704007
83
Zoom out
Zoom in
Vorherige Seite
1/84
Nächste Seite
81
Troubleshooting
Condition Cause Reference
The needle thread
breaks
1. The needle thread is not threaded properly.
2.
The needle thread tension is too tight.
3. The needle is bent or blunt.
4. The needle is incorrectly inserted.
5. The needle thread is not set under the presser foot when start sewing.
6.
The thread is tangled around the spool.
Page 19
Page 12
Page 14
Page 14
Page 26
Use the spool holder.
The bobbin thread
breaks
1. The bobbin thread is not threaded properly in the bobbin holder.
2. Lint has collected in the bobbin holder.
3. The bobbin is damaged and does not turn smoothly.
Page 18
Page 78
Change the bobbin.
The needle breaks 1. The needle is incorrectly inserted.
2.
The needle clamp screw is loose.
3. The needle is too ne for the fabric being used.
4. An inappropriate presser foot is used.
Page 14
Page 14
Page 14
Use the correct foot.
Skipped stitches 1. The needle is incorrectly inserted, bent or blunt.
2.
The needle and/or threads are not suitable for the work being sewn.
3. A blue tip needle is not being used for sewing stretch, very ne fabrics
and synthetics.
4. The needle thread is not threaded properly.
5. A poor quality needle is used.
Page 14
Page 14
Use the stretch stitch
needle.
Page 19
Change the needle.
Seam puckering 1.
The needle thread tension is too tight.
2. The needle thread is not threaded properly.
3. The needle is too heavy for the fabric being sewn.
4. The stitch length is too long for the fabric.
5.
The foot pressure is not adjusted properly.
6.
A stabilizer is not used when sewing very ne fabrics.
Page 12
Page 19
Page 14
Make stitch shorter.
Pa ge 11
Apply a stabilizer.
The fabric is not
feeding smoothly
1.
The feed dog is packed with lint.
2.
The stitches are too ne.
3.
The feed dog is not raised after ”drop feed” sewing.
Page 78
Make stitch longer.
Pa ge 11
Loops on the seams 1.
The needle thread tension is too loose.
2. The needle is too thick or too ne for the fabric.
Page 12
Page 14
The machine does
not work
1.
The machine is not plugged in or foot control is not connected.
2. Thread has been caught in the hook race.
3.
The presser foot is not lowered.
Page 7
Page 78
Pa ge 11
Buttonhole sewing
is not sewn properly
1. The stitch density is not suitable for the fabric being sewn.
2. The interfacing has not been used for the stretch or synthetic fabric.
3.
The buttonhole lever is not lowered.
Page 47
Apply an interfacing.
Page 45
The machine is
noisy
1.
Thread has been caught in the hook race.
2.
Lint has built up in the hook race or bobbin holder.
Page 78
Page 78
Layers shift 1. The foot pressure is not suitable for fabrics being sewn. Pa ge 11
Auto thread cutting
failed
1. Thread is too thick for the auto thread cutting.
2.
Threads have been caught in the thread cutter mechanism.
Page 8
Page 78
The stitch pattern
cannot be selected.
1.
The stitch pattern is 58 or 60 in mode 2 (Bridge stitches). Page 70
83

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Forenregeln

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Art des Missbrauchs:

Zum Beispiel antisemitische Inhalte, rassistische Inhalte oder Material, das zu einer Gewalttat führen könnte.

Beispielsweise eine Kreditkartennummer, persönliche Identifikationsnummer oder unveröffentlichte Privatadresse. Beachten Sie, dass E-Mail-Adressen und der vollständige Name nicht als private Informationen angesehen werden.

Forenregeln

Um zu sinnvolle Fragen zu kommen halten Sie sich bitte an folgende Spielregeln:

Neu registrieren

Registrieren auf E - Mails für Elna eXperience 580 wenn:


Sie erhalten eine E-Mail, um sich für eine oder beide Optionen anzumelden.


Andere Handbücher von Elna eXperience 580

Elna eXperience 580 Bedienungsanleitung - Deutsch - 84 seiten

Elna eXperience 580 Bedienungsanleitung - Französisch - 84 seiten


Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Wenn Sie innerhalb von 15 Minuten keine E-Mail mit dem Handbuch erhalten haben, kann es sein, dass Sie eine falsche E-Mail-Adresse eingegeben haben oder dass Ihr ISP eine maximale Größe eingestellt hat, um E-Mails zu erhalten, die kleiner als die Größe des Handbuchs sind.

Ihre Frage wurde zu diesem Forum hinzugefügt

Möchten Sie eine E-Mail erhalten, wenn neue Antworten und Fragen veröffentlicht werden? Geben Sie bitte Ihre Email-Adresse ein.



Info