704004

Elna eXtend 264 Seite 76

76
Zoom out
Zoom in
Vorherige Seite
1/84
Nächste Seite
70
CARE OF YOUR MACHINE
Replacing the Upper Knife
To remove:
z
Turn off the power switch and unplug the machine.
x
Open the looper cover and side cover.
c
Deactivate the upper knife.
v
Remove the hexagonal bolt, and remove the upper
knife.
q
Upper knife
w
Hexagonalbolt
e
Stopperpin
r
Lowerknife
36
Replacing the Upper Knife
To remove:
1.
Turn off the power switch and unplug the machine.
2. Open the looper cover and side cover.
3. Deactivate the upper knife.
4. Remove the hexagonal bolt, and remove the
upper knife.
Upper knife
Hexagonal bolt
Stopper pin
Lower knife
To attach:
1. Insert new upper knife into the groove of knife
holder and stopper pin, then tighten the
hexagonal bolt slightly.
2. Turn the upper knife holder to cutting position.
3. Turn the handwheel toward you until the upper
knife comes to its lowest position.
Loosen the hexagonal bolt, and adjust the
position of the upper knife so that the edge of the
upper knife overlaps 0.8 to 1.5 mm (3/64´´) from
the edge of lower knife as illustrated.
Then tighten the hexagonal bolt firmly.
4. Close the looper cover and side cover.
Cleaning Upper Knife Area
1.
Turn off the power switch and unplug the machine.
2. Open the looper cover.
Remove the waste pieces to the front with a lint
brush or waste scraps.
 You may use a vacum cleaner to clean the upper
knife area or feed dog.
 The lower knife will last over one year in normal
use. However, if you run over a pin or a hard
object, it may be required to replace both upper
and lower knives at the same time.
CARE OF YOUR MACHINE
0.8 ~ 1.5 mm (3/64˝)
36
Replacing the Upper Knife
To remove:
1.
Turn off the power switch and unplug the machine.
2. Open the looper cover and side cover.
3. Deactivate the upper knife.
4. Remove the hexagonal bolt, and remove the
upper knife.
Upper knife
Hexagonal bolt
Stopper pin
Lower knife
To attach:
1. Insert new upper knife into the groove of knife
holder and stopper pin, then tighten the
hexagonal bolt slightly.
2. Turn the upper knife holder to cutting position.
3. Turn the handwheel toward you until the upper
knife comes to its lowest position.
Loosen the hexagonal bolt, and adjust the
position of the upper knife so that the edge of the
upper knife overlaps 0.8 to 1.5 mm (3/64´´) from
the edge of lower knife as illustrated.
Then tighten the hexagonal bolt firmly.
4. Close the looper cover and side cover.
Cleaning Upper Knife Area
1.
Turn off the power switch and unplug the machine.
2. Open the looper cover.
Remove the waste pieces to the front with a lint
brush or waste scraps.
 You may use a vacum cleaner to clean the upper
knife area or feed dog.
 The lower knife will last over one year in normal
use. However, if you run over a pin or a hard
object, it may be required to replace both upper
and lower knives at the same time.
CARE OF YOUR MACHINE
0.8 ~ 1.5 mm (3/64˝)
36
Replacing the Upper Knife
To remove:
1.
Turn off the power switch and unplug the machine.
2. Open the looper cover and side cover.
3. Deactivate the upper knife.
4. Remove the hexagonal bolt, and remove the
upper knife.
Upper knife
Hexagonal bolt
Stopper pin
Lower knife
To attach:
1. Insert new upper knife into the groove of knife
holder and stopper pin, then tighten the
hexagonal bolt slightly.
2. Turn the upper knife holder to cutting position.
3. Turn the handwheel toward you until the upper
knife comes to its lowest position.
Loosen the hexagonal bolt, and adjust the
position of the upper knife so that the edge of the
upper knife overlaps 0.8 to 1.5 mm (3/64´´) from
the edge of lower knife as illustrated.
Then tighten the hexagonal bolt firmly.
4. Close the looper cover and side cover.
Cleaning Upper Knife Area
1.
Turn off the power switch and unplug the machine.
2. Open the looper cover.
Remove the waste pieces to the front with a lint
brush or waste scraps.
 You may use a vacum cleaner to clean the upper
knife area or feed dog.
 The lower knife will last over one year in normal
use. However, if you run over a pin or a hard
object, it may be required to replace both upper
and lower knives at the same time.
CARE OF YOUR MACHINE
0.8 ~ 1.5 mm (3/64˝)
To attach:
z
Insert new upper knife into the groove of knife holder
and stopper pin, then tighten the hexagonal bolt
slightly.
x
Turn the upper knife holder to cutting position.
c
Turn the handwheel toward you until the upper knife
comes to its lowest position.
Loosenthehexagonalbolt,andadjusttheposition
of the upper knife so that the edge of the upper knife
overlaps 0.8 to 1.5 mm (3/64´´) from the edge of lower
knife as illustrated.
Thentightenthehexagonalboltrmly.
v
Close the looper cover and side cover.
Cleaning Upper Knife Area
z
Turn off the power switch and unplug the machine.
x
Open the looper cover.
Remove the waste pieces to the front with a lint brush
or waste scraps.
* You may use a vacuum cleaner to clean the upper knife
area or feed dog.
* The lower knife will last over one year in normal use.
However,ifyourunoverapinorahardobject,itmay
berequiredtoreplacebothupperandlowerknivesat
the same time.
… 76 …

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Forenregeln

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Art des Missbrauchs:

Zum Beispiel antisemitische Inhalte, rassistische Inhalte oder Material, das zu einer Gewalttat führen könnte.

Beispielsweise eine Kreditkartennummer, persönliche Identifikationsnummer oder unveröffentlichte Privatadresse. Beachten Sie, dass E-Mail-Adressen und der vollständige Name nicht als private Informationen angesehen werden.

Forenregeln

Um zu sinnvolle Fragen zu kommen halten Sie sich bitte an folgende Spielregeln:

Neu registrieren

Registrieren auf E - Mails für Elna eXtend 264 wenn:


Sie erhalten eine E-Mail, um sich für eine oder beide Optionen anzumelden.


Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Wenn Sie innerhalb von 15 Minuten keine E-Mail mit dem Handbuch erhalten haben, kann es sein, dass Sie eine falsche E-Mail-Adresse eingegeben haben oder dass Ihr ISP eine maximale Größe eingestellt hat, um E-Mails zu erhalten, die kleiner als die Größe des Handbuchs sind.

Ihre Frage wurde zu diesem Forum hinzugefügt

Möchten Sie eine E-Mail erhalten, wenn neue Antworten und Fragen veröffentlicht werden? Geben Sie bitte Ihre Email-Adresse ein.



Info