Bedienungsanleitung Eiki LC-X85 (Seite 3 von 120) (Englisch)

543729

Zoom out

Zoom in

Vorherige Seite

1/120

Nächste Seite

- 3 -

English

All the safety and operating instructions should be read

before the product is operated.

Read all of the instructions given here and retain them

for later use. Unplug this projector from AC power supply

before cleaning. Do not use liquid or aerosol cleaners. Use

a damp cloth for cleaning.

Follow all warnings and instructions marked on the

projector.

For added protection to the projector during a lightning

storm, or when it is left unattended and unused for long

periods of time, unplug it from the wall outlet. This will

prevent damage due to lightning and power line surges.

Do not expose this unit to rain or use near water... for

example, in a wet basement, near a swimming pool, etc...

Do not use attachments not recommended by the

manufacturer as they may cause hazards.

Do not place this projector on an unstable cart, stand,

or table. The projector may fall, causing serious injury

to a child or adult, and serious damage to the projector.

Use only with a cart or stand recommended by the

manufacturer, or sold with the projector. Wall or shelf

mounting should follow the manufacturer’s instructions,

and should use a mounting kit approved by the

manufacturers.

An appliance and cart combination

should be moved with care. Quick

stops, excessive force, and uneven

surfaces may cause the appliance

and cart combination to overturn.

Slots and openings in

the back and side of the cabinet are

provided for ventilation, to ensure reliable operation of the

equipment and to protect it from overheating.

The openings should never be covered with cloth or other

materials, and the bottom opening should not be blocked

by placing the projector on a bed, sofa, rug, or other

similar surface. This projector should never be placed near

or over a radiator or heat register.

WARNING: ● THIS APPARATUS MUST BE EARTHED.

● TO REDUCE THE RISK OF FIRE OR ELECTRIC

SHOCK, DO NOT EXPOSE THIS APPLIANCE

TO RAIN OR MOISTURE.

NOTE FOR CUSTOMERS IN THE US

Hg LAMP(S) INSIDE THIS PRODUCT CONTAIN MERCURY

AND MUST BE RECYCLED OR DISPOSED OF ACCORDING TO

LOCAL, STATE OR FEDERAL LAWS.

CAUTION

Not for use in a computer room as defined in the

Standard for the Protection of Electronic Computer/

Data Processing Equipment, ANSI/NFPA 75.

EIKI Deutschland GmbH

Am Frauwald 12, D-65510 Idstein, Germany

EIKI Industrial Company Limited.

4-12 Banzai-Cho, Kita-Ku, Osaka, 530-0028 Japan

This projector should not be placed in a built-in installation

such as a book case unless proper ventilation is provided.

Never push objects of any kind into this projector through

cabinet slots as they may touch dangerous voltage points

or short out parts that could result in a fire or electric

shock. Never spill liquid of any kind on the projector.

Do not install the projector near the ventilation duct of air-

conditioning equipment.

This projector should be operated only from the type of

power source indicated on the marking label. If you are not

sure of the type of power supplied, consult your authorized

dealer or local power company.

Do not overload wall outlets and extension cords as this

can result in fire or electric shock. Do not allow anything to

rest on the power cord. Do not locate this projector where

the cord may be damaged by persons walking on it.

Do not attempt to service this projector yourself as

opening or removing covers may expose you to dangerous

voltage or other hazards. Refer all servicing to qualified

service personnel.

Unplug this projector from wall outlet and refer servicing to

qualified service personnel under the following conditions:

a. When the power cord or plug is damaged or frayed.

b. If liquid has been spilled into the projector.

c. If the projector has been exposed to rain or water.

d. If the projector does not operate normally by following

the operating instructions. Adjust only those controls

that are covered by the operating instructions as

improper adjustment of other controls may result in

damage and will often require extensive work by a

qualified technician to restore the projector to normal

operation.

e. If the projector has been dropped or the cabinet has

been damaged.

f. When the projector exhibits a distinct change in

performance-this indicates a need for service.

When replacement parts are required, be sure the service

technician has used replacement parts specified by the

manufacturer that have the same characteristics as the

original part. Unauthorized substitutions may result in fire,

electric shock, or injury to persons.

Upon completion of any service or repairs to this projector,

ask the service technician to perform routine safety

checks to determine that the projector is in safe operating

condition.

TÜRK KULLANICILAR İÇİN

Bu ürün, EEE yönetmeliğine uygundur.

(ELEKTRİKLİ VE ELEKTRONİK EŞYALARDA BAZI ZARARLI

MADDELERİN KULLANIMININ SINIRLANDIRILMASINA DAİR

YÖNETMELİK)

KR7BL-A_quick.indb 3KR7BL-A_quick.indb 3 09.8.27 2:34:22 PM09.8.27 2:34:22 PM

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Eiki LC-X85 Seite 3

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Andere Handbücher von Eiki LC-X85

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info