Bedienungsanleitung Elektra E61 (Seite 10 von 13) (Englisch)

633185

Zoom out

Zoom in

Vorherige Seite

1/13

Nächste Seite

E61

Instructions For Use. Page 10

REPEAT

By pressing the ONE/ALL button once,

you can play the track you have just heard

over and over again. The word REPEAT

ONE appears on the display at the same time.

If you press the ONE/ALL button

twice, you can play the entire disc or the

programmed selections over and over

again. The word ALL appears on the dis-

play.

You can switch off the repeat func-

tion by pressing the ONE/ALL button

again.

EDIT

If you want to pre-program the re-

cording time when you record to a cassette,

press the button marked EDIT. The CD

player automatically selects a CD track

which can be recorded in the time you have

pre-programmed. Prepare your stereo set

for recording according to the steps de-

scribed in the operating instructions.

1. Insert a CD. The number of titles

in addition to the total playback time are

displayed on the display unit.

2. Then press the EDIT key and by

using the "1 -+10" keys you can change

the length of the recording time on both

sides of the tape, e.g. the duration of a 30-

minute recording (press "+10" 3 times and

then "0")

3. Now the tracks that will be recorded

on side A during time set will appear. Fol-

lowing this the tracks that can be recorded

during the time set on side B will appear. The

CD recorder then goes into the Pause posi-

tion.

4. After pressing PLAY/PAUSE, the

CD player starts to playback the titles that

can be recorded in the pre-programmed pe-

riod of time.

5. After playing back these titles, the

real recording time for side B is displayed

for the same period as has been selected

for side A, e.g.:

Now turn the cassette in the cassette

deck to the other side and set the cassette

recorder to recording mode. Press PLAY/

PAUSE to playback the titles for side B.

Note: The recording time of side B

can no longer be changed.

CD playback takes place with the

Auto Space function, i.e. with a pause of 4

seconds between each track. The function

is useful for tape recordings when the re-

corder is equipped with an Automatic

Track Search facility.

PROGRAM MEMORY

The built-in program memory allows

you to store up to 32 tracks and to play

them back in whatever order you wish. If

you should accidentally enter more than

32 tracks, the memory will stop storing

tracks after it has reached 32. It is possible

to store a track more than once in the same

program if desired.

Example: You wish to listen to tracks

14, 2, 9, 9,12 and 22 in that order on a disc

with 24 tracks. When the scanner has read

the disc, 24 and the total playing time will

appear on the display.

Press the PROGRAM push-button to

switch over to programming mode . Press the

SKIP push-button until the desired track

number appears on the display.

Track 14 can be stored under pro-

gramme number 1 by pressing the PRO-

GRAM button. The message below ap-

BASIC OPERATION

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Elektra E61 Seite 10

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info