Bedienungsanleitung Elektra Beckum PKF 255 V8 - Profi-line (Seite 5 von 24) (Englisch)

578845

Zoom out

Zoom in

Vorherige Seite

1/24

Nächste Seite

2.3

PKF 255 V8

Please read first!

· Read these instructions before commissioning.

Pay special attention to the safety information.

· If you notice a transport damage while unpack-

ing, notify your supplier immediately. Do not

operate the machine!

· Dispose of the packing environmentally friendly.

Bring to a proper collecting point.

· Keep these instructions for reference on any

issues you may be uncertain about.

· If you lend or sell this machine be sure to have

the instructions to go with it.

Safety information

Specified conditions of use

This machine is intended for ripping and crosscut-

ting of solid timber, faced board, particle board,

wood-core plywood and similar wood-derived mate-

rials.

Do not cut round stock without a suitable fixture, as

the rotating saw blade could turn the workpiece.

Any other use is considered to be not as specified

and not allowed. Damages caused by unspecified

use are not covered by the manufacturer's liability.

Modification of the machine or use of parts not

tested and approved by the equipment manufac-

turer can cause unforeseeable damage.

General safety information

Follow the basic safety requirements for the opera-

tion of power tools, to keep the risk of

- personal injury

- fire

- electric shock

as little as possible.

Please note in particular:

A circular saw is a dangerous tool which can, due to

operator carelessness, cause serious personal

injury. It is therefore recommended you follow the

safety information given below, and know and follow

the legal regulations pertaining to the operation of

circular saws.

Danger!

The circular saw shall only be started and

operated by persons familiar with circular

saws, and who are at any time aware of the

dangers associated with the operation of

such tool.

Persons under 16 years of age shall use this

saw only under the supervision of an instruc-

tor in the course of their vocational training.

The following residual risks do principally

exist with circular saws, and can not, even by

employing safety devices, completely elimi-

nated:

- Risk of injury by touching the revolving saw

blade: Keep sufficient distance to the saw

blade when sawing. Use push stick if nec-

essary.

Prevent adverse body positions. Ensure

firm footing, and keep your balance at all

times.

- Risk of injury by touching the saw blade at

standstill: Lower the saw blade after saw-

ing until the blade guards rest on the table.

Wear gloves when changing blades.

- Hazard by cluttered work area (e.g. by cut-

offs on the floor):

Always keep work area clean.

- Risk of injury by objects being caught dur-

ing sawing by the revolving saw blade (e.g.

tools on the saw table or metal parts hid-

den in the workpiece):

Keep saw table clean. If in doubt check

workpiece for inclusion of foreign matter.

- Risk of kickback (workpiece is caught by

the saw blade and thrown against the oper-

ator):

Always work with a properly set riving

knife. Keep blade sharp and do not jam.

- Hazard generated by environmental influ-

ences:

Do not operate the circular saw in rain or in

damp environment. Ensure sufficient light-

ing. Do not operate the circular saw near

inflammable liquids or gases.

- Danger to other persons in the work area:

Keep bystanders, particularly children, out

of the danger zone.

- Hazard generated by overloading:

Use circular saw within its limits, and only

as specified.

- Danger by machine faults:

Check the circular saw for damage before

every use. Before switching ON check to

see that keys or setting tools are removed.

Do not operate the saw with a damaged

ON/OFF switch. Keep knobs and handles

free of oil and grease.

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Elektra Beckum PKF 255 V8 - Profi-line Seite 5

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info