609379
21
Zoom out
Zoom in
Vorherige Seite
1/24
Nächste Seite
47
IP2160EN - 2015-05-08
DETACH AND DELIVER TO THE CUSTOMER
Regular safety checks and safety
accessories
To meet the national/international requisites and avoid any malfunctioning or risk of injury, carry
out the following operations and checks at least once every 6 months (or according to the fre-
quency of use of the automation).
You are advised to have repairs and adjustments carried out by qualified personnel.
Disconnect the power supply [A] when carrying out cleaning or maintenance tasks.
Task
In the event of
problems
Disconnect the power supply and:
visually check the automation [1]
check the electrical wires [B]
check the condition of the gate [C] and the fixing brackets, and make sure the sliding move-
ment is smooth and even
clean the slide mechanism, rack and pinion
lubricate the rack and pinion
make regular checks to ensure the photocells are clean. Do not use alkaline-based prod-
ucts. Do not use high pressure water jets. The automatic system, function selector switches
and photocells could get damaged. Do not use polishing detergents. Do not rub with abra-
sive products, as they could cause damage.
Reconnect the power supply, then check:
the limit switches (if fitted) are working correctly
the power adjustments are correct (this operation must be carried out by qualified personnel)
the command devices [2] - [4] - [7] (if fitted) are working correctly
the safety devices [5] - [6] - [8] (if fitted) are working correctly If the gate detects an obstacle
while it is opening or closing, it must reverse its movement or stop.
In the event of malfunctioning or ALARM, you must CONTACT CUSTOMER SERVICE and inform
them of the alarm visualised by the LEDs (if fitted).
1
4
7
2
8
3
5
A
C
B
B
5
6
The following safety devices can be installed to protect the
danger areas (in accordance with EN 12453 and EN 12445):
5
XEL2
LAB3
LAB4
Safety photocells
6
SOFA
SOFB
Safety edge
8 GOPAV Radio system for safety edges
21

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Forenregeln

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Art des Missbrauchs:

Zum Beispiel antisemitische Inhalte, rassistische Inhalte oder Material, das zu einer Gewalttat führen könnte.

Beispielsweise eine Kreditkartennummer, persönliche Identifikationsnummer oder unveröffentlichte Privatadresse. Beachten Sie, dass E-Mail-Adressen und der vollständige Name nicht als private Informationen angesehen werden.

Forenregeln

Um zu sinnvolle Fragen zu kommen halten Sie sich bitte an folgende Spielregeln:

Neu registrieren

Registrieren auf E - Mails für Entrematic Ditec NeoS plus - IP2160 wenn:


Sie erhalten eine E-Mail, um sich für eine oder beide Optionen anzumelden.


Andere Handbücher von Entrematic Ditec NeoS plus - IP2160

Entrematic Ditec NeoS plus - IP2160 Bedienungsanleitung - Deutsch - 24 seiten

Entrematic Ditec NeoS plus - IP2160 Bedienungsanleitung - Französisch - 24 seiten


Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Wenn Sie innerhalb von 15 Minuten keine E-Mail mit dem Handbuch erhalten haben, kann es sein, dass Sie eine falsche E-Mail-Adresse eingegeben haben oder dass Ihr ISP eine maximale Größe eingestellt hat, um E-Mails zu erhalten, die kleiner als die Größe des Handbuchs sind.

Ihre Frage wurde zu diesem Forum hinzugefügt

Möchten Sie eine E-Mail erhalten, wenn neue Antworten und Fragen veröffentlicht werden? Geben Sie bitte Ihre Email-Adresse ein.



Info