216209
55
Zoom out
Zoom in
Vorherige Seite
1/62
Nächste Seite
Problems Concerning Network Functions
Cannot connect using EasyMP Network Projection
Check the message on the screen and then apply the following countermeasures.
Error Messages Remedy
The application version used is not supported. Install the latest
version of the application on your computer.
Install the current version of EasyMP Network Projection from the EPSON Projector Software for Meeting &
Monitoring CD-ROM supplied with the projector.
When a connection is made using EasyMP Network Projection, the projected image remains as is, and a connection cannot be made
from another computer.
Check Remedy
Did the presenter leave the conference room without cutting off
the network connection?
With EasyMP Network Projection, the connection with the computer that was previously connected can be cut
off when another computer tries to connect with the projector, and it connects with the computer that is trying to
connect.
Therefore, when a Projector keyword is not set for the projector, or if you know the Projector keyword, you can
cut off the current connection and, if you perform a connection operation, you can connect to the projector.
When a Projector keyword is set for the projector, if you do not know the Projector keyword, restart the projector
and reconnect.
The projector is not found when EasyMP Network Projection is started.
Check Remedy
Is the Network Configuration screen from the Configuration
menu displayed on the projector?
When the Network Configuration screen is displayed on the projector, network connection for EasyMP Network
Projection is disabled. Close network settings on the projector, and return to the LAN standby screen.
Are the computer's LAN card and the built-in LAN function
available?
Check that LAN is valid by checking Control Panel - System - Hardware in the device manager and so on.
Was the network adapter used selected correctly with EasyMP
Network Projection?
If the computer has multiple LAN environments, it cannot connect unless the network adapter is selected
correctly. When using a computer running Windows, start EasyMP Network Projection, and select the network
adapter you are using from Set options - Switch LAN.s p.36
Troubleshooting
55
55

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Forenregeln

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Art des Missbrauchs:

Zum Beispiel antisemitische Inhalte, rassistische Inhalte oder Material, das zu einer Gewalttat führen könnte.

Beispielsweise eine Kreditkartennummer, persönliche Identifikationsnummer oder unveröffentlichte Privatadresse. Beachten Sie, dass E-Mail-Adressen und der vollständige Name nicht als private Informationen angesehen werden.

Forenregeln

Um zu sinnvolle Fragen zu kommen halten Sie sich bitte an folgende Spielregeln:

Neu registrieren

Registrieren auf E - Mails für Epson eb 1920w wenn:


Sie erhalten eine E-Mail, um sich für eine oder beide Optionen anzumelden.


Andere Handbücher von Epson eb 1920w

Epson eb 1920w Bedienungsanleitung - Holländisch - 164 seiten


Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Wenn Sie innerhalb von 15 Minuten keine E-Mail mit dem Handbuch erhalten haben, kann es sein, dass Sie eine falsche E-Mail-Adresse eingegeben haben oder dass Ihr ISP eine maximale Größe eingestellt hat, um E-Mails zu erhalten, die kleiner als die Größe des Handbuchs sind.

Ihre Frage wurde zu diesem Forum hinzugefügt

Möchten Sie eine E-Mail erhalten, wenn neue Antworten und Fragen veröffentlicht werden? Geben Sie bitte Ihre Email-Adresse ein.



Info