708984
2
Zoom out
Zoom in
Vorherige Seite
1/2
Nächste Seite
2
ADJUSTMENTS
The LED spotlight heads and the PIR cab be adjusted
vertically and horizontal
The beam angle of
the LED spotlight
heads can be
adjusted by turning
the Lamp Cap Rings
around the LED
spotlight heads.
(1) TEST MODE
Turn the LUX control and the TIME control counter
clockwise to the edge the TEST position.
Turn on the wall switch. The light starts warm-up for
1 minute. During 1 minute warm-up period, the light
will stay on.
Walk through the detection area. The light turns on
when you move and turns off when you stop.
For a smaller coverage area, point the sensor down;
for a larger coverage area, point the sensor up.
(2) TIME ADJUSTMENT
The TIME adjustment controls how long the light will stay
on after the motion has been detected.
About 5 seconds About 12 minutes
(3) LUX ADJUSTMENT
The LUX adjustment determines at what
light level the lighting system will start
operating when you set the sensor to
automatic operation.
(
4)
AU
TOMATIC OPERATION
T
urn on the wall switch. When the sensor detects motion,
the light automatically turns on. The built-in photocell
turns the sensor off and on according to the light level
selected by the LUX adjustment.
(
5)
M
ANUAL OVERRIDE CLICK TWICE
T
o keep the light on regardless of the motion, you can
override the Automatic Operation. Turn the wall switch off
and on twice within 4 seconds. The interval between the
first and second operation must be within 0.5 - 2 seconds.
I
n Manual Override mode, the light will remain on for
around 4 ~ 6 hours despite no motion; then the light will
turn off and the motion sensor will be back to Auto
Operation mode automatically.
U
sers can also set the motion sensor back to Auto
Operation by turning off the wall switch for at least 10
seconds and then turn it back on
Power Requirement
AC 220 - 240V / 50 Hz
LP350512P
LP351012P
2 x 5 Watt = 10 Watt
2 x10Watt = 20 Watt
Standby
0.5 Watt
LED
Cree
Color Temperature (K)
5000K
CRI
>70
Lumen LP350512P @8
Lumen LP351012P @80°
850 lumen
1550 lumen
Beam Adjustment
Beam angle MAX 80°
L70 Life Span (hours)
Up to 30000 hr
Detection Angle
Up to 180° at 2m Height
Detection Range
Up to 12m (39.4ft) at 2m
Height
Sensor Swiveling Angle
Up to 45° Leftward
Up to 45° Rightward
Up to 35° Downward
Light Adjustable Angle
Up to 45
o
Leftward
Up to 45° Rightward
Up to 37.5° Downward
Mounting Height
Recommended 2m
(6.56ft) Wall Mount
Time Adjustment
5 seconds - 12 minutes
Lux Adjustment
30 - 200 Lux
Operation Mode
Off/Auto/Manual override
Warm Up Time
About 60 seconds
Working Temperature
-10°C ~ +40°C;
95%RH max
Protection Class
Class II
Protection Degree
IP44
2

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Forenregeln

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Art des Missbrauchs:

Zum Beispiel antisemitische Inhalte, rassistische Inhalte oder Material, das zu einer Gewalttat führen könnte.

Beispielsweise eine Kreditkartennummer, persönliche Identifikationsnummer oder unveröffentlichte Privatadresse. Beachten Sie, dass E-Mail-Adressen und der vollständige Name nicht als private Informationen angesehen werden.

Forenregeln

Um zu sinnvolle Fragen zu kommen halten Sie sich bitte an folgende Spielregeln:

Neu registrieren

Registrieren auf E - Mails für Elro LT3505 wenn:


Sie erhalten eine E-Mail, um sich für eine oder beide Optionen anzumelden.


Andere Handbücher von Elro LT3505

Elro LT3505 Bedienungsanleitung - Deutsch - 2 seiten

Elro LT3505 Bedienungsanleitung - Holländisch - 2 seiten

Elro LT3505 Bedienungsanleitung - Französisch - 3 seiten


Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Wenn Sie innerhalb von 15 Minuten keine E-Mail mit dem Handbuch erhalten haben, kann es sein, dass Sie eine falsche E-Mail-Adresse eingegeben haben oder dass Ihr ISP eine maximale Größe eingestellt hat, um E-Mails zu erhalten, die kleiner als die Größe des Handbuchs sind.

Ihre Frage wurde zu diesem Forum hinzugefügt

Möchten Sie eine E-Mail erhalten, wenn neue Antworten und Fragen veröffentlicht werden? Geben Sie bitte Ihre Email-Adresse ein.



Info