662492
6
Zoom out
Zoom in
Vorherige Seite
1/112
Nächste Seite
4
• Before using the AquaSense™ jug you need to activate the
PUREADVANTAGE™ lter in the following way
o Place the jug under the tap and lter 2 litres of water.
o Discard the ltered water before start using the jug.
Filter through 2 litres of water
2. Filling the AquaSense™ Jug
• Place the jug under the tap with the opening positioned directly under
the tap water outlet.
• Hold the jug under the tap and turn the water on. The pressure of the tap
water will open the pour through lling lid and start lling the hopper.
3. AquaSense™ Capacity
• Large Jug: 1.6 liters ltered water capacity
(2.3 liters total capacity)
• Small Jug: 1.2 liters ltered water capacity
(1.6 liters total capacity)
4. Lifetime for the PUREADVANTAGE™ lter
• The PUREADVANTAGE™ lter achieves a lter capacity of approximately
150 liter of tap water.
• We recommend changing the PUREADVANTAGE™ lter after 30 days to
keep optimized performance.
• To change the lter; pull the ring on the PUREADVANTAGE™ lter.
5. Store the PUREADVANTAGE™ lter
Store the sealed PUREADVANTAGE™ lter in a cold and dry place in no direct
sun light sealed in the plastic packaging to keep the optimized performance
of your lter.
6. Care of AquaSense™ and the PUREADVANTAGE™ lter
• Discard the water if it’s not is used for two days.
• We recommend to store your water lter in a cool place and remember
that water is a foodstu. Please consume ltered water within one to two
days.
• The AquaSense™ Jug (excluding the Life Time Indicator) is dish washer
safe.
• Before cleaning your AquaSense™ Jug in the dish washer, take out the Life
Time Indicator.
7. Life Time Indicator
The Life Time Indicator reminds you when it is time to change the
PUREADVANTAGE™ lter. Each dot refers to a lifetime of about one week.
The recommended PUREADVANTAGE™ lter lifetime of four weeks (30 days)
equals four dots (100%). After each week one circle will disappear to show the
remaining lter life time.
This is how the Life Time Indicator works:
1. Push the STATUS button to activate the display.
2. To see the status of the PUREADVANTAGE™ lter anytime; press the
button 0.5-2 seconds. For example; when four lights are visible the
lter is 100% full with four weeks of usage left.
3. To reset the timing press the button 3 seconds or more.
4. Change the PUREADVANTAGE™ lter when all the lights are blinking.
6

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Forenregeln

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Art des Missbrauchs:

Zum Beispiel antisemitische Inhalte, rassistische Inhalte oder Material, das zu einer Gewalttat führen könnte.

Beispielsweise eine Kreditkartennummer, persönliche Identifikationsnummer oder unveröffentlichte Privatadresse. Beachten Sie, dass E-Mail-Adressen und der vollständige Name nicht als private Informationen angesehen werden.

Forenregeln

Um zu sinnvolle Fragen zu kommen halten Sie sich bitte an folgende Spielregeln:

Neu registrieren

Registrieren auf E - Mails für Electrolux AquaSense EWFLJL1 wenn:


Sie erhalten eine E-Mail, um sich für eine oder beide Optionen anzumelden.


Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Wenn Sie innerhalb von 15 Minuten keine E-Mail mit dem Handbuch erhalten haben, kann es sein, dass Sie eine falsche E-Mail-Adresse eingegeben haben oder dass Ihr ISP eine maximale Größe eingestellt hat, um E-Mails zu erhalten, die kleiner als die Größe des Handbuchs sind.

Ihre Frage wurde zu diesem Forum hinzugefügt

Möchten Sie eine E-Mail erhalten, wenn neue Antworten und Fragen veröffentlicht werden? Geben Sie bitte Ihre Email-Adresse ein.



Info