Q: How can I reset the EM6015?
A: Follow the steps below:
1. Make sure the EM6015 is completely started and you see the
EM6015’s image on screen.
2. Click the right mouse button once.
3. Click ‘Main Menu’.
4. Enter your password (if setup before) or leave it empty.
5. Click ‘Advanced’.
6. Click ‘Maintain’.
7. Click ‘Default Settings’.
8. Click ‘All’.
9. Click ‘Load Default’.
10. Click ‘OK’.
11. As soon as the default factory settings have been restored, click ‘OK’
once more.
12. Click ‘Exit’ until you see the notification the EM6015 needs to be
restarted.
13. Click ‘OK’.
Q: I am able to connect a USB device as a backup device. Is a USB hard disk
supported for this function?
A: The EM6015 only support USB memory sticks. Note that only USB memory
sticks with solely a memory function will work. Some memory sticks have
security software on a virtual CD-rom player. Disable this function to be able
to use it on the DVR.
Q: Is there a limit to the hard disk size which can be used in the EM6015?
A: The EM6015 has been tested with 2TB hard disks.
Q: How can I perform a firmware update?
A: If available, download the latest firmware from the Eminent website.
1. Unpack the file(s).
2. Copy the unpack file(s) to a USB memory stick. Note that you need to
have the place ‘dvrupgrade’ folder (with the firmware file) in the root of
the USB memory stick
3. Go to the DVR. Click the right mouse button once on the screen.
4. Go to ‘Main Menu’.
5. Enter your password (if setup before) or leave it empty.
6. Click ‘Apply’.
7. Click ‘Advanced’.
8. Click ‘Maintain’.
9. Click ‘System Update’ after which the EM6015 searches for a
connected USB memory stick.
10. Follow the steps shown on screen.
