is in substitution for and excludes all expressed or implied
    (whether by law or otherwise) conditions, warranties or obligations of any
    kind relating to fitness for purpose or quality of workmanship, material or
    design, save to the extent that any law prevents such exclusion.

    LIMITATION OF LIABILITY
    1 Save as expressly provided for in these Conditions of Sale, and save
    as may be stipulated to the contrary in the South African Consumer
    Protection Act, 2008, ECONO-HEAT™ shall not be liable to the Purchaser
    (or their employees, servants or agents, contractors or successor
    purchasers) for and direct, indirect, incidental or consequential damages
    of any nature howsoever caused (whether based in delict or contract or
    otherwise) pursuant to or arising in respect of the installation and/or use
    of the goods. This means that if any loss, damage or harm is caused to
    anyone due to the use or installation of these goods, you may not hold
    ECONO-HEAT™ liable in law.
    2 Save as may be stipulated to the contrary in the South African Consumer
    Protection Act, 2008, in respect of any liability of the Seller that has been
    excluded, the Purchaser hereby indemnifies
    ECONO-HEAT Energy Efficient Heating Appliances (Pty) Ltd (its
    members, employees and agents) against all actions, proceedings and
    claims whatsoever brought against it (its members, employees or agents),
    by any third party pursuant to, arising in respect of the installation and/
    or use and/or supply of the goods. This means that if ECONO-HEAT™
    is sued by anyone mentioned in paragraph 1 above arising from the
    installation or use of the product that you as the Purchaser will financially
    indemnify ECONO-HEAT™ against any losses which ECONO-HEAT™
    may suffer, as a result of such law suit.

    introduction
    Thank you for purchasing the eController for your ECONO-HEAT™ wall panel
    heater. As a stand-alone product, the ECONO-HEAT™ wall panel heater has
    proven itself worldwide as a remarkably low-cost energy saver heater. Please
    note, that even without the eController fitted, the heater still works efficiently
    and effectively, creating a warm summer feel inside your home when it’s winter
    outside - while using only 400 watts of electricity! However, the heater can
    also be used in conjunction with the eController to control hour-by-hour on/off
    cycles, room temperatures within your home and much, much more!

    ROOM SIZES

    QUICK installation STEPS
    (see pictorial diagram)

    1 Switch the heater OFF before removing or inserting the
    cover plate or accessories. Remove the cover plate from
    the heater using a screwdriver to leverage the retainer
    latch down, while pulling it out.
    2 Once the cover plate is removed, the heater will render
    itself non-operational. Store the cover plate in a safe
    place for safekeeping.
    3 Locate and discard the battery pull-tab on the rear side of
    the eController. Your eController is now ready to program,
    while holding it in hand.
    4 Follow the easy START-UP INSTRUCTIONS below. Once
    completed, simply slot the eController into your heater –
    ready to use.

    START-UP INSTRUCTIONS

    1 After powering the eController up for the first time the
    symbol will flash. Select the temperature unit
    (Celcius)
    or
    (Fahrenheit) with the
    and
    button.
    2 Confirm your selection by pressing the
    button.

    SetTING THE clock
    1 Press and hold the CLOCK
    button for one second.
    2 The clock symbol will start flashing. Set the clock by
    pressing the HOUR
    , MIN
    and DAY
    buttons
    respectively.
    3 Press the
    button to exit.

    MODE SELECTION
    Push the MODE
    button to cycle through the various
    modes - Auto Preset , Auto Preset , Auto
    (custom
    programmable mode), Comfort , Setback , Anti-frost
    , Pilot Wire

    Due to variable factors, it is impossible to specify what size panel or how
    many to install in a room. We do however, recommend the following:
    • For regions with normal winters: 1 x 400 Watt or 2 x 260 Watt per
    approximately 10-12m² of floor area.
    • For regions with very cold winters: 1 x 400 Watt or 2 x 260 Watt per
    approximately 8-10m² of floor area.

    and

    . Press the

    activate the Eco mode and again to exit.

    button to

    MANUAL PROGRAMMING
    Please note: While programming, if no button is pressed within 60
    seconds, the eController will automatically exit the current setup
    mode. Alternatively, press the
    button to exit immediately.

    THE ORIGINAL LOW COST ENERGY-SAVER HEATER



  • Page 2

    digitally integrated THERMOSTAT & TIMER

    Model Nos: 101 and 102
    Please note that this accessory is only compatible with Econo-Heat eHeater+
    model no. 0607 only. 2 year warranty www.econo-heat.com

    SetTING THE comfort AND
    SETBACK TempERATUREs
    Please note: The heater should heat your room to a maximum
    of 23°C approximately.
    1 Press and hold the TEMP
    button for one second.
    2 The Comfort
    Symbol will flash and the comfort
    temperature set point is displayed (default 23°C or 74°F).
    3 Increase or Decrease the temperature set point (7-30°C,
    44-86°F) by pressing the
    and
    buttons.
    4 Confirm by pressing the
    button.
    5 The Setback Symbol will flash and the Setback
    temperature set point is displayed (default 19°C or 66°F)
    6 Increase or Decrease the temperature set point (7-30°C,
    44-86°F) by pressing the
    and
    buttons.
    7 Confirm by pressing the
    button.
    8 The display will advance to Comfort
    setpoint. Exit with
    the
    button.

    SETTING THE AUTO

    MODE

    1 Select the
    mode with the MODE
    button.
    2 Use the DAY
    button to select the day to program, then
    press and hold for 1 second.
    3 The first hour of the day will flash. The hour setting can now
    be adjusted.
    4 Select the mode to be used for that hour of the day.
    5 Comfort
    - The eController will regulate the room

    temperature to the Comfort temperature set point.
    6 Setback - The eController will regulate the room
    temperature to the Setback temperature set point.
    Standby – The eController will keep the heater off,
    7
    while it stays in standby mode.
    8 Select the required mode with the
    and
    buttons.
    9 Move to the next or previous hour with the
    and
    button.
    10 When the last hour (24 hour) is programmed and the
    button is pressed, it will advance to the 0h. When finished
    button or wait for
    with the programming, exit with the
    the 60 second time-out.
    11 To program more days select the day with the DAY
    button press and hold for 1 second and repeat as above.

    REVIEWING your program SETTINGS
    While ,
    and
    mode are selected, press the DAY
    button repeatedly to verify the program for each day. The day
    of the week will flash indicating the verify program mode. The
    eController will automatically exit this mode if the
    button is
    not pressed for five seconds.

    Repeat the procedure to unlock the child lock function.

    REPLACING THE BATTERIES
    CAUTION: Batteries may explode if mistreated. Do not
    recharge, disassemble or dispose of in fire.
    Replace the batteries when the
    “empty battery” symbol
    appears. Only use Type CR2032 batteries. Do not mix used
    and new batteries or batteries of different brands. Always
    replace both batteries simultaneously. Make sure that the
    positive (+) and the negative (-) are facing in the correct
    directions. Promptly dispose of used batteries in accordance
    with local regulations.

    FACTORY RESET
    Follow these steps to restore the eController to its factory
    default settings. Your personal settings will be removed
    permanently.
    1 Turn the heater OFF and remove the eController.
    2 Remove the batteries for 10 seconds or longer.
    3 Replace the batteries and the default factory setting will be
    restored.

    USING THE CHILD LOCK

    Take care of our environment, do not dispose electrical or electronic appliances via household
    waste. Dispose of obsolete or defective electrical appliances via municipal collection points.
    Please help to avoid potential environmental and health impacts through improper waste
    disposal. Contribute to recycling and other forms of utilization of old electric and electronic
    appliances. Your municipality provides with information of collection points for electrical and
    electronic waste.

    Press and hold both the
    and
    buttons for
    2 seconds to set the child lock function (all the buttons are
    then disabled) the lock symbol will appear on the display.

    MODE DESCRIPTIONS
    auto preset 1 This mode offers you a fixed
    weekly preset schedule and cannot be changed.
    Monday to Friday
    Comfort mode is active from 4am - 8am
    and 4pm - 11pm. The rest of the time the heater will
    remain in standby
    mode.
    0h

    4h

    8h

    16h

    23h 0h

    WEEKEND: Saturday and Sunday
    Comfort mode is active from 6am - 11pm.
    The rest of the time the heater will remain in standby
    mode.
    0h

    6h

    23h 0h

    auto preset 2 This mode offers you a fixed
    weekly preset schedule and cannot be changed.
    EVERYDAY: Monday to Sunday
    Comfort mode is active everyday from
    4am - 8am and 4pm - 11pm. The rest of the time the
    heater will remain in standby
    mode.
    0h

    4h

    8h

    16h

    comfort The room temperature is regulated to
    the Comfort temperature setting continuously. This
    is used when the room is normally occupied for long
    periods of time. Should you wish to change the preset
    default temperature of 23°C or 74°F, see the manual
    programming section of this user manual.

    23h 0h

    AUTO PX (CUSTOM programable mode)
    This is a customisable program mode that allows
    you to select and manually program the temperature
    for every hour
    mode Comfort
    , Setback or
    of the day, each day of the week.

    SETBACK The room temperature is regulated to
    the Setback temperature setting continuously. This
    mode is used to conserve energy, and is recommended if
    the room is unoccupied for more than 2 hours. Typically,
    Setback will be used in holiday homes to combat high
    humidity and mold. Should you wish to change the preset
    default temperature of 19°C or 66°F, see the manual
    programming section of this user manual.
    anti-frost The room temperature is regulated
    to a minimum of 7°C or 45°F continuously. This
    is used to frost protect the room when it is not being
    occupied for 24 hours or longer.
    PILOT WIRE Applicable to heater type no. EP44-01
    only (mainly found in France). This mode makes
    use of an additional wire linked between the heaters and
    a programmer that activates the various modes. Modes
    , Setback , Anti-Frost
    supported are: Comfort
    and
    . If the heater is not wired with the pilot wire,
    this mode will revert to Comfort
    .
    standby The eController is active in standby
    mode, however no power is supplied to the heater.

    eco (energy saving mode) This easy-1-click
    mode is used to save you even more electricity
    when the heater is being used. The heat of the panel is maintained, however the power supply is switched ON and
    OFF intermittently saving further electricity consumption.

    A

    ECO mode

    B

    MODE select

    Left

    C

    Set Hour

    Up

    Set Clock

    D

    Set Minute

    Down

    Set Temperature

    E

    Set Day

    Right

    Set Manual Program

    F

    MODE indicator lights

    G

    LCD display

    H

    Cover plate

    J

    eController Integrated Thermostat
    & Timer Accessory

    Mode indicator lights
    Please note: The indicator lights will only illuminate
    once the eController is plugged into the heater.
    F1
    Comfort mode is active
    F2
    Setback mode is active
    F3
    Anti-frost mode is active
    F4
    ECO mode is active
    F5
    The eController is powered by the mains
    Please note: When active, the display screen
    shows the time of the day.The temperature unit
    (Celcius) or
    (Fahrenheit) is only shown
    on the display screen when setting the Comfort
    and Setback temperatures.
    When the thermostat switches the heater off
    (temporarily), the light of the heater’s on/off
    switch will appear ‘off’. Leave the heater on/off
    switch in the ‘on’ position during this period.

    sleep When the eController is not powered by the mains and running only from battery power it will enter a sleep mode
    after 2 minutes when no button is pressed (the display turns off). Press the
    button to wake the eController from
    the sleep mode.

    THE ORIGINAL LOW COST ENERGY-SAVER HEATER






Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Art des Missbrauchs:

Zum Beispiel antisemitische Inhalte, rassistische Inhalte oder Material, das zu einer Gewalttat führen könnte.

Beispielsweise eine Kreditkartennummer, persönliche Identifikationsnummer oder unveröffentlichte Privatadresse. Beachten Sie, dass E-Mail-Adressen und der vollständige Name nicht als private Informationen angesehen werden.

Forenregeln

Um zu sinnvolle Fragen zu kommen halten Sie sich bitte an folgende Spielregeln:

Neu registrieren

Registrieren auf E - Mails für Econo-Heat EController model 102 wenn:


Sie erhalten eine E-Mail, um sich für eine oder beide Optionen anzumelden.


Holen Sie sich Ihr Benutzerhandbuch per E-Mail

Geben Sie Ihre E-Mail-Adresse ein, um das Handbuch zu erhalten von Econo-Heat EController model 102 in der Sprache / Sprachen: Englisch als Anhang in Ihrer E-Mail.

Das Handbuch ist 0,8 mb groß.

 

Sie erhalten das Handbuch in Ihrer E-Mail innerhalb von Minuten. Wenn Sie keine E-Mail erhalten haben, haben Sie wahrscheinlich die falsche E-Mail-Adresse eingegeben oder Ihre Mailbox ist zu voll. Darüber hinaus kann es sein, dass Ihr ISP eine maximale Größe für E-Mails empfangen kann.

Andere Handbücher von Econo-Heat EController model 102

Econo-Heat EController model 102 Bedienungsanleitung - Deutsch - 2 seiten


Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Wenn Sie innerhalb von 15 Minuten keine E-Mail mit dem Handbuch erhalten haben, kann es sein, dass Sie eine falsche E-Mail-Adresse eingegeben haben oder dass Ihr ISP eine maximale Größe eingestellt hat, um E-Mails zu erhalten, die kleiner als die Größe des Handbuchs sind.

Ihre Frage wurde zu diesem Forum hinzugefügt

Möchten Sie eine E-Mail erhalten, wenn neue Antworten und Fragen veröffentlicht werden? Geben Sie bitte Ihre Email-Adresse ein.



Info