Bedienungsanleitung Eminent EM7480 (Seite 14 von 52) (Englisch)

612394

Zoom out

Zoom in

Vorherige Seite

1/52

Nächste Seite

ENGLISH

7.3 Setting up sound

Hint: If the HDMI Output is set to ‘Auto’, the media player will automatically use the

correct settings. When using the ‘Auto’ function, there is no need for manual settings.

7.3.1 If connected directly to your television:

1. Use the navigation buttons to go to ‘Setup’ and press the ‘OK’ button.

2. Select ‘Audio’.

3. The first option displayed is the ‘Preferred audio language’ here you can set what

audio language the EM7480/EM7485 should start to use (if available).

4. If the media player will be used mainly during night-time, the ‘Night Mode’ can be

set to ‘ON’ or ‘Auto’. When set to ‘On’, low-level audio content such as dialog will

be increased making it easier to hear at low volume levels. When set to ‘Auto’, the

intensity of higher-level audio content will also be reduced.

5. Make sure the ‘HDMI Output’ is set to ‘LPCM’ and press the ‘OK’ button.

6. Select ‘Surround Sound’ and press the ‘OK’ button. Select ‘undefined’, ‘5.1 CH’

and press the ‘OK’ button.

7. The last item is ‘Lip Sync’. Usually, ‘AUTO’ is the default setting and is the

recommended setting. Only set the ‘Lip Sync’ option if you experience delay in

audio playback. The maximum setting for lip sync is 500.

7.3.2 If connected to a HDMI audio receiver:

Refer to the manual of your HDMI receiver to make sure which codecs are supported.

The steps shown are default settings and are normally useable for a HDMI receiver.

1. Use the navigation buttons to go to ‘Setup’ and press the ‘OK’ button.

2. Select ‘Audio’.

3. The first option displayed is the ‘Preferred audio language’ here you can set what

audio language the EM7480/EM7485 should start to use (if available).

4. If the media player will be used mainly during night-time, the ‘Night Mode’ can be

set to ‘ON’ or ‘Auto’. When set to ‘On’, low-level audio content such as dialog will

be increased making it easier to hear at low volume levels. When set to ‘Auto’, the

intensity of higher-level audio content will also be reduced.

5. Set ‘HDMI Output’ to ‘RAW’ and press the ‘OK’ button.

6. Select ‘Surround Sound’ and press the ‘OK’ button. If your HDMI receiver supports

‘Dolby True HD’, select ‘HD Audio’. If your HDMI receiver does not support ‘Dolby

True HD’, select ‘5.1 CH’ or ‘Undefined’.

7. The last item is ‘Lip Sync’. Usually, ‘AUTO’ is the default setting and is the

recommended setting. Only set the ‘Lip Sync’ option if you experience delay in

audio playback. The maximum setting for lip sync is 500. However, most HDMI

receivers also have a ‘Lip Sync’ option. It is advisable to use the lip sync option on

the receiver, since most receivers are able to delay and speed up the sound.

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Eminent EM7480 Seite 14

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Andere Handbücher von Eminent EM7480

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info