675125
129
Zoom out
Zoom in
Vorherige Seite
1/183
Nächste Seite
Projector Network Settings - Network Menu
129
Setting Options Description
EAP Type EAP Type: selects the protocol for
authentication.
PEAP: authentication protocol widely
used in Windows Server.
PEAP-TLS: authentication protocol
used in Windows Server. Select this
when using a client certificate.
EAP-TLS: authentication protocol
widely used to use a client certificate.
EAP-FAST, LEAP: select this when
these authentication protocols are
used.
User name User name: enter up to 63 alphanumeric
characters. You can enter up to 32
alphanumeric characters in the projector
menu. To enter more than 32 characters,
use your Web browser. You can enter a
domain name by adding it before the
user name and separating them with a
backslash (domain\username).
When importing a client certificate, the
name the certificate was issued to is
automatically set.
Password Password: enter a password up to 63
alphanumeric characters for
authentication when using the PEAP,
EAP-FAST, or LEAP type. You can enter
up to 32 alphanumeric characters in the
projector menu. To enter more than 32
characters, use your Web browser. After
you enter the password and select Finish,
the password is displayed as an asterisk
(*).
Client Certificate Client Certificate: imports the client
certificate when using the PEAP-TLS or
EAP-TLS type.
Setting Options Description
Verify Server Cert. Verify Server Cert.: selects whether to
verify the server certificate when a CA
certificate has been set.
CA certificate CA certificate: imports the CA certificate
when using the PEAP, PEAP-TLS, EAP-
TLS, or EAP-FAST type.
RADIUS
Serv.Name
RADIUS Serv.Name: enter the server
name to verify. You can enter up to 32
alphanumeric characters (you cannot use
* : and spaces).
Channel 1ch
6ch
11ch
In Quick connection mode, selects the
frequency band (channel) used by the
wireless LAN.
IP Settings DHCP
IP Address
Subnet Mask
Gateway Address
DHCP: set to On if your network assigns
addresses automatically; set to Off to
manually enter the network's IP
Address, Subnet Mask, and Gateway
Address using 0 to 255 for each address
field.
Do not use these addresses: 0.0.0.0,
127.x.x.x, 192.0.2.x or 224.0.0.0 through
255.255.255.255 (where x is a number
from 0 to 255) for IP Address,
255.255.255.255 or 0.0.0.0 through
254.255.255.255 for Subnet Mask, and
0.0.0.0, 127.x.x.x or 224.0.0.0 through
255.255.255.255 for Gateway Address.
SSID Display On
Off
Select whether to display the SSID on the
network standby screen and Home
screen.
IP Address Display On
Off
Select whether to display the IP address
on the network standby screen and
Home screen.
* Available only for EB1795F/EB1785W/EB1781W.
129

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Forenregeln

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Art des Missbrauchs:

Zum Beispiel antisemitische Inhalte, rassistische Inhalte oder Material, das zu einer Gewalttat führen könnte.

Beispielsweise eine Kreditkartennummer, persönliche Identifikationsnummer oder unveröffentlichte Privatadresse. Beachten Sie, dass E-Mail-Adressen und der vollständige Name nicht als private Informationen angesehen werden.

Forenregeln

Um zu sinnvolle Fragen zu kommen halten Sie sich bitte an folgende Spielregeln:

Neu registrieren

Registrieren auf E - Mails für Epson EB-1781W wenn:


Sie erhalten eine E-Mail, um sich für eine oder beide Optionen anzumelden.


Andere Handbücher von Epson EB-1781W

Epson EB-1781W Bedienungsanleitung - Deutsch - 192 seiten

Epson EB-1781W Bedienungsanleitung - Holländisch - 188 seiten


Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Wenn Sie innerhalb von 15 Minuten keine E-Mail mit dem Handbuch erhalten haben, kann es sein, dass Sie eine falsche E-Mail-Adresse eingegeben haben oder dass Ihr ISP eine maximale Größe eingestellt hat, um E-Mails zu erhalten, die kleiner als die Größe des Handbuchs sind.

Ihre Frage wurde zu diesem Forum hinzugefügt

Möchten Sie eine E-Mail erhalten, wenn neue Antworten und Fragen veröffentlicht werden? Geben Sie bitte Ihre Email-Adresse ein.



Info