580359
54
Zoom out
Zoom in
Vorherige Seite
1/56
Nächste Seite
Appendix C: Glossary
śŖ
CommPact User Manualȱ
ȱ
G
Global Chime A feature that enables/disables the Chime feature for the entire
system – see Chime.
I
Instant Arm An arming method that cancels the entry delay after the system
has been Part or Perimeter armed.
K
Keyfob Handheld wireless transmitters used to remotely control the
system.
L
LAN IP Address The address that your home router has assigned to the Control
System.
Limited Code A user code that automatically expires 24 hours after it is
programmed.
Log See Event Log
M
Master Code The only user code with the ability to program other user codes.
The master code also has exclusive access to specific system
functions.
Medical
Emergency
A type of alarm that informs the monitoring service that the user
is in need of medical assistance.
Message Center An optional feature that enables users to record messages to be
played back by other users.
N
Non-Controlled
Code
A user code that does not cause the system to notify the
monitoring service when used to arm or disarm. The system only
reports if the code is used to disarm after an alarm.
O
One-Key
Arming
Arming the system without the need for a valid user code.
P
Panic Alarm A user initiated event that alerts the monitoring service in the
event of an emergency.
Part Arming An arming method that is designed to activate a certain section of
the premises.
Perimeter
Arming
An arming method that is designed to activate the detectors
protecting the doors and windows while enabling residents to
move freely on the premises.
PGM Programmable output that is triggered according to specific
system status conditions, or by remote command sent via PSTN,
GSM, Ethernet, keyfob, keypad, or Remote Programmer.
R
Ready The state in which all zones are closed and the system is ready to
be armed.
Remote
Firmware
Update
Control System's firmware update from a remote PC using WEB
communication.
Restore Restore of the normal state when the trouble is repaired. For
example, if AC power is reconnected, an AC Loss Restore event
code is sent to the central station.
54

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Forenregeln

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Art des Missbrauchs:

Zum Beispiel antisemitische Inhalte, rassistische Inhalte oder Material, das zu einer Gewalttat führen könnte.

Beispielsweise eine Kreditkartennummer, persönliche Identifikationsnummer oder unveröffentlichte Privatadresse. Beachten Sie, dass E-Mail-Adressen und der vollständige Name nicht als private Informationen angesehen werden.

Forenregeln

Um zu sinnvolle Fragen zu kommen halten Sie sich bitte an folgende Spielregeln:

Neu registrieren

Registrieren auf E - Mails für Electronics Line Commpact wenn:


Sie erhalten eine E-Mail, um sich für eine oder beide Optionen anzumelden.


Andere Handbücher von Electronics Line Commpact

Electronics Line Commpact Kurzanleitung - Deutsch - 4 seiten

Electronics Line Commpact Kurzanleitung - Holländisch - 4 seiten


Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Wenn Sie innerhalb von 15 Minuten keine E-Mail mit dem Handbuch erhalten haben, kann es sein, dass Sie eine falsche E-Mail-Adresse eingegeben haben oder dass Ihr ISP eine maximale Größe eingestellt hat, um E-Mails zu erhalten, die kleiner als die Größe des Handbuchs sind.

Ihre Frage wurde zu diesem Forum hinzugefügt

Möchten Sie eine E-Mail erhalten, wenn neue Antworten und Fragen veröffentlicht werden? Geben Sie bitte Ihre Email-Adresse ein.



Info