600919
5
Zoom out
Zoom in
Vorherige Seite
1/6
Nächste Seite
PROGRAMMING
SELECT dAY
TIME CHANGES
CONSTANTS
ENGLISH
HYSTERESIS
VERSION
5
PROG
CONST
Setting the control parameters.
1
2
3
CESKY
The hysteresis can be set from 0,1 to 6°C. Example: If the hys-
teresis is 1 °C and the required temperature 20 °C, the thermostat
switches off at 20 °C and on again at 19 °C.
4
VERSION (restoring the default settings)
Press twice the “ MENU “ button, choose the CONST mode by
turning the “ “ button, and press the “ “ button to confi rm.
Language selection (CZ/PL/EN/DE).
Choose the language by turning the “ “ button and press the
“ button to confi rm.
HYSTEREZE
Set the value by turning he “ “ button and press the “ “ button
to confi rm.
TEST
We recommend you to use the test when you fi rst use the
thermostat!
After you turn the “ “ button, the test starts and the output relay
is switched on/off several times (the display shows the ON/OFF
message). Pressing the “
“ button, you can view the next
constant; to return to the main menu, press the “
“ button.
Firmware version, informative parameter only.
If you press the “
“ button long (for about 3 s), the RESET
message appears shortly on the LCD and the thermostat returns
to the default settings!
(CONSTANTS)
(Czech language set by default)
(0.5°C set by default)
Setting the weekly program with up to 6 changes per day.
Press twice the “ MENU “ button, choose the PROG mode by turning the
“ button, and press the“ “ button to confi rm. The number of days
to be programmed is blinking on the display; choose one of the
options by turning the “
“ button (you can program day-by-day or 1-5 =
Mon-Fri, 6-7 = Sat-Sun or 1-7 =Mon-Sun) and press the “
“ button to
confi rm. The 1st change time starts fl ashing; set the time by turning the
button and press the “ “ button to confi rm. Set the temperature
for this time by turning the “
“ button and press again the “ “ button
to confi rm. The 2nd change time appears on the display. Proceed in the
same way as with the fi rst change setting. In this way, you can set up to
6 temperature changes per day. To return to the menu, press the
“.button.
After changing the preset program, check whether all the changes made
conform to your requirements!
It is not necessary to apply all six changes in one day!
(PROGRAMMING)
5

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Forenregeln
1

Forum

elektrobock-pt-22

Suche zurücksetzen

  • bei Programmierung wurde 1-7 eingestellt. Es erscheint ber z. B. 3, es soll aber Montag erscheinen Eingereicht am 3-7-2023 10:19

    Antworten Frage melden

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Art des Missbrauchs:

Zum Beispiel antisemitische Inhalte, rassistische Inhalte oder Material, das zu einer Gewalttat führen könnte.

Beispielsweise eine Kreditkartennummer, persönliche Identifikationsnummer oder unveröffentlichte Privatadresse. Beachten Sie, dass E-Mail-Adressen und der vollständige Name nicht als private Informationen angesehen werden.

Forenregeln

Um zu sinnvolle Fragen zu kommen halten Sie sich bitte an folgende Spielregeln:

Neu registrieren

Registrieren auf E - Mails für Elektrobock PT 22 wenn:


Sie erhalten eine E-Mail, um sich für eine oder beide Optionen anzumelden.


Andere Handbücher von Elektrobock PT 22

Elektrobock PT 22 Bedienungsanleitung - Deutsch - 6 seiten


Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Wenn Sie innerhalb von 15 Minuten keine E-Mail mit dem Handbuch erhalten haben, kann es sein, dass Sie eine falsche E-Mail-Adresse eingegeben haben oder dass Ihr ISP eine maximale Größe eingestellt hat, um E-Mails zu erhalten, die kleiner als die Größe des Handbuchs sind.

Ihre Frage wurde zu diesem Forum hinzugefügt

Möchten Sie eine E-Mail erhalten, wenn neue Antworten und Fragen veröffentlicht werden? Geben Sie bitte Ihre Email-Adresse ein.



Info