Zoom out
Zoom in
Vorherige Seite
1/153
Nächste Seite
User’s Guide
1

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Forenregeln

Forum

Suche zurücksetzen

  • Wie funktioniert die Zufallswiedergabe bei Verwendung eines Sticks beim Epson EB -W80d? Eingereicht am 9-8-2018 20:48

    Antworten Frage melden
  • Beim Einschalten blinkt die grüne Lampe. Lampe wurde gewechselt und funktionierte. Lampenstundenzäher wurde auf 0 gesetzt. Welchen Grund? Eingereicht am 12-7-2017 09:45

    Antworten Frage melden
  • Lampe gewechselt, grüne Lampe blinkt und Beamer schaltet nicht ein Eingereicht am 12-7-2017 08:50

    Antworten Frage melden

Inhalt der Seiten


  • Page 1

    User’s Guide



  • Page 2

    Notations Used in This Guide
    • Safety indications
    The documentation and the projector use graphical symbols to show how to use the projector safely.
    Please understand and respect these caution symbols in order to avoid injury to persons or property.

    Warning

    This symbol indicates information that, if ignored, could possibly result in personal injury or even death due to incorrect handling.

    Caution

    This symbol indicates information that, if ignored, could possibly result in personal injury or physical damage due to incorrect handling.

    • General information indications

    Attention

    q

    Indicates procedures which may result in damage or injury if sufficient care is not taken.
    Indicates additional information and points which may be useful to know regarding a topic.

    s

    Indicates a page where detailed information regarding a topic can be found.

    g

    Indicates that an explanation of the underlined word or words in front of this symbol appears in the glossary of terms. See the "Glossary"
    section of the "Appendix". s p.131

    Procedure

    Indicates operating methods and the order of operations.
    The procedure indicated should be carried out in the order of the numbered steps.

    [(Name)]

    Indicates the name of the buttons on the Remote Control or the Control panel.
    Example: [Esc] button

    "(Menu Name)"
    Brightness

    Indicates Configuration Menu items.
    Example:
    Select "Brightness" from the Image menu.
    Image menu - Brightness



  • Page 3

    Contents

    3

    Notations Used in This Guide . . . . . . . . . . . . . . . . . . . . . . . . 2

    Switch to the target image by Remote Control . . . . . . . . . . . . . . . . . . . . . . . . . . 22

    Connecting with a USB Cable and Projecting (USB Display) . . . . 23

    Introduction
    Projector Features . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 7
    Convenient Equipment Designed for Ease of Use . . . . . . . . . . . . . . . . . . . . . . . . . 7
    Easy to handle . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 7
    Enhanced security functions . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 7
    Controlling Computer on Projection Surface (EB-460i/450Wi Only) . . . . . . . . . . . . . 8
    Easy Interactive Function . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 8
    Drawing function . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 8
    Selecting Various Input Sources with Multi-Connection . . . . . . . . . . . . . . . . . . . . 8
    Taking full advantage of a network connection . . . . . . . . . . . . . . . . . . . . . . . . 8
    Connecting with a USB cable and projecting (USB Display) . . . . . . . . . . . . . . . . 9
    Projecting a computer screen with the optional Quick Wireless Connection USB
    Key . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 9
    Projecting JPEG images without connecting a computer . . . . . . . . . . . . . . . . . 10
    Enlarge and project your files with the Document Camera . . . . . . . . . . . . . . . . 10

    Part Names and Functions . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 11
    Front/Top . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
    Sides . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
    Interfaces . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
    Base (with Slide Plate) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
    Base (without Slide Plate) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
    Control panel . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
    Remote Control . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
    Easy Interactive Pen(EB-460i/450Wi Only) . . . . . . . . . . . . . . . . . . . . .

    .
    .
    .
    .
    .
    .
    .
    .

    .
    .
    .
    .
    .
    .
    .
    .

    .
    .
    .
    .
    .
    .
    .
    .

    .
    .
    .
    .
    .
    .
    .
    .

    .
    .
    .
    .
    .
    .
    .
    .

    .
    .
    .
    .
    .
    .
    .
    .

    .
    .
    .
    .
    .
    .
    .
    .

    .
    .
    .
    .
    .
    .
    .
    .

    11
    12
    13
    14
    15
    15
    16
    18

    System Requirements . . . . . . . . . . . . . . . . . . . . . . . . .
    Connecting . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
    Connecting for the first time . . . . . . . . . . . . . . . . . . .
    From the second time . . . . . . . . . . . . . . . . . . . . . . .

    .
    .
    .
    .

    .
    .
    .
    .

    .
    .
    .
    .

    .
    .
    .
    .

    .
    .
    .
    .

    .
    .
    .
    .

    .
    .
    .
    .

    .
    .
    .
    .

    .
    .
    .
    .

    .
    .
    .
    .

    .
    .
    .
    .

    .
    .
    .
    .

    .
    .
    .
    .

    .
    .
    .
    .

    .
    .
    .
    .

    .
    .
    .
    .

    .
    .
    .
    .

    23
    24
    24
    27

    Presentations Using Slideshow . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 28
    Files that can be Projected Using Slideshow . . . . . . . . . . . . . . . . . . . . . . .
    Specifications for files that can be projected using Slideshow . . . . . . . . . .
    Slideshow usage examples . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
    Slideshow Basic Operations . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
    Starting and closing Slideshow . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
    Slideshow basic operations . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
    Rotating images . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
    Projecting Image Files . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
    Projecting images . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
    Projecting all image files in a folder in sequence (Slideshow) . . . . . . . . . .
    Image File Display Settings and Slideshow Operation Settings . . . . . . . . . . .

    .
    .
    .
    .
    .
    .
    .
    .
    .
    .
    .

    .
    .
    .
    .
    .
    .
    .
    .
    .
    .
    .

    .
    .
    .
    .
    .
    .
    .
    .
    .
    .
    .

    .
    .
    .
    .
    .
    .
    .
    .
    .
    .
    .

    28
    28
    28
    29
    29
    29
    30
    31
    31
    32
    33

    Connecting External Equipment . . . . . . . . . . . . . . . . . . . . . . . . . . . . 34
    Connecting and Removing USB Devices . . . . . . . . . . . . . . . . . . . . . .
    Connecting USB devices . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
    Removing USB devices . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
    Connecting an External Monitor . . . . . . . . . . . . . . . . . . . . . . . . . . .
    Connecting External Speakers . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
    Connecting a microphone . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

    .
    .
    .
    .
    .
    .

    .
    .
    .
    .
    .
    .

    .
    .
    .
    .
    .
    .

    .
    .
    .
    .
    .
    .

    .
    .
    .
    .
    .
    .

    .
    .
    .
    .
    .
    .

    .
    .
    .
    .
    .
    .

    .
    .
    .
    .
    .
    .

    34
    34
    34
    35
    36
    36

    Connecting a LAN Cable . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 37
    Installing the Wireless LAN Unit . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 38

    Various Ways to Use the Projector
    Changing the Installation Mode . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 20
    Changing the Projected Image . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 21
    Automatically Detect Input Signal and Change the Projected Image (Source Search)
    . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 21

    Functions for Enhancing Projection . . . . . . . . . . . . . . . . . . . . . . . . . 39
    Selecting the Projection Quality (Selecting Color Mode) . . . . . . . . . . . . . . .
    Setting the Auto Iris . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
    Hiding the Image and Sound Temporarily (A/V Mute) . . . . . . . . . . . . . . . . .
    Freezing the Image (Freeze) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
    Changing the Aspect Ratio . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

    .
    .
    .
    .
    .

    .
    .
    .
    .
    .

    .
    .
    .
    .
    .

    .
    .
    .
    .
    .

    39
    40
    40
    41
    41



  • Page 4

    Contents

    4

    Changing methods . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
    Changing the aspect ratio for video equipment images . . . . . . . . . . . . . .
    Changing the aspect ratio for computer images (EB-460i/460) . . . . . . . . .
    Changing the aspect ratio for computer images (EB-450Wi/450W/440W) . .
    Using the Pointer to Highlight Sections (Pointer) . . . . . . . . . . . . . . . . . . . .
    Enlarging Part of the Image (E-Zoom) . . . . . . . . . . . . . . . . . . . . . . . . . . . .
    Operating the Mouse Pointer by Remote Control (Wireless Mouse) . . . . . . . .

    .
    .
    .
    .
    .
    .
    .

    .
    .
    .
    .
    .
    .
    .

    .
    .
    .
    .
    .
    .
    .

    .
    .
    .
    .
    .
    .
    .

    41
    42
    43
    44
    46
    47
    48

    Security Functions . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 50
    Managing Users (Password Protect) . . . . . . . . . . . . . . . . . . . . . . . . .
    Type of Password Protect . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
    Setting Password Protect . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
    Entering the Password . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
    Restricting Operation (Control Panel Lock) . . . . . . . . . . . . . . . . . . . .
    Anti-Theft Lock . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
    Installing the wire lock . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

    .
    .
    .
    .
    .
    .
    .

    .
    .
    .
    .
    .
    .
    .

    .
    .
    .
    .
    .
    .
    .

    .
    .
    .
    .
    .
    .
    .

    .
    .
    .
    .
    .
    .
    .

    .
    .
    .
    .
    .
    .
    .

    .
    .
    .
    .
    .
    .
    .

    .
    .
    .
    .
    .
    .
    .

    50
    50
    50
    51
    52
    53
    53

    Easy Interactive Function (EB-460i/450Wi only) . . . . . . . . . . . . . . 54
    Summary of Easy Interactive Function . . . . . . . . . . . . . . . . . . . . . . . . . .
    Operation Steps . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
    Using Easy Interactive Function for the first time . . . . . . . . . . . . . . . . .
    From the second time . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
    System Requirements . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
    Using Easy Interactive Function for the First Time . . . . . . . . . . . . . . . . . . .
    Using Easy Interactive Function from the Second Time . . . . . . . . . . . . . . .
    Calibration . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
    Cases in which calibration is required . . . . . . . . . . . . . . . . . . . . . . . . .
    Replacing the Batteries for the Easy Interactive Pen . . . . . . . . . . . . . . . . .

    .
    .
    .
    .
    .
    .
    .
    .
    .
    .

    .
    .
    .
    .
    .
    .
    .
    .
    .
    .

    .
    .
    .
    .
    .
    .
    .
    .
    .
    .

    .
    .
    .
    .
    .
    .
    .
    .
    .
    .

    .
    .
    .
    .
    .
    .
    .
    .
    .
    .

    54
    55
    55
    55
    55
    56
    59
    61
    61
    61

    Changing Settings Using a Web Browser (Web Control) . . . . . . . 63
    Displaying Web Control . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 63
    Entering the IP address of the projector . . . . . . . . . . . . . . . . . . . . . . . . . . . . 63
    Displaying Web Remote . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 64

    Using the Mail Notification Function to Report Problems . . . . . . 66
    Management Using SNMP . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 67
    Saving a User's Logo . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 68
    Saving User Pattern . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 70

    Configuration Menu
    Using the Configuration Menu . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 73
    List of Functions . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 74
    Image Menu . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
    Signal Menu . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
    Settings Menu . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
    Extended Menu . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
    Network Menu . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
    Notes on using the Network menu . . . . . . . . . . . . . . . . . . . . . . . . . . . .
    Soft keyboard operations . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
    Basic Menu . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
    Wireless LAN Menu . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
    Security menu . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
    When WEP is selected . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
    When WPA-PSK (TKIP) or WPA2-PSK (AES) is selected . . . . . . . . . . . . . . .
    Wired LAN menu . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
    Mail menu . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
    Others Menu . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
    Reset Menu . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
    Info Menu (Display Only) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
    Reset Menu . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

    .
    .
    .
    .
    .
    .
    .
    .
    .
    .
    .
    .
    .
    .
    .
    .
    .
    .

    .
    .
    .
    .
    .
    .
    .
    .
    .
    .
    .
    .
    .
    .
    .
    .
    .
    .

    .
    .
    .
    .
    .
    .
    .
    .
    .
    .
    .
    .
    .
    .
    .
    .
    .
    .

    .
    .
    .
    .
    .
    .
    .
    .
    .
    .
    .
    .
    .
    .
    .
    .
    .
    .

    74
    75
    76
    78
    80
    81
    81
    82
    83
    84
    85
    85
    86
    87
    88
    89
    90
    91



  • Page 5

    Contents

    5

    Screen Size and Projection Distance . . . . . . . . . . . . . . . . . . . . . . . . 117

    Troubleshooting
    Using the Help . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 93

    Projection Distance (EB-460i/460) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 117
    Projection Distance (EB-450Wi/450W/440W) . . . . . . . . . . . . . . . . . . . . . . . . . . 117

    Problem Solving . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 94

    List of Supported Resolutions . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 119

    Reading the Indicators . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
    t indicator is lit or flashing red . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
    m o indicator is flashing or lit orange . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
    When the Indicators Provide No Help . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
    Problems relating to images . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
    Problems when projection starts . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
    Problems relating to monitoring and control . . . . . . . . . . . . . . . . . . . . . . . .
    Problems relating to Easy Interactive Function . . . . . . . . . . . . . . . . . . . . . . .
    Other problems . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

    . 94
    . 95
    . 96
    . 97
    . 98
    102
    102
    103
    104

    Reading Error Notification Mail . . . . . . . . . . . . . . . . . . . . . . . . . . . . 106

    Appendix
    Cleaning Parts . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 108
    Cleaning the Projector's Surface . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 108
    Cleaning the Projection Window . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 108
    Cleaning the Air Filter . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 108

    Replacing Consumables . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 110
    Replacing the Remote Control Batteries . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
    Replacing the Lamp . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
    Lamp replacement period . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
    How to replace the Lamp . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
    Resetting the Lamp Hours . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
    Replacing the Air Filter . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
    Air filter replacement period . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
    How to replace the air filter . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

    110
    111
    111
    111
    114
    114
    114
    114

    Optional Accessories and Consumables . . . . . . . . . . . . . . . . . . . . 116
    Optional accessories . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 116
    Consumables . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 116

    Supported Monitor Displays (EB-460i/460) . . . . . . . . . . . . . . . . . . . . . . . . . . . .
    Computer signals (analog RGB) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
    Component Video . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
    Composite Video/S-Video . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
    Supported Monitor Displays (EB-450Wi/450W/440W) . . . . . . . . . . . . . . . . . . . .
    Computer signals (analog RGB) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
    Component Video . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
    Composite Video/S-Video . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

    119
    119
    119
    119
    119
    119
    120
    120

    ESC/VP21 Commands . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 121
    Command List . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
    Cable Layouts . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
    Serial Connection . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
    Communications protocol . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

    121
    122
    122
    122

    About PJLink . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 123
    Specifications . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 124
    Projector General Specifications . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 124

    Appearance . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 129
    Glossary . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 131
    General Notes . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 133
    Wireless Telegraphy Act Regulations . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 133
    About Notations . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 133
    General Notice . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 133

    Index . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 151



  • Page 6

    Introduction
    This chapter explains the projector's features and the part names.



  • Page 7

    Projector Features
    Convenient Equipment Designed for Ease of Use
    Easy to handle
    • Easy wall mounting
    The projector is supplied with a dedicated slide plate that makes
    troublesome wall mounting easy.
    The slide plate is integrated into the projector main unit, so mounting is
    easy and installation time has been reduced compared to previous models.
    s Installation Guide
    You can also perform maintenance such as replacing the air filter and
    lamp simply while projector is mounted to a wall.
    • No special screen required
    Installation in a wide range of places is possible because you can project
    images onto a projection surface such as a wall if there is no projector
    screen.
    • Short distance projection
    At 47 cm, the recommended shortest projection distance allows you to
    place the projector close to the screen. s p.117
    If you mount the projector to a wall and project images from diagonally
    above, you can give your presentation without the shadow of anybody
    who stands up near the projection surface appearing in the images.
    Furthermore, when your back is facing the screen, the projector light does
    not dazzle you because it does not interfere with your field of view.
    • Direct power on/off
    In places where power is managed centrally, such as in a conference
    room, you can set the projector to turn on or off when the main power
    source to which the projector is connected is switched on or off.
    • Display of projection lines on the projection surface
    The pattern function for projecting ruled lines or a grid enables effective
    use of the projection surface in lessons and presentations.

    7

    • Speaker
    The incorporation of a high-output 10 W speaker enables your voice to
    reach the edges of the room even in spacious classrooms.
    • Projection screen for WXGA (EB-450Wi/450W/440W only)
    With a computer that has a 16:10 WXGA wide LCD display, the image
    can be projected in the same aspect. This allows you to effectively use the
    width of whiteboards and other landscape-oriented projection surfaces.
    • Control the projector from a computer
    You can use the Web Control function and Web Remote function to
    perform the same operations on a computer as with the projector's
    control panel or remote control. s p.63

    Enhanced security functions
    • Password Protect to restrict and manage users
    By setting a Password you can restrict who can use the projector.
    s p.50
    • Control Panel Lock restricts button operation on the Control panel
    You can use this to prevent people changing projector settings without
    permission at events, in schools, and so on. s p.52
    • Equipped with anti-theft security devices
    The projector is equipped with the following types of anti-theft security
    functions. s p.53
    • Security slot
    • Security cable installation point



  • Page 8

    Projector Features

    Controlling Computer on Projection Surface
    (EB-460i/450Wi Only)
    Easy Interactive Function
    By simply connecting a computer to the projector, you can control the
    computer on the projection screen and give an effective, interactive
    presentation or lesson. s p.54

    Drawing function
    You can use a graphics application to import text and diagrams have been
    hand-drawn on the projection surface with an electronic pen (Easy
    Interactive Pen). This combines the functions of a whiteboard and screen
    without the need for either. s p.54

    8

    Selecting Various Input Sources with MultiConnection
    As well as connecting a computer cable, you can select various interfaces
    such as a USB cable, USB memory, or LAN connection. This allows you to
    select from a range of input sources to match your usage environment.

    Taking full advantage of a network connection
    You can make effective use of your network by using the supplied "EPSON
    Projector Software for Meeting & Monitoring" to perform efficient and
    varied presentations and meetings. s EasyMP Network Projection
    Operation Guide
    • Connect a Computer to the projector via a network
    You can project by connecting to an already constructed network system.
    You can hold efficient meetings by projecting from multiple computers
    connected to a network system without having to change any cables.
    • Connecting wirelessly to a computer
    When you install the optional wireless LAN unit in the projector, you can
    connect wirelessly to a computer. s p.38



  • Page 9

    Projector Features

    • Connection method for various networks
    The following methods are available for connecting the projector to a
    network. Select whichever method suites your environment. s EasyMP
    Network Projection Operation Guide
    • Advanced Connection Mode
    Advanced Connection Mode is an infrastructure connection, offering you a
    method of connecting to an already constructed network.

    9

    With the Quick Wireless Connection USB Key, you can connect to a
    projector on a network even if EasyMP Network Projection is not installed.
    For example, you can connect under the following environments.
    • Connect in Quick Connection Mode using the optional Wireless LAN
    unit.

    • Quick Connection Mode
    Quick Connection Mode is a connection method that can only be executed
    when the optional wireless LAN unit is installed.
    Quick Connection Mode temporarily allocates the projector's SSID to the
    computer and makes an ad-hoc connection, and then restores the comput‐
    er's network settings after disconnecting.

    Connecting with a USB cable and projecting (USB Display)

    • Connect to the network via an access point.

    By simply connecting the supplied USB cable to a computer, you can
    project images from the computer's screen.
    s Quick Start Guide , p.23

    • Connect to the network via a wired LAN connection.

    Projecting a computer screen with the optional Quick Wireless
    Connection USB Key
    Using the optional Quick Wireless Connection USB Key, you can quickly
    connect a computer to the projector for projection.



  • Page 10

    Projector Features

    s p.116

    q

    • This projector is not compatible with the Network Projector
    function which is a standard feature in Windows Vista and
    Windows 7.
    • Limitations when projecting from Windows Media Center
    When Windows Media Center is in full-screen mode, images cannot
    be projected. Switch to the window display mode to project the
    images.

    Projecting JPEG images without connecting a computer
    You can project a slideshow of JPEG images saved on a USB device such as
    a USB compatible digital camera, hard disk, or USB memory by simply
    connecting to the projector. s p.28

    Enlarge and project your files with the Document Camera
    A USB compatible Document Camera is available as an optional extra.
    With this Document Camera there is no need for a power cable. You can
    connect easily with one USB cable, and its clean design really simplifies
    projecting and enlarging your documents. s p.34

    10



  • Page 11

    Part Names and Functions

    11

    Name

    Front/Top

    Name

    Function

    A Remote Receiver

    Receives signals from the remote control.
    s Quick Start Guide

    B Lamp cover

    Open this cover when replacing the projector's Lamp.
    s p.111

    C Lamp Cover Fixing
    Screw

    Screw to fix the Lamp cover in place. s p.111

    D Air exhaust vent

    Exhaust vent for air used to cool the projector internally.

    Caution
    Do not place anything that can become warped or
    damaged by heat near the air exhaust vents, or
    bring your hands or face close to the vents while pro‐
    jection is in progress.

    Function

    E Cable cover fixing
    screws

    Screws to fix the cable cover in place.
    s Quick Start Guide

    F Cable cover

    When connecting to an input port, loosen the two screws
    and open this cover.
    s Quick Start Guide

    G Control panel

    Allows you to operate and check the status of the
    projector. s p.15

    H Speaker

    Outputs audio for images currently being projected or
    audio from the Microphone (Mic) input port.



  • Page 12

    Part Names and Functions

    12

    Name

    Sides

    Function

    C Easy Interactive
    Function receiver
    (EB-460i/450Wi only)

    Receives signals from the Easy Interactive Pen.
    s p.54

    D Projection window

    Projects images.

    Warning
    • Do not look at this during projection.
    • Do not place objects on or hand nears this. Doing
    so is dangerous because the focus of projection
    light results in high temperatures.

    Name

    E Wireless LAN unit
    insertion slot

    Insert the optional wireless LAN unit. s p.38

    F Focus lever

    Adjusts the image focus.
    Opens the air filter cover and operates the focus lever.
    s Quick Start Guide

    G Air filter cover

    Open this cover when replacing the air filter or installing
    the optional Wireless LAN unit.

    H Air intake vent
    (Air filter)

    Takes in air to cool the projector internally. If dust collects
    here it can cause the internal temperature to rise, and this
    can lead to problems with operation and shorten the
    optical engine's service life. Be sure to clean the Air filter
    regularly. s p.108, p.114

    I Air filter cover
    open/close lever

    Opens and closes the air filter cover. s p.114
    Open this cover when installing the optional Wireless
    LAN unit. s p.38

    J Security slot

    The Security slot is compatible with the Microsaver
    Security System manufactured by Kensington.
    s p.53

    Function

    A Security cable
    installation point

    Pass a commercially available wire lock through here and
    lock it in place. s p.53

    B Remote Receiver

    Receives signals from the remote control.
    s Quick Start Guide



  • Page 13

    Part Names and Functions

    13

    Name

    Interfaces

    C RS-232C port

    When controlling the projector from a computer, connect
    it to the computer with an RS-232C cable. This port is for
    control use and should not normally be used. s p.122

    D Monitor Output
    (Monitor Out) port

    Outputs the image signals from the computer connected
    to the Computer1 input port to an external monitor. This
    is not available for component video signals or other
    signals being input to any port other than the Computer1
    input port. s p.35

    E USB(TypeB) port

    Connects the projector to a computer via the supplied USB
    cable to project images from the computer.
    s p.23
    Also use this port to connect to a computer via the
    supplied USB cable to use the wireless mouse function.
    s p.48
    Also use this port to connect to a computer via the
    supplied USB cable to use the Easy Interactive Function.
    (EB-460i/450Wi only) s p.54

    F USB(TypeA) port

    Projects a JPEG image Slideshow when memories or
    digital cameras are connected to the USB compatible port.
    s p.28
    Also connects to the optional Document Camera.

    G USB indicator

    Notifies you of the status of the USB device connected to
    the USB(TypeA) port as described below.
    OFF: USB device is not connected
    Orange Light ON: USB device is connected
    Green Light ON: USB device is operating
    Red Light ON: Error

    Remove the cable cover to view the following ports.
    Remove the cable cover to connect equipment.
    s Quick Start Guide

    Name

    A S-Video input port
    Video input port

    Audio-L/R input port

    B Power inlet

    Function
    For S-video signals from video sources.
    For composite video signals from video sources.
    Connects to the audio output port to output audio from
    equipment connected to the S-Video input port or the
    Video input port.
    s Quick Start Guide
    Connects to the power cable.
    s Quick Start Guide

    Function



  • Page 14

    Part Names and Functions

    Name

    H Computer2 input port

    14

    Function
    Inputs image signals from a computer and component
    video signals from other video sources.

    Base (with Slide Plate)
    A slide plate is attached to the projector main unit at the time of shipment.

    Audio2 port
    Connects to the audio output port of equipment
    connected to the Computer2 input port to input audio.
    Also, when the input source is one of the following and you
    want to output audio from the projector, connect the
    audio source to theAudio2 port.
    - USB: When playing back a slideshow from a USB storage
    device connected to the USB(TypeA) port, or when
    projecting from the optional Document Camera
    - USB Display
    - LAN
    s Quick Start Guide

    I LAN port

    Connects to a LAN cable and then to a network.
    s p.37

    J Computer1 input port

    Inputs image signals from a computer and component
    video signals from other video sources.

    Audio1 port
    Connects to the audio output port of equipment
    connected to the Computer1 input port to input audio.
    s Quick Start Guide

    K Microphone (Mic)
    input port

    Connects to a microphone. s p.36

    L Audio Output (Audio
    Out) port

    Outputs the audio of the images currently being projected
    or the audio input from the Microphone (Mic) input port
    to an external speaker. s p.36

    Name

    Function

    A Slide plate

    Connect this to the setting plate when mounting the
    projector on a wall. s Installation Guide

    B Security cable
    installation point

    Pass a commercially available wire lock through here and
    lock it in place. s p.53



  • Page 15

    Part Names and Functions

    15

    Base (without Slide Plate)

    Control panel

    Name

    Name

    A Ceiling mount fixing
    points
    (four points)

    B Security cable
    installation point

    Function
    Connect the ceiling mount fixing points to a commercially
    available ceiling mount or wall mount when mounting the
    projector to a ceiling or wall. For details, see the
    documentation supplied with the the ceiling mount or
    wall mount.
    Pass a commercially available wire lock through here and
    lock it in place. s p.53

    Function

    A [t] button

    Turns the projector power on or off.
    s Quick Start Guide

    B Status indicators

    The color of the indicators and whether they are flashing
    or lit indicate the status of the projector. s p.94

    C [Source Search]
    button

    Changes to the next input source that is connected to the
    projector and is sending an image. s p.21

    D [Enter] button

    If pressed during projection of a computer image signal, it
    automatically adjusts the Tracking-Sync., and Position to
    project the optimum image.
    When the Configuration Menu or Help screen is
    displayed, pressing this button confirms the current item
    and moves to the next level. s p.73



  • Page 16

    Part Names and Functions

    Name

    16

    Function

    E [w][v] buttons

    Corrects Keystone distortion. In the following cases,
    however, these buttons function as the [
    ] and [
    ]
    buttons.
    – When the projected image is being sent through a
    Network connection
    – When the Slideshow function is being used for
    projection
    If pressed when a Configuration Menu or Help screen is
    displayed, these buttons selects menu items and setting
    values.
    s Quick Start Guide , p.73

    F [Help] button

    Displays and closes the Help screen which shows you how
    to deal with problems if they occur. s p.93

    G [Esc] button

    Stops the current function.
    When the Configuration Menu is displayed, pressing this
    button moves to the previous menu level. s p.73

    H [Wide][Tele] button

    Adjusts Tele/Wide. Press the [Tele] button to reduce the
    size of the projection screen and press the [Wide] button
    to increase the size of the projection screen.
    When the Configuration Menu or Help screen is
    displayed, these buttons function as the [ ][ ] buttons,
    which select menu items and setting values.
    s Quick Start Guide

    I [Menu] button

    Displays and closes the Configuration Menu.
    s p.73

    Remote Control



  • Page 17

    Part Names and Functions

    Name

    17

    Function

    A [t] button

    Turns the projector power on or off.
    s Quick Start Guide

    B [Computer] button

    Each time you press the button, input changes between
    images from the Computer1 input port and the
    Computer2 input port. s p.22

    C [Video] button

    Each time you press the button, input changes between
    images from the Video input port and the S-Video input
    port. s p.22

    D Numeric buttons

    Use when entering a password. s p.50

    E [A/V Mute] button

    Turns the video and audio on or off. s p.40

    F [Freeze] button

    Images are paused or unpaused. s p.41

    G [Auto] button

    If pressed during projection of a computer image signal, it
    automatically adjusts the Tracking-Sync., and Position to
    project the optimum image.

    Name

    Function

    M [Enter] button

    When the Configuration Menu or Help screen is
    displayed, pressing this button confirms the current item
    and moves to the next level. s p.73, p.93
    Acts as a mouse's left button when using the Wireless
    Mouse function. s p.48

    N [Esc] button

    Stops the current function. If pressed when the
    Configuration Menu is displayed, it moves to the previous
    level. s p.73, p.93
    Acts as a mouse's right button when using the Wireless
    Mouse function. s p.48

    O [Volume] buttons (a)
    (b)

    (a) Decreases the Volume.
    (b) Increases the Volume.
    s Quick Start Guide

    Caution

    H [Aspect] button

    The Aspect Ratio changes each time the button is pressed.
    s p.41

    I [Page] buttons
    ([Up]) ([Down])

    When you are using the Wireless Mouse function, USB
    Display function, or the input source is projecting a file of
    application software that supports page up/down via the
    LAN, you can move the page up and down by pressing
    these buttons. s p.48

    P [Pointer] button

    J [E-Zoom] buttons
    (z)(x)

    Enlarges or reduces the image without changing the
    projection size. s p.47

    Press this button to activate the on-screen pointer.
    s p.46

    Q [Help] button

    K [Menu] button

    Displays and closes the Configuration Menu. s p.73

    Displays and closes the Help screen which shows you how
    to deal with problems if they occur. s p.93

    R [Color Mode] button

    Each time the button is pressed, the Color Mode changes.
    s p.39

    S [Num] button

    Use when entering a Password. s p.50

    L [
    [

    ][
    ][

    ] buttons

    ]

    When the Configuration Menu or Help screen is
    displayed, pressing these buttons selects menu items and
    setting values. s p.73, p.93
    During Wireless Mouse function, the mouse pointer
    moves in the direction the button is pushed. s p.48

    Do not start when the volume is set too high.
    A sudden excessive volume may cause loss of hear‐
    ing. Always lower the volume before turning the
    power off, and gradually increase the volume after
    turning the power on.



  • Page 18

    Part Names and Functions

    Name

    18

    Function

    T [User] button

    Select any frequently used item from the five available
    Configuration Menu items, and assign it to this button. By
    pressing the button the assigned menu item selection/
    adjustment screen is displayed, allowing you to make onetouch settings/adjustments. s p.76
    The menu Power Consumption is assigned as the default
    setting.

    U [USB] button

    Each time you press the button, input changes between
    images from the equipment connected to USB Display
    and USB(TypeA) port. s p.22

    V [LAN] button

    Changes to the images projected with EasyMP Network
    Projection. When you are projecting via Quick Wireless
    Connection using the optional Quick Wireless
    Connection USB Key, pressing this button changes to that
    image. s p.22

    W [Search] button

    Changes to the next input source that is connected to the
    projector and is sending an image. s p.21

    X Remote control lightemitting area

    Outputs remote control signals.

    Easy Interactive Pen(EB-460i/450Wi Only)

    Name

    Function

    A Pen tip switch

    Functions as the left button of a mouse.

    B Battery indicator

    When you press the button, this indicator lights green if
    there is any remaining battery power.
    It does not light if there is not much remaining battery
    power. If this happens, replace the batteries. s p.61

    C Button

    Functions as the right button of a mouse.

    D Strap attachment hole

    You can attach a commercially available strap.

    E Battery cover

    Open this cover when replacing the batteries. s p.61



  • Page 19

    Various Ways to Use the Projector
    This chapter explains useful functions for giving presentations, connecting external equipment, and security functions.



  • Page 20

    Changing the Installation Mode
    The projector supports the following two different projection methods.
    Install according to the conditions of the installation location.
    • Suspend the projector from the
    ceiling and project images from
    in front of the screen. (Front/
    Ceiling projection)

    • Suspend the projector from the
    ceiling and project images from
    behind a translucent screen.
    (Rear/Ceiling projection)

    At the time of shipment, the projector is set to be installed suspended from
    a ceiling and to project images from the front of the screen
    (Front/Ceiling).

    q

    Set either Front/Ceiling or Rear/Ceiling setting from the
    Configuration Menu. s p.78

    20



  • Page 21

    Changing the Projected Image
    You can change the projected image in the following two ways.
    • Changing by Source Search
    The projector automatically detects signals being input from connected
    equipment, and the image being input from the equipment is projected.
    • Changes to the target image.
    You can use the Remote Control buttons to change to the target input
    port.

    Automatically Detect Input Signal and Change the
    Projected Image (Source Search)
    You can project the target image quickly as input ports with no image
    signal being input are ignored when you change by pressing the [Source
    Search] button.

    21

    F USB*: When the image is from a device connected to the USB(TypeA)
    port.
    G LAN: When the projector is connected to a computer via a network,
    and images from EasyMP Network Projection are projected.
    Skipped when no image signal is being input.

    *USB input source indicates that a Slideshow is being played back from a
    USB storage device connected to the USB(TypeA) port, or that images are
    being projected from the optional Document Camera.

    Procedure
    When your video equipment is connected, start playback before
    beginning this operation.
    Using the Remote Control

    Using the Control panel

    When two or more pieces of equipment are connected, press the [Source
    Search] button until the target image is projected.

    A
    B
    C
    D
    E

    Computer1
    Computer2
    S-Video
    Video
    USB Display



  • Page 22

    Changing the Projected Image

    q

    The following screen showing the status of image signals is displayed
    when only the image that the projector is currently displaying is
    available, or when no image signal can be found. You can select the
    input port where the equipment you want to use is connected. If no
    operation is performed after about 10 seconds, the screen closes.

    Switch to the target image by Remote Control
    You can change directly to the target image by pressing the following
    buttons on the Remote Control.
    Remote Control

    A Each time you press the button, input changes between images from the
    Computer1 input port and the Computer2 input port.
    B Each time you press the button, input changes between images from the
    Video input port and the S-Video input port.

    22

    C Each time you press the button, input changes between images from the
    equipment connected to USB Display and USB(TypeA) port.
    D Changes to the images projected with EasyMP Network Projection. When
    you are projecting via Quick Wireless Connection using the optional Quick
    Wireless Connection USB Key, this button changes to that image.



  • Page 23

    Connecting with a USB Cable and Projecting (USB Display)
    You can use the supplied USB cable to connect the projector to a computer
    to project images from the computer. This function is called USB Display.
    Simply by connecting via a USB cable, images from the computer can be
    displayed.

    Display

    23

    Resolution of no lower than 640x480 and no higher than
    1600x1200.
    Display color of 16-bit color or greater

    Only 32-bit versions are supported.

    To activate the USB Display function, set USB Type B to USB Display from
    the Extended menu in the Configuration Menu.

    For Mac OS

    The following shows the default settings for USB Type B.

    OS

    • EB-460i/450Wi: Off
    • EB-460/450W/440W: USB Display

    Mac OS X 10.5.1 or later
    Mac OS X 10.6.x

    CPU

    Power PC G4 1GHz or faster
    Recommended: Intel Core Duo 1.83GHz or faster

    Amount of
    Memory

    512MB or more

    Hard Disk
    Free space

    20MB or more

    Display

    Resolution of no lower than 640x480 and no higher than
    1680x1200.
    Display color of 16-bit color or greater

    For EB-460i/450Wi, the setting needs to be changed in advance.
    s p.78

    System Requirements
    For Windows

    OS

    Windows
    Windows
    Windows
    Windows
    Windows
    Windows

    2000 Service Pack 4
    XP
    XP Service Pack 2 or later
    Vista
    Vista Service Pack 1 or later
    7

    CPU

    Mobile Pentium III 1.2GHz or faster
    Recommended: Pentium M 1.6GHz or faster

    Amount of
    Memory

    256MB or more
    Recommended: 512MB or more

    Hard Disk
    Free Space

    20MB or more



  • Page 24

    Connecting with a USB Cable and Projecting (USB Display)

    Connecting

    24

    D Connect to the USB cable.

    When outputting audio from the projector's speaker, connect
    an audio cable (commercially available) to the Audio2 port.
    s "Connecting for the first time" p.24
    s "From the second time" p.27

    Attention
    Connect the projector directly to the computer and not via a USB hub.

    Connecting for the first time
    The first time you connect, the driver needs to be installed. The procedure
    is different for Windows and Mac OS.

    Procedure
    For Windows

    A Driver installation starts automatically.
    When you are using Windows 2000, double-click My Computer EPSON_PJ_UD - EMP_UDSE.exe on your computer.

    Procedure

    A Turn the computer on.
    B Connect to the power cable (supplied).
    C Turn the projector on.



  • Page 25

    Connecting with a USB Cable and Projecting (USB Display)

    25

    C Computer images are projected.
    It may take a while before computer images are projected. Until
    computer images are projected, leave the equipment as it is and do
    not disconnect the USB cable or turn off the power to the projector.

    When using a computer running Windows 2000 under user
    authority, a Windows error message is displayed during installation
    and you may not be able to install the software. In this case, try
    updating Windows to the latest version, restart, and then try to
    connect again.
    For more details, contact the nearest address provided in the Support
    and Service Guide. s Epson Projector Contact List

    B When the License Agreement screen is displayed, click

    "Agree".
    If the driver is not installed, you cannot start USB Display. Select
    Agree to install the driver. If you want to cancel installation, click
    Disagree.



  • Page 26

    Connecting with a USB Cable and Projecting (USB Display)

    q

    • If it is not installed automatically, double-click My Computer EPSON_PJ_UD - EMP_UDSE.EXE, on your computer.
    • If nothing is projected for some reason, click All Programs EPSON Projector - EPSON USB Display - EPSON USB Display
    Vx.x on your computer.
    • If the mouse pointer flickers on the computer screen, click All
    Programs - EPSON Projector - EPSON USB Display - EPSONUSB
    DisplayVx.x on your computer, and then clear the Transfer layered
    window checkbox.
    • To uninstall the driver, open Control Panel - Add/Remove
    Programs - and uninstall EPSON USB Display Vx.x.
    • Disconnecting
    The projector can be disconnected simply by disconnecting the USB
    cable. There is no need to use the Safely Remove Hardware feature
    in Windows.

    26

    E Computer images are projected.
    It may take a while for computer images to be projected. Until the
    computer images are projected, leave the equipment as is and do not
    disconnect the USB cable or turn off the power of the projector.

    When connecting next time, see s "From the second time" p.27.
    For Mac OS

    A The setup folder of USB Display is displayed in the Finder.
    B Double-click the UD_Installer icon.
    Enter the administrator authority password and start the installation.

    C Follow the on-screen instructions to install.
    D When the License Agreement screen is displayed, click

    "Agree".
    If you do not select Agree, USB Display cannot be started. If you
    want to cancel projection, click Disagree.
    When the installation is complete, the USB Display icon is displayed
    in the Dock and menu bar.

    q

    • If the USB Display setup folder is not displayed automatically in the
    Finder, double-click EPSON PJ_UD - UD_Installer on your
    computer.
    • If nothing is projected for some reason, click the USB Display icon
    in the Dock.
    • If there is no USB Display icon in the Dock, start USB Display
    V.x.x from the Applications folder.
    • To uninstall the driver, start Remove USB Display V.x.x in the Tool
    folder of the Applications folder.



  • Page 27

    Connecting with a USB Cable and Projecting (USB Display)

    Attention
    • To disconnect USB Display, click the menu bar icon or Dock icon, select
    Disconnect from the menu that is displayed, and then remove the USB cable.

    • If you select Exit from the Dock icon menu, USB Display does not start
    automatically when you connect the USB cable.

    From the second time
    Computer images are projected.
    It may take a while before computer images are projected. Please wait.

    q

    For Windows

    • Applications that use part of DirectX functions may not be displayed
    correctly.
    • Disconnecting
    The projector can be disconnected simply by disconnecting the USB
    cable. There is no need to use the Safely Remove Hardware feature.
    • Limitations when projecting from Windows Media Center
    When Windows Media Center is in full-screen mode, images cannot
    be projected. Switch to the window display mode to project the
    images.
    For Mac OS

    If images are not projected, start USB Display V.x.x from the
    Applications folder.

    27



  • Page 28

    Presentations Using Slideshow
    Files that can be Projected Using Slideshow
    You can use Slideshow to directly project files stored in a USB storage
    device or digital camera connected to the projector.

    q

    28

    Slideshow usage examples
    Projecting images stored on USB storage and other media

    You may not be able to use USB storage devices that incorporate
    security functions.

    Specifications for files that can be projected using Slideshow
    Type

    File Type (Ex‐
    tension)

    Still image .jpg

    q

    Notes
    The following cannot be projected.
    - CMYK color mode format
    - Progressive format
    - Images with a resolution greater than 4608x3072
    - Files with the extension ".jpeg"
    Due to the characteristics of JPEG files, images may
    not be projected clearly if the compression ratio is too
    high.

    • When using a USB hard disk, we recommend using an AC adapter
    power supply.
    • The projector does not support some file systems, so use media that
    has been formatted in Windows.
    • Format the media in FAT16/32.

    Example 1: Prepare multiple images and project them continuously
    (Slideshow)s p.32
    Example 2: Select and project image files one at a time s p.31



  • Page 29

    Presentations Using Slideshow

    Slideshow Basic Operations
    Slideshow lets you play back and project image files stored on USB storage
    devices and digital cameras.
    This section explains the basic operations for Slideshow.
    Although the following steps are explained based on the remote control,
    you can perform the same operations from the projector's control panel.

    29

    q

    • You can also insert a memory card into a USB card reader and then
    connect the reader to the projector. However, some commercially
    available card readers may not be compatible with the projector.
    • When the following screen (Select drive screen) is displayed, use the
    [ ][ ] buttons to select the drive you want to use, and then press
    the [Enter] button.

    Starting and closing Slideshow
    Starting Slideshow

    Procedure

    A Change the projected image to USB.
    s p.21

    B Connect the USB storage device or digital camera to the
    projector.
    s p.34

    Slideshow starts and the file list screen is displayed.

    • To display the Select drive screen, position the cursor on Select
    drive at the top of the file list screen, and then press the [Enter]
    button.

    Slideshow basic operations
    The following describes the procedures for playing and projecting images
    using Slideshow.

    Closing Slideshow

    Procedure
    Procedure
    To close Slideshow, disconnect the USB device from the USB(TypeA)
    port on the projector. For a digital camera, hard disk, or other
    equipment, turn off the power of the equipment and then
    disconnect the equipment.

    A Use the [

    ][
    ][ ][
    on the target file or folder.

    ] buttons to position the cursor



  • Page 30

    Presentations Using Slideshow

    30

    When a folder is selected, the files in the selected folder are displayed.
    Select Back to Top on the screen that opened and press the [Enter]
    button to return to the previous screen.

    Rotating images
    You can rotate the played images in JPEG format in 90˚ increments. You
    can also rotate JPEG format images during Slideshow.
    Rotate JPEG images in the following way.

    Procedure
    A

    Cursor

    • JPEG files are displayed as thumbnails (file content is displayed as
    small images).
    • Depending on the JPEG file, a thumbnail may not be displayed.
    In this case, a file icon is displayed.

    A Play images in JPEG format, or run Slideshow.
    To play images in JPEG format s p.31
    To run Slideshow s p.32

    B When a JPEG image is displayed, press the [
    the [

    q

    If all files and folders cannot be displayed at the same time in the
    current screen, press the [Page] (Down) button on the remote control
    or position the cursor on Next page at the bottom of the screen and
    press the [Enter] button.
    To return to the previous screen, press the [Page] (Up) button on the
    remote control or position the cursor on Previous page at the top of
    the screen and press the [Enter] button.

    B Press the [Enter] button.
    The selected image is displayed.

    ] button.

    ] button or



  • Page 31

    Presentations Using Slideshow

    31

    Projecting images
    Procedure

    A Start Slideshow. s p.29
    The file list screen is displayed.

    B Use the [

    ][
    ][ ][ ] buttons to position the cursor
    on the image file to be projected.

    Projecting Image Files
    Image files on USB storage and image files on a digital camera can be
    projected using Slideshow in either of the following two ways.
    • Projecting selected image files
    This is a function for projecting the content of a single file.
    • Projecting all image files in a folder in sequence (Slideshow)
    This is a function for projecting the content of files in a folder in
    order, one file at a time.

    Attention
    Do not disconnect the USB storage device while it is being accessed. Slideshow
    may not operate correctly.

    Although the following steps are explained based on the remote control,
    you can perform the same operations from the projector's control panel.

    A

    Image file

    C Press the [Enter] button.
    The image starts to play back.



  • Page 32

    Presentations Using Slideshow

    32

    Procedure

    A Start Slideshow. s p.29
    The file list screen is displayed.

    B Use the [

    ][
    ][ ][ ] buttons to position the cursor
    on the folder to be played by Slideshow and press the [Enter]
    button.

    D Press the [Esc] button to return to the file list screen.
    Projecting all image files in a folder in sequence (Slideshow)
    You can project the image files in a folder in sequence, one at a time. This
    function is called Slideshow. Use the following procedure to run
    Slideshow.

    q

    To change files automatically when you run Slideshow, set Screen
    switching time from Option in Slideshow to anything other than No.
    The default setting is 3 seconds. s "Image File Display Settings and
    Slideshow Operation Settings" p.33

    C Select Slideshow from the the bottom of the file list screen,

    and then press the [Enter] button.
    Slideshow starts, and the image files in the folder are automatically
    projected in sequence, one at a time.
    When the last file is projected, the file list is displayed again
    automatically. If you set Continuous Play to On from the Option
    screen, projection starts again from the beginning when it reaches the
    end. s "Image File Display Settings and Slideshow Operation
    Settings" p.33
    You can proceed to the next screen, return to the previous screen, or
    stop playback while projecting a Slideshow.

    q

    If Screen switching time on the Option screen is set to No, files do
    not change automatically when you select Play Slideshow. Press the
    [Enter] button or the [Page] (Down) button on the remote control to
    project the next file.



  • Page 33

    Presentations Using Slideshow

    33

    Image File Display Settings and Slideshow
    Operation Settings
    You can set the file display order and Slideshow operations on the Option
    screen.
    Although the following steps are explained based on the remote control,
    you can perform the same operations from the projector's control panel.

    Procedure

    A Use the [

    ][
    ][ ][ ] buttons to position the cursor
    on the folder for which you want to set display conditions and
    press the [Esc] button. Select "Option" from the sub-menu that
    is displayed, and then press the [Enter] button.

    B When the following Option screen is displayed, set each of the

    items.
    Position the cursor on the setting of the item you want to change and
    press the [Enter] button to enable the setting.
    The following table shows the details of each item.

    Display order

    Set the order of the files to be displayed. You can select
    sorting of the files into either Name order or Date order.

    Continuous
    Play

    Set whether to repeat the Slideshow.

    Screen switch‐
    ing time

    Set the time to display one file when playing a Slideshow.
    You can set No or a time from (0) to 60 seconds. When you
    set No, auto play is disabled.

    C Use the [

    ][
    ][ ][ ] buttons to position the cursor
    on "OK" and press the [Enter] button.
    The settings are applied.
    If you do not want to apply the settings, position the cursor on
    Cancel and press the [Enter] button.



  • Page 34

    Connecting External Equipment

    34

    Connecting and Removing USB Devices
    USB memories and USB compatible digital cameras, hard disk drives, and
    the optional Document Camera can be connected to the projector. Image
    files on a connected digital camera or JPEG files on a connected USB
    storage device can be played back as a Slideshow. s "Presentations Using
    Slideshow" p.28
    When the optional Document Camera is connected, images from the
    Document Camera will be projected.

    Connecting USB devices
    This section describes how to connect USB devices, using the optional
    Document Camera as an example. Connect the Document Camera to the
    projector using the USB cable supplied with the Document Camera. When
    the Document Camera is connected to the projector during projection,
    press the [USB] button on the remote control or the [Source Search] button
    on the control panel to switch to images from the Document Camera.
    s p.21

    A To Document Camera USB port
    B USB cable
    C USB(TypeA) port

    Attention
    • If you use a USB hub, operation may not be performed correctly. Connect a
    digital camera or USB storage device directly to the projector.

    • When connecting and using a USB-compatible hard disk, make sure you
    connect the AC adaptor supplied with the hard disk.
    • Connect a digital camera or hard disk to the projector using the USB cable
    supplied with or specified for use with the equipment.

    Removing USB devices
    After projection is finished, use the following procedure to remove the USB
    device from the projector.



  • Page 35

    Connecting External Equipment

    Procedure
    Disconnect the optional Document Camera from the projector's
    USB(TypeA) port.
    For digital cameras, hard disks, and so on, turn off the power to the device
    and then remove.

    Connecting an External Monitor
    You can display computer images input from Computer1 input port on an
    external monitor and the screen connected to the projector at the same
    time. This means that you can check projected images on an external
    monitor when giving presentations even if you cannot see the screen.
    Connect using the cable supplied with the external monitor.

    A To Monitor port
    B Cable supplied with monitor

    35

    C To Monitor Output (Monitor Out) Port

    q

    • You cannot display component video signals or images from
    equipment connected to the Video input port or S-Video input port
    on an external monitor.
    • Setting gauges for functions such as Keystone, Configuration Menu,
    or Help screens are not output to the external monitor.



  • Page 36

    Connecting External Equipment

    Connecting External Speakers
    You can connect external speakers with built-in amplifiers to the projector's
    Audio Output (Audio out) port to enjoy better sound quality. Connect with
    a commercially available audio cable (such as pin plug W 3.5 mm stereo
    mini plug). Use an audio cable compatible with the connector on the
    external speakers.

    36

    Connecting a microphone
    You can output microphone audio from the projector's speaker by
    connecting a microphone to the projector's Microphone (Mic) input port.
    The projector does not support plug-in-power.

    A To Microphone (Mic) input port
    A To external audio equipment
    B Audio cable (commercially available)
    C To Audio Output (Audio Out) port

    q

    • When the audio cable jack is inserted into the Audio Output (Audio
    Out) port, audio stops being output from the projector's built-in
    speakers and switches to external output.
    • When using a commercially available 2RCA(L/R)/stereo mini-pin
    audio cable, make sure it is labeled "No resistance".



  • Page 37

    Connecting a LAN Cable
    Connect with a commercially available 100BASE-TX or 10BASE-T LAN
    cable.

    A To LAN port
    B LAN cable (commercially available)
    C To LAN port

    Attention
    To prevent malfunctions, use a category 5 shielded LAN cable.

    37



  • Page 38

    Installing the Wireless LAN Unit

    38

    Install the optional wireless LAN unit in the projector. s "Optional
    Accessories and Consumables" p.116

    Procedure

    A Open the air filter cover.
    Slide the air filter cover open/close lever horizontally to open the air
    filter cover.

    C Secure the Wireless LAN unit using the screw included to avoid
    losing the unit.

    A Screw hole to fix wireless LAN unit

    B Install the Wireless LAN unit.



  • Page 39

    Functions for Enhancing Projection
    Selecting the Projection Quality (Selecting Color
    Mode)

    39

    Procedure
    Remote Control

    You can easily obtain the optimum image quality simply by selecting the
    setting that best corresponds to your surroundings when projecting. The
    brightness of the image varies depending on the mode selected.
    Mode

    Application

    Dynamic

    Ideal for use in a bright room. This is the brightest mode,
    and reproduces shadow tones well.

    Presentation

    Ideal for making presentations using color materials in a
    bright room.

    Theatre

    Ideal for watching films in a dark room. Gives images a
    natural tone.

    Photo

    (When inputting computer image signals or the input
    source is USB or LAN)
    Ideal for projecting still pictures, such as photos, in a
    bright room. The images are vivid and brought into
    contrast.

    Sports

    (When Component Video, S-Video, or composite video
    images are input)
    Ideal for watching TV programmes in a bright room.
    The images are vivid and brought to life.

    sRGB g

    Ideal for images that conform to the sRGB color
    standard.

    Blackboard

    Even if you are projecting onto a Blackboard
    (greenboard), this setting gives your images a natural
    tint, just like when projecting onto a screen.

    Whiteboard

    Ideal for making presentations using a whiteboard.

    Each time you press the button, the Color Mode name is displayed on the
    screen and the Color Mode changes.
    If you press the button while the Color Mode name is displayed on the
    screen, it changes to the next Color Mode.

    q

    The color mode can also be set from Color Mode in the Image menu
    from the Configuration Menu. s p.74



  • Page 40

    Functions for Enhancing Projection

    Setting the Auto Iris
    By automatically setting the luminance according to the brightness of the
    displayed image, it lets you enjoy deep and rich images.

    Procedure

    40

    Hiding the Image and Sound Temporarily (A/V
    Mute)
    You can use this when you want to turn off screen images so that the
    audience's attention is focused on what you are saying, or when you do not
    want the audience to see operations such as changing files.

    A Press the [Menu] button and select Image - Auto Iris from the
    Configuration Menu. s "Using the Configuration Menu"
    Using the Remote Control

    Using the Control panel

    Procedure
    Remote Control

    B Select "On".
    The setting is stored for each Color Mode.

    C Press the [Menu] button to close the Configuration Menu.

    q

    Auto Iris can only be set when the Color Mode is set to Dynamic or
    Theatre.

    Each time you press the button, A/V Mute turns on or off.

    q

    • If you use this function when projecting moving images, the images
    and sound continue to be played back by the source, and you
    cannot return to the point where A/V Mute was activated.
    • You can choose to display Black, Blue, or Logo as the A/V Mute
    display using the Extended - Display - A/V Mute setting from the
    configuration menu. s p.78
    • Microphone audio is also output when A/V Mute is turned on.



  • Page 41

    Functions for Enhancing Projection

    Freezing the Image (Freeze)
    When the moving image on the screen is frozen, the image continues to
    project, so you can project a moving image one frame at a time like a still
    photo. Also, you can perform operations such as changing between files
    during presentations from a computer without projecting any images if the
    freeze function is activated beforehand.

    41

    Changing the Aspect Ratio
    Change the Aspect Ratiog when video equipment is connected so that
    images that have been recorded in digital video or onto DVDs can be
    viewed in 16:9 wide-screen format. Change the Aspect Ratio when
    projecting computer images at full size.
    The changing methods and the types of Aspect ratio are as follows.

    Procedure
    Changing methods
    Remote Control

    Procedure
    Remote Control

    Each time you press the button, Freeze turns on or off.

    q

    • Audio does not stop.
    • For moving images, the images continue to play back while the
    screen is frozen, so it is not possible to resume projection from the
    point where the screen was frozen.
    • If the [Freeze] button is pressed while the Configuration Menu or a
    Help screen is displayed, the menu or Help screen being displayed is
    cleared.
    • Freeze still works while E-Zoom is being used.

    Each time you press the button, the Aspect name is displayed on the screen
    and the Aspect changes.

    q

    The aspect ratio can also be set from Aspect in the Signal menu from
    the Configuration Menu. s p.75



  • Page 42

    Functions for Enhancing Projection

    Changing the aspect ratio for video equipment images
    EB-460i/460

    Each time you press the button, the aspect ratio changes between 4:3 and
    16:9.

    EB-450Wi/450W/440W

    Each time the button is pressed, the aspect ratio changes in the order of
    Normal, 16:9, Full, Zoom, and Native.

    A Normal
    B 16:9

    42

    C Full
    D Zoom
    E Native



  • Page 43

    Functions for Enhancing Projection

    43

    Changing the aspect ratio for computer images (EB-460i/460)
    You can change the aspect ratio as follows.
    Set Values

    Operation

    Projection example

    Normal

    Projects to the full projection size retaining the Aspect of the
    input image.

    4:3

    Projects to the full projection size at an Aspect of 4:3. This is When a 1280x1024 signal is input
    ideal for when you want to project images at an Aspect of 5:4
    (1280 x 1024) to the full projection size.

    16:9

    Projects at a 16:9 Aspect. This is ideal for projecting at full
    screen size when using a 16:9 screen.

    q

    When a 1280x1024 signal is input

    If parts of a projected image are missing and not all of the image can be projected, set Resolution from the Configuration Menu to Wide or Normal according to
    your computer's panel size. s p.75



  • Page 44

    Functions for Enhancing Projection

    44

    Changing the aspect ratio for computer images (EB-450Wi/450W/440W)
    You can change the aspect ratio as follows. EB-450Wi/450W/440W offers a panel resolution of WXGA so the projection size is 1280x800 dots (aspect ratio of
    16:10). When projecting onto a 16:9 screen, set the the aspect ratio to 16:9.
    Set Values

    Operation

    Projection example

    Normal

    Projects to the full projection size retaining the Aspect of the When a 1024x768 signal is input
    input image.

    16:9

    Projects to the full projection size at an Aspect of 16:9.

    When a 1024x768 signal is input

    Full

    Project at full size.

    When a 1024x768 signal is input

    Zoom

    Projects the input image at the lateral direction aspect size as When a 1024x768 signal is input
    it is. Parts that extend beyond the projection size are not
    projected.



  • Page 45

    Functions for Enhancing Projection

    Set Values
    Native

    q

    45

    Operation

    Projection example

    Projects at the resolution of the input image size to the center When an 800x600 signal is input
    of the screen. This is ideal for projecting clear images.
    If the image resolution exceeds 1280x800, the edges of the
    image are not projected.

    When an 1400x1050 signal is input

    If parts of a projected image are missing and not all of the image can be projected, set Resolution from the Configuration Menu to Wide or Normal according to
    your computer's panel size. s p.75



  • Page 46

    Functions for Enhancing Projection

    Using the Pointer to Highlight Sections (Pointer)

    46

    B Move the Pointer icon (
    Remote Control

    This allows you to move a Pointer icon on the projected image, and helps
    you draw attention to the area you are talking about.

    Procedure

    A Display the Pointer.
    Remote Control

    When you press two of the [
    ][
    ][ ][ ] buttons that
    are adjacent to each other at the same time, the pointer can be
    moved diagonally instead of up, down, left, or right.

    q

    You can choose from three different kinds of Pointer icon (
    or

    ,

    ,

    ) in Settings - Pointer Shape from the Configuration Menu.

    s p.76

    Each time you press the button, the pointer appears or disappears.

    ).



  • Page 47

    Functions for Enhancing Projection

    Enlarging Part of the Image (E-Zoom)

    47

    B Move the cross (

    ) to the part of the image that you want to

    enlarge.

    This is useful when you want to expand images to see them in greater
    detail, such as graphs and tables.

    Procedure

    A Start E-Zoom.
    Remote Control

    Remote Control

    When you press two of the [
    ][
    ][ ][ ] buttons that
    are adjacent to each other at the same time, the cross can be moved
    diagonally instead of up, down, left, or right.

    C Enlarge.
    Remote Control

    Each time the button is pressed, the area is expanded. You can
    expand quickly by holding the button down.
    You can reduce the enlarged image by pressing the x button.
    Press the [Esc] button to cancel.



  • Page 48

    Functions for Enhancing Projection

    q

    48

    • The enlargement ratio appears on the screen. The selected area can
    be enlarged to between 1 to 4 times in 25 incremental steps.
    • Press the [

    ][

    ][

    ][

    ] buttons to scroll the image.

    • If E-Zoom is selected, Progressive and Noise Reduction are
    cancelled.

    Operating the Mouse Pointer by Remote Control
    (Wireless Mouse)
    To activate the Wireless Mouse function, set USB Type B to Wireless
    Mouse from the Extended menu in the Configuration Menu.
    The following shows the default settings for USB Type B.
    • EB-460i/450Wi: Off
    • EB-460/450W/440W: USB Display
    Change the setting beforehand. s p.78
    By connecting a computer's USB port and the USB(TypeB) on the side of
    the projector with the supplied USB cable, you can use the projector's
    remote control like a wireless mouse to control the computer's mouse
    pointer.

    OS

    Windows

    Mac OS

    Windows 98
    Windows 98SE
    Windows Me
    Windows 2000
    Windows XP
    Windows Vista
    Windows 7

    Mac OS X 10.3.x
    Mac OS X 10.4.x
    Mac OS X 10.5.x
    Mac OS X 10.6.x



  • Page 49

    Functions for Enhancing Projection

    q

    • The Wireless Mouse function can only be used when the input
    source is Computer1/Computer2 and the input signal is RGB.
    • You may not be able to use the Wireless Mouse function in some
    versions of Windows and Mac OS.
    • Some computer settings may have to be changed in order for the
    mouse function to be used. Consult the documentation for the
    computer for further details.

    Once the connection has been made, the mouse pointer can be operated as
    follows.
    Moving the mouse pointer

    Mouse clicks

    Left click: Press the [Enter] button.
    Right click: Press the [Esc] button.
    Double click: Press quickly twice.
    Drag and drop

    Switching PowerPoint screens
    This is useful for displaying the
    previous or next slide in a PowerPoint
    Slideshow.

    : Keep pressed
    1. While holding down the [Enter]
    button, press the [
    ],
    [

    ], [

    ], or [

    ] button.
    To previous slide

    49

    2. Release the [Enter] button to drop at
    the desired location.

    q

    • When you press two of the [

    To next slide

    ][

    ][

    ][

    ] buttons

    that are adjacent to each other at the same time, the pointer can be
    moved diagonally instead of up, down, left, or right.
    • If the mouse button settings are set to reverse on the computer, the
    operation of the Remote Control buttons will also be reversed.
    • The Wireless Mouse function cannot be used while the following
    functions are being used.
    -While the Configuration Menu is being displayed
    -While a Help menu is being displayed
    -While the E-Zoom function is being used
    -While a User's Logo is being captured
    -While a User Pattern is being captured
    -While the Pointer function is being used
    -While the Volume is being adjusted
    -While USB Display is being operated
    -While a Pattern is being displayed
    -While Color Mode is being set
    -While the Source name is being displayed



  • Page 50

    Security Functions
    The projector has the following enhanced security functions.
    • Password Protect
    You can limit who can use the projector.
    • Control Panel Lock
    You can prevent people changing the settings on the projector without
    permission. s p.52
    • Anti-Theft Lock
    The projector is equipped with various types of anti-theft security devices.
    s p.53

    Managing Users (Password Protect)
    When Password Protect is activated, people who do not know the Password
    cannot use the projector to project images even if the projector power is on.
    Furthermore, the user's logo that is displayed when you turn on the
    projector cannot be changed. This acts as an anti-theft device as the
    projector cannot be used even if it is stolen. At the time of purchase,
    Password Protect is not activated.

    Type of Password Protect
    The following three kinds of Password Protect settings can be made
    according to how the projector is being used.
    1. Power On Protect
    When Power On Protect is On, you need to enter a preset Password after the
    projector is plugged in and turned on (this also applies to Direct Power On). If the
    correct Password is not entered, projection does not start.

    50

    2. User's Logo Protect
    There is little point in going to the trouble of saving a User's Logo to indicate the
    owner of a projector if the logo display is changed later. When User's Logo Protect
    is set to On, changing the following settings for the User's Logo is prohibited.

    • Capturing a User's Logo
    • Settings for Display Background, Startup Screen, and A/V Mute
    from Display in the Configuration Menu.
    3. Network Protect
    When Network Protect is set to On, changing the settings for Network in the
    Configuration Menu is prohibited.

    Setting Password Protect
    Use the following procedure to set Password Protect.

    Procedure

    A During projection, hold down the [Freeze] button for about
    five seconds.
    The Password Protect setting menu is displayed.
    Remote Control



  • Page 51

    Security Functions

    q

    Select Power On Protect, and then press the [Enter] button.
    Select On, and then press the [Enter] button.
    Press the [Esc] button.

    C Turn on User's Logo Protect.
    (1)
    (2)
    (3)

    Select User's Logo Protect, and then press the [Enter] button.
    Select On, and then press the [Enter] button.
    Press the [Esc] button.

    D Turn on Network Protect.
    (1)
    (2)
    (3)

    Select Network Protect, and then press the [Enter] button.
    Select On, and then press the [Enter] button.
    Press the [Esc] button.

    E Set the Password.
    (1)
    (2)

    (3)

    Remote Control

    • If Password Protect is already activated, you are requested to enter
    the Password.
    If the Password is entered correctly, the Password Protect setting
    menu is displayed. s "Entering the Password" p.51
    • When the password is set, stick the supplied password protect sticker
    in a visible position on the projector as a further theft deterrent.

    B Turn on Power On Protect.
    (1)
    (2)
    (3)

    51

    Select Password, and then press the [Enter] button.
    When the message "Change the password?" is displayed, select Yes and
    then press the [Enter] button. The default setting for the Password is
    "0000". Make sure you change this to your own desired password. If you
    select No, the screen displayed in step 1 is displayed again.
    While holding down the [Num] button, enter a four digit number using the
    numeric buttons. The number entered is displayed as "* * * *". When you
    enter the fourth digit, the confirmation screen is displayed.

    (4)

    Re-enter the Password.
    The message "Password accepted." is displayed.
    If you enter the Password incorrectly, a message is displayed prompting
    you to re-enter the password.

    Entering the Password
    When the Password entry screen is displayed, enter the Password using the
    numeric buttons on the Remote Control.

    Procedure
    While holding down the [Num] button, enter the Password by
    pressing the numeric buttons.
    When you enter the correct Password, projection begins.



  • Page 52

    Security Functions

    Attention
    • If an incorrect password is entered three times in succession, the message "The
    projector's operation will be locked." for about five minutes, and then the
    projector switches to standby mode. If this happens, disconnect the power plug
    from the electrical outlet and then reinsert it and turn the projector's power
    back on. The projector displays the Password entry screen again so that you
    can enter the correct Password.
    • If you have forgotten the password, make a note of the "Request Code: xxxxx"
    number that appears on the screen and contact the nearest address provided in
    the Support and Service Guide. s Epson Projector Contact List
    • If you continue to repeat the above operation and enter the wrong Password
    thirty times in succession, the following message is displayed and the projector
    does not accept any more password entries. "The projector's operation will be
    locked. Contact Epson as described in your documentation". s Epson
    Projector Contact List

    52

    Procedure

    A During projection, press the [Menu] button and select Control
    Panel Lock from the Settings Menu in the Configuration Menu.
    s "Using the Configuration Menu" p.73
    Using the Remote Control

    Using the Control panel

    Restricting Operation (Control Panel Lock)
    Perform one of the following to lock the operation buttons on the Control
    panel.
    • Full Lock
    All of the buttons on the Control panel are locked. You cannot perform
    any operations from the Control panel, including turning the power on or
    off.
    • Partial Lock
    All of the buttons on the Control panel, except for the [t] button, are
    locked.
    This is useful at events or shows when you want to deactivate all buttons
    and only project, or at schools when you want to limit button operation.
    The projector can still be operated using the Remote Control.

    B Select either Full Lock or Partial Lock.

    C Select Yes when the confirmation message is displayed.
    The Control panel buttons are locked according to the setting you
    chose.



  • Page 53

    Security Functions

    q

    You can release the Control panel lock by one of the following two
    methods.
    • From the Remote Control, select Off in Settings - Control Panel
    Lock from the Configuration Menu.
    • Press and hold down the [Enter] button on the Control panel for
    about seven seconds, a message is displayed and the lock is released.

    53

    Anti-Theft Lock
    As the projector is often setup on ceiling mounts and left in rooms
    unattended, the projector includes the following security devices to prevent
    someone from taking the projector.
    • Security slot
    The Security slot is compatible with the Microsaver Security System
    manufactured by Kensington. You can find details about the Microsaver
    Security System on the Kensington homepage http://
    www.kensington.com/.
    • Security cable installation point
    A commercially available theft-prevention wire lock can be used to secure
    the projector to a pillar.

    Installing the wire lock
    Pass an anti-theft wire lock through the installation point.
    See the documentation supplied with the wire lock for locking instructions.



  • Page 54

    Easy Interactive Function (EB-460i/450Wi only)

    54

    Summary of Easy Interactive Function
    • By simply connecting a computer to the projector, you can control the
    computer on the projection screen and give an effective, interactive
    presentation or lesson.
    • Using the dedicated Easy Interactive Pen
    The supplied pen (Easy Interactive Pen) can be used like a mouse, which
    allows you to treat the projection surface in the same way as a computer
    screen. You can use an application with a drawing function to draw
    diagrams and write text on the projection surface.

    q

    Download Easy Interactive Tools, a dedicated application for the
    drawing function, from the Epson Web site.
    s http://www.epson.com

    • Position alignment (Calibration)
    This operation is for aligning the pen position on the projection surface
    and the mouse position on the computer screen in order to use the Easy
    Interactive Pen. Touching the reference points displayed on the projection
    surface with the Easy Interactive Pen enables operation on the projection
    surface using the Easy Interactive Pen.



  • Page 55

    Easy Interactive Function (EB-460i/450Wi only)

    55

    Operation Steps

    OS

    Windows 2000 Service Pack 4 or later
    Windows XP Service Pack 2 or later
    (Home Edition/Professional)
    Windows Vista*
    (All editions except for Starter)
    Windows 7*

    CPU

    Pentium III 1.2GHz or faster
    Recommended: Pentium M 1.6GHz or faster

    Amount of Memory

    256MB or more

    Hard Disk
    Free Space

    100MB or more

    Display

    Resolution greater than XGA (1024x768)

    Using Easy Interactive Function for the first time
    s p.56

    It is only necessary to install the driver and perform calibration the first
    time.
    1.

    Connect the computer cable and USB cable, and turn on the computer.

    2.

    Install Easy Interactive Driver.

    3

    Turn on the projector and start Easy Interactive Driver.

    4.

    Perform position alignment (calibration).

    *

    32-bit versions only

    For Mac OS

    OS

    Mac OS X 10.3.x
    Mac OS X 10.4.x
    Mac OS X 10.5.x
    Mac OS X 10.6.x

    CPU

    Power PC G3 900MHz or faster
    Recommended: Intel Core Duo 1.5GHz or faster

    s p.59

    Amount of Memory

    256MB or more

    You can use Easy Interactive Function by just starting Easy Interactive
    Driver.

    Hard Disk
    Free Space

    100MB or more

    You will need to perform calibration again when you use a computer with a
    different resolution or change the projection area.

    Display

    Resolution greater than XGA (1024x768)

    After calibration, Easy Interactive Function is ready for use.

    From the second time

    System Requirements
    For Windows

    q

    Some settings on the computer may need to be changed to use the
    mouse function. See the documentation supplied with the computer.



  • Page 56

    Easy Interactive Function (EB-460i/450Wi only)

    Using Easy Interactive Function for the First Time
    Procedure

    56

    (3)
    (4)
    (5)

    A Connect the projector and computer with the computer cable
    and USB cable.

    B Turn on the computer.
    C Install Easy Interactive Driver.

    q

    Check the following points before starting installation.
    • Install the software as a user with administrator authority.
    • Close all running applications and then start the installation.

    q

    Select Start up. and Launch Easy Interactive Driver Ver.x.xx.
    *These two settings are not displayed in Mac OS 10.3.
    Follow the on-screen instructions to install.
    When Finished is displayed, the installer closes and Easy Interactive Driver
    starts automatically.
    • When the setup program does not start automatically (Windows
    only)
    Select Start - Run to open the Run dialog box, type the letter for
    your CD-ROM drive followed by :\EIDriverVxxx_Setup.exe, and
    then click OK.
    • When Easy Interactive Driver does not start automatically
    For Windows

    Select Start - Programs (or All Programs) - EPSON Projector Easy Interactive Driver Ver.x.xx.
    For Mac OS

    For Windows

    (1)

    (2)
    (3)
    (4)
    (5)

    Insert the "EPSON Projector Software for Easy Interactive Function
    Ver.x.xx" CD-ROM into your computer.
    The setup program starts automatically.
    Select the language you want to use on the language selection screen, and
    click Next >.
    Follow the on-screen instructions to install.
    Select Register to Startup and Launch Easy Interactive Driver Ver.x.xx.
    Click Finish to close the installer and automatically start Easy Interactive
    Driver.

    For Mac OS

    (1)
    (2)

    Insert the "EPSON Projector Software for Easy Interactive Function
    Ver.x.xx" CD-ROM into your computer.
    Double-click EIDriverV100_Setup in the EPSON window.

    Double-click the Applications folder of the hard disk volume on
    which Easy Interactive Driver is installed, and then double-click the
    Easy Interactive Driver icon.
    • When uninstalling Easy Interactive Driver
    For Windows

    Select Start - Settings - Control Panel - Add-Remove Programs or
    Add or Remove Programs and then remove Easy Interactive
    Driver.
    For Mac OS

    Run EIDriverVxxx_Uninstaller in the the hard disk volume on
    which Easy Interactive Driver is installed.



  • Page 57

    Easy Interactive Function (EB-460i/450Wi only)

    D Turn on the projector.

    57

    E The connection status is indicated by an icon.

    Check the following when images are not projected.

    For Windows

    • Change the projector's input source to Computer1 or Computer2.
    s p.21

    The icon is displayed in the notification area of the taskbar.
    <Connected>

    • Change the output destination for the video signals on the
    computer. sComputer's documentation

    <Not Connected>

    Images are projected shortly after you make the changes.
    Example of Changing Output
    Epson

    Macintosh

    NEC
    Panasonic
    SOTEC

    Make mirroring settings
    or perform display
    detection. Depending on
    the OS, the output can be
    changed with
    .

    For Mac OS

    The icon is displayed in the Dock.
    <Connected>

    <Not Connected>

    HP
    Toshiba
    Lenovo/IBM

    q

    SONY
    DELL
    Fujitsu

    Computer
    only
    On some computers, the
    display state changes as
    follows each time you press
    the keys for changing the
    output.

    Screen only

    Both

    • It may take a few seconds for the icon to indicate the connection
    status.
    • If the not connected icon is displayed, check whether or not the
    projector and computer are connected with the USB cable correctly.
    You may be able to resolve the problem by disconnecting and then
    reconnecting the USB cable.



  • Page 58

    Easy Interactive Function (EB-460i/450Wi only)

    F Start calibration.
    Check that the icon is indicating the connected status.
    Perform calibration with either Calibrate (Normal) (number of
    points: 25) or Calibrate (Advanced) (number of points: 49).

    58

    H A dot flashes in the top left of the screen.
    If you touch the center of the dot with the tip of the Easy Interactive
    Pen, the dot changes from flashing to lit.

    We recommend that you normally use the Calibrate (Normal). Select
    Calibrate (Advanced) when higher accuracy is required.
    For Windows

    Click the icon in the notification area of the taskbar, and select an
    item from the menu that is displayed.

    Using Easy Interactive Pens p.18
    For Mac OS

    Click the icon in the Dock or Calibrate on the menu bar, and select
    an item from the menu that is displayed.

    For details on calibration, see s "Calibration" p.61.

    G Click "OK" when the calibration start message is displayed.

    q

    Make sure you touch the center of the dot. The dot changes from
    flashing to lit even if you touch an area outside of the circle. Since
    calibration is performed using the position touched, positioning may
    be offset if you touch an area other than the center of the circle.

    I The dots are displayed in order from the top left to bottom
    right of the screen.
    Repeat step 9 until all of the dots are lit.



  • Page 59

    Easy Interactive Function (EB-460i/450Wi only)

    59

    For Mac OS

    Click the icon in the Dock or Easy Interactive Driver on the menu
    bar, and select Quit from the menu that is displayed.

    q

    It may take a few seconds for the Easy Interactive Driver icon to
    change to connected status after all of the dots are lit.

    J After calibration, you can use the Easy Interactive Pen to

    perform the same operations as a mouse on the projection
    surface.

    K Use the following procedure to end the Easy Interactive

    Using Easy Interactive Function from the Second
    Time

    Function.

    For Windows

    Click the icon in the notification area of the taskbar, and select
    Exit.

    Procedure

    A Turn on the projector and computer.
    Check that the projector and computer are connected with the
    computer cable and USB cable.



  • Page 60

    Easy Interactive Function (EB-460i/450Wi only)

    B Easy Interactive Driver starts automatically.
    Use the following procedure to start Easy Interactive Driver if it does
    not start.
    For Windows

    Select Start - Programs (or All Programs) - EPSON Projector Easy Interactive Driver Ver.x.xx.
    For Mac OS

    Double-click the Applications folder of the hard disk volume on
    which Easy Interactive Driver is installed, and then double-click the
    Easy Interactive Driver icon.

    C The connection status is indicated by an icon.
    For Windows

    60

    q

    • It may take a few seconds for the icon to indicate the connection
    status.
    • If the not connected icon is displayed, check whether or not the
    EB-460i/450Wi and computer are connected with the USB cable
    correctly.
    You may be able to resolve the problem by disconnecting and then
    reconnecting the USB cable.

    D Use the following procedure to end the Easy Interactive
    Function.

    For Windows

    Click the icon in the notification area of the taskbar, and select
    Exit.

    The icon is displayed in the notification area of the taskbar.
    <Connected>

    <Not Connected>

    For Mac OS
    For Mac OS

    Click the icon in the Dock or Easy Interactive Driver on the menu
    bar, and select Quit from the menu that is displayed.

    The icon is displayed in the Dock.
    <Connected>

    <Not Connected>

    After the projector and computer are connected, you can use Easy
    Interactive Pen to perform the same operations as a mouse on the
    projection surface.



  • Page 61

    Easy Interactive Function (EB-460i/450Wi only)

    Calibration
    To use Easy Interactive Function, you need to make sure you perform
    calibration to align the pen position on the screen and the mouse position
    on the projection screen with the Easy Interactive Pen.
    There are two calibration modes: Calibrate (Normal) and Calibrate
    (Advanced).
    Specify 25 points with the Calibrate (Normal), and 49 points with the
    Calibrate (Advanced).
    Make sure you perform calibration the first time you use Easy Interactive
    Function. After that, you only need to perform calibration if the usage
    environment changes, for example if the connected computer is changed or
    the projection area is changed.

    Cases in which calibration is required
    In the following cases, the positioning of the Easy Interactive Pen on the
    projection surface and the mouse on the computer may be offset. When
    position offset becomes a problem, perform calibration again.
    • When the computer's resolution is changed.
    • When a computer with a resolution that differs from the last time
    calibration was performed is connected.
    • When Keystone is performed from the Settings Menu in the
    Configuration Menu.
    • When Zoom is changed from the Settings Menu in the Configuration
    Menu.
    • When Auto Setup is performed from the Signal menu in the
    Configuration Menu.
    • When Resolution is changed from the Signal menu in the Configuration
    Menu.
    • When Tracking is changed from the Signal menu in the Configuration
    Menu.

    61

    • When
    Menu.
    • When
    Menu.
    • When
    Menu.
    • When
    • When

    q

    Sync. is changed from the Signal menu in the Configuration
    Position is changed from the Signal menu in the Configuration
    Aspect is changed from the Signal menu in the Configuration
    input detection is performed automatically.
    position offset becomes a problem for other reasons.
    • If you set Projection to Rear/Ceiling from the Extended menu in the
    Configuration Menu, Easy Interactive Function cannot be used
    because the pen position and mouse position will not match.
    • The pen position and mouse position will not match while E-Zoom
    is being used.
    • When you use Easy Interactive Function while images are projected
    with EasyMP Network Projection (input source: LAN), set USB
    Type B to Wireless Mouse or Off from the Extended menu in the
    Configuration Menu.

    Replacing the Batteries for the Easy Interactive
    Pen
    When the button is pressed, the indicator for the Easy Interactive Pen turns
    on. If it does not turn on, the batteries are out of power and need to be
    replaced. Have two AAA size alkaline batteries ready. For details on other
    batteries that can be used, contact your local dealer or the nearest address
    provided in the Support and Service Guide.
    s Epson Projector Contact List

    Attention
    Make sure you read the separate Safety Instructions before handling the
    batteries. s Safety Instructions



  • Page 62

    Easy Interactive Function (EB-460i/450Wi only)

    Procedure

    A Remove the battery cover.
    While pushing the battery cover catch, lift the cover up.

    B Replace the old batteries with new batteries.

    Caution
    Check the positions of the (+) and (-) marks inside the battery holder to ensure
    the batteries are inserted correctly.

    C Reattach the battery cover.
    Press the battery cover until it clicks into place.

    62



  • Page 63

    Changing Settings Using a Web Browser (Web Control)
    You can make Configuration Menu settings and control the projector by
    using the Web browser of a computer that is connected to the projector via
    a network. By using this function you can perform setup and control
    operations remotely. In addition, since you can use the computer's
    keyboard, entering characters required for the setup is easier.
    Use Microsoft Internet Explorer 6.0 or later as the Web browser. If you are
    using Mac OS, you can also use Safari.

    q

    If you set Standby Mode to Communication On from the Extended
    menu in the projector's Configuration Menu, you can use the Web
    browser to make settings and perform control even if the projector is
    in a standby state (when the power is off).

    Some items cannot be set with a Web browser (but can be from the
    Configuration Menu) and some items can only be set with a Web browser.
    Items in the Configuration Menu that cannot be set with a Web browser
    All items in the projector's Configuration Menu can be set except for the
    following.
    • Settings Menu - Pointer Shape
    • Settings Menu - Pattern
    • Settings Menu - User Button
    • Extended Menu - Saving User's Logo
    • Extended Menu - Language
    • Extended Menu - Operation - High Altitude Mode
    • Reset Menu - Reset All, and Reset Lamp Hours
    • Password Protect Menu
    The items available in each menu are the same as the Configuration Menu
    of the projector.
    s "List of Functions" p.74
    Items that can only be set with a Web browser
    The following items can only be set with a Web browser. They cannot be
    set from the Configuration Menu.

    63

    • Network settings- Others - SNMP - Community Name
    • Network settings- Basic - Monitor Password

    Displaying Web Control
    Use the following procedure to display Web Control.

    q

    If your Web browser is set to connect via a proxy server, Web Control
    cannot be displayed. To display Web Control, you need to make
    settings so that a proxy server is not used for a connection.

    Entering the IP address of the projector
    When you are using Advanced Connection Mode, you can open Web
    Control by specifying the IP address of the projector as follows.

    Procedure

    A Start the Web browser on the computer.
    B Enter the IP address of the projector in the address input box

    of the Web browser, and press the Enter key on the computer's
    keyboard.
    Web Control is displayed.
    When Web Control Password is set from the Network menu in the
    Configuration Menu, a screen for entering the password is displayed.
    Enter the characters set for the Web Control Password.



  • Page 64

    Changing Settings Using a Web Browser (Web Control)

    64

    Displaying Web Remote
    The Web Remote function allows you to perform projector remote control
    operations with a Web browser.

    Procedure

    A Display Web Control.
    B Click Web Remote.
    Name

    C The Web Remote screen is displayed.

    Function

    A [t] button

    Turns the projector power On or Off.
    s Quick Start Guide

    B [Computer] button

    Each time you press the button, input changes between
    images from the Computer1 input port and the
    Computer2 input port. s p.22

    C [Video] button

    Each time you press the button, input changes between
    images from the Video input port and the S-Video input
    port. s p.22

    D [Freeze] button

    Pauses or resumes image playback. s p.41

    E [A/V Mute] button

    Temporarily turns the images and audio on or off.
    s p.40

    F [Page] buttons
    ([Up]) ([Down])

    When you are using the Wireless Mouse function or the
    input source is projecting a file from an application that
    supports page up/down via LAN, you can move the page
    up and down by pressing these buttons. s p.48, EasyMP
    Network Projection Operation Guide

    G [Source Search]
    button

    Changes to images from the next device inputting an
    image signal. s p.21



  • Page 65

    Changing Settings Using a Web Browser (Web Control)

    Name

    Function

    H [LAN] button

    Changes to the images projected with EasyMP Network
    Projection. When you are projecting via Quick Wireless
    Connection using the optional Quick Wireless
    Connection USB Key, this button changes to that image.
    s p.22

    I [USB] button

    Each time you press the button, input changes between
    images from the equipment connected to USB Display
    and USB(TypeA) port. s p.22

    J [Volume] buttons (a)
    (b)

    (a) Decreases the Volume.
    (b) Increases the Volume.
    s Quick Start Guide

    Caution
    Do not increase the volume too high at the start.
    A sudden increase in volume may cause loss of hear‐
    ing. Always lower the volume before turning the
    power off, and gradually increase the volume after
    turning the power on.

    65



  • Page 66

    Using the Mail Notification Function to Report Problems
    By setting the Mail Notification function from the projector's Configuration
    Menu, notification messages will be sent to the preset email addresses when
    a problem or warning occurs with a projector. This will enable the operator
    to be notified of problems with projectors even at locations away from the
    projectors.
    s "Network Menu" p.80, "Mail menu" p.87

    q

    • Up to a maximum of three notification destinations (Addresses) can
    be recorded, and notification messages can be sent to all three
    destinations at once.
    • If a projector develops a critical problem and suddenly stops
    working, it may not be able to send a message notifying an operator
    of the problem.
    • Monitoring is possible if Network On is set from the Extended
    menu of the projector's Configuration Menu, even if the projector is
    in Standby Mode (when the power is off).

    66



  • Page 67

    Management Using SNMP
    By setting SNMP from the projector's Configuration Menu, notification
    messages are sent to preset e-mail addresses when a problem or warning
    occurs with a projector. This also enables you to know about errors when
    centrally managing projectors at a distance.
    s "Network Menu" p.80, "Mail menu" p.87

    q

    • SNMP should be managed by a network administrator or someone
    who is familiar with the network.
    • The SNMP function to monitor projectors requires SNMP Manager
    to be installed on the computer.
    • The managing function using SNMP cannot be used via a Wireless
    LAN in Quick Connection Mode.
    • Up to two destination IP addresses can be saved.

    67



  • Page 68

    Saving a User's Logo

    68

    You can save the image that is currently being projected as a User's Logo.

    q

    When a User's Logo is saved, the previous User's Logo is erased.

    q

    Procedure

    A Project the image you want to save as the User's Logo, and
    then press the [Menu] button.
    Using Remote Control

    • When User's Logo Protect from Password Protect is set to On, a
    message is displayed and the User's Logo cannot be changed. You
    can make changes after setting User's Logo Protect to Off.
    s p.50
    • If User's Logo is selected when one of the Keystone, E-Zoom,
    Aspect, Progressive, and Zoom Adjustment functions is being used,
    the function currently being used is cancelled temporarily.

    C When the message "Choose this image as the User's Logo?" is
    displayed, select Yes.

    Using Control panel

    q

    When you press the [Enter] button on the remote control or the
    control panel, the screen size may change depending on the signal to
    match the actual resolution of the image signal.

    D Move the box to select the part of the image to use as the
    User's Logo.

    B Select User's Logo from the Extended menu in the

    Configuration Menu. s "Using the Configuration Menu"
    p.73
    Check the buttons you can use and the operations they perform in
    the guide under the menu.



  • Page 69

    Saving a User's Logo

    69

    G When the message "Save this image as the User's Logo?" is

    displayed, select Yes.
    The image is saved. After the image has been saved, the message
    "Completed." is displayed.

    Using Remote Control

    q

    Using Control panel

    You can save at a size of 400x300 dots.

    E When the message "Select this image?" is displayed, select
    Yes.

    F Select the zoom factor from the zoom setting screen.

    q

    • Once a User's Logo has been saved, the logo cannot be returned to
    the factory default.
    • Saving the user's logo may take approximately 15 seconds. Do not
    use the projector or any connected equipment while it is saving,
    otherwise malfunctions may occur.



  • Page 70

    Saving User Pattern

    70

    You can save the image that is currently being projected as a User Pattern.

    q

    When a User Pattern is saved, the previous User Pattern is erased.

    Procedure

    A Project the image you want to use as the User Pattern, and
    then press the [Menu] button.
    Using Remote Control

    Using Control panel

    B Select Pattern from the Settings Menu in the Configuration
    Menu. s "Using the Configuration Menu" p.73

    C Select User Pattern.



  • Page 71

    Saving User Pattern

    q

    71

    Using Remote Control

    If User Pattern is selected when one of the Keystone, E-Zoom, Aspect,
    Progressive, and Zoom Adjustment functions is being used, the
    function currently being used is cancelled temporarily.

    Using Control panel

    D When "Do you want to use the currently projected image as
    the User Pattern?" is displayed, select Yes.
    • You can save at a size of up to the projector screen size.

    • When part of the projected image is missing (when the computer
    screen is larger than the projection screen), move the displayed box
    to select the part of the image to use as the User Pattern.
    When "Select this image?" is displayed after you make a selection,
    select Yes.

    • When you press the [Enter] button on the remote control or the
    Control panel, the screen size may change depending on the signal
    to match the actual resolution of the image signal.

    E When the message "Save this image as the User Pattern?" is

    displayed, select Yes.
    The image is saved. After the image has been saved, the message "The
    User Pattern setting is complete." is displayed.

    q

    • Once a User Pattern has been saved, User Pattern cannot be
    returned to the factory default.
    • Saving the User Pattern may take approximately 15 seconds. Do not
    use the projector or any connected equipment while it is saving,
    otherwise malfunctions may occur.



  • Page 72

    Configuration Menu
    This chapter explains how to use the Configuration Menu and its functions.



  • Page 73

    Using the Configuration Menu

    Selecting from the top menu

    73

    Selecting from the sub menu

    Changing the selected item

    Exit



  • Page 74

    List of Functions

    74

    Image Menu
    Items that can be set vary depending on the image signal and Source currently being projected as shown in the following screen shots. Setting details are saved
    for each image signal and Source.
    Depending on the model used, some input sources are not supported. s p.21
    Component Videog/Composite videog/S-Video g

    Computer Signal/USB/USB Display/LAN

    Sub Menu

    Function

    Color Mode

    You can select the quality of the image to suit your surroundings. s p.39

    Brightness

    You can adjust the image Brightness.

    Contrast g

    You can adjust the difference between light and shade in the images.

    Color Saturation

    You can adjust the Color Saturation for the images.

    Tint

    (Adjustment is only possible when NTSC signals are being input if you use composite video/S-Video.)
    You can adjust the image Tint.

    Sharpness

    You can adjust the image sharpness.

    Color Adjustment

    You can make adjustments by choosing one of the following.(This item cannot be selected if the adjustment value of Color Mode is set to sRGBg from
    the Image menu.)
    Abs. Color Temp.: You can adjust the overall tint of the image. You can adjust tints in 10 stages from 5000 K to 10000 K. When a high value is selected the
    image becomes tinged with blue, when a low value is selected the image becomes tinged with red.
    Red, Green, Blue: You can adjust the saturation of each color individually.

    Auto Iris

    (This item is only displayed if the adjustment value of Color Mode is set to Dynamic or Theatre from the Image menu.)
    Set whether or not (On/Off) to adjust the iris to obtain the optimal light for the images. s p.40



  • Page 75

    List of Functions

    75

    Sub Menu

    Function
    You can reset all adjustment values of the Image menu to their default settings. To return all menu items to their default settings, see s p.91

    Reset

    Signal Menu
    Items that can be set vary depending on the image signal currently being projected as shown in the following screen shots. Setting details are saved for each
    image signal.
    You cannot make settings in the Signal menu when the input source is LAN.
    Computer image

    Sub Menu

    Component Video g

    Composite videog/S-Video g

    Function

    Auto Setup

    You can select whether or not (On/Off) to automatically adjust the image to the optimal state when the input signal changes. s p.100

    Resolution

    When set to Auto, the resolution of the input signal is automatically identified. If the images cannot be projected correctly when set to Auto, such as
    when some of the image is missing, adjust to Wide depending on the connected computer for wide screens, or set to Normal for 4:3 or 5:4 screens.

    Tracking g

    You can adjust computer images when vertical stripes appear in the images. s p.100

    Sync. g

    You can adjust computer images when flickering, fuzziness, or interference appear in the images. s p.100

    Position

    You can adjust the display Position up, down, left, and right when a part of the image is missing so that the whole image is projected.

    Progressive

    (Component Video can only be set when 480i/576i/1080i signals are being input)
    Off: IP conversion is carried out for each field in the screen. This is ideal for viewing images with a large amount of movement.
    Video: This is ideal for viewing general video images.
    Film/Auto: This is ideal for movie films, computer graphics, and animation.



  • Page 76

    List of Functions

    76

    Sub Menu

    Function

    Noise Reduction

    Smoothes out rough images. There are two modes. Select your favorite setting. Set this to Off when viewing image sources in which noise is very low,
    such as DVDs.

    Input Signal

    You can select an input signal from Computer1/2 input port.
    If this is set to Auto, the input signal is set automatically depending on the connected equipment.
    If colors do not appear correctly when this is set to Auto, select the appropriate signal depending on the connected equipment.

    Video Signal

    You can select the input signal from the Video input port. If set to Auto, video signals are recognized automatically. If interference appears in the image
    or a problem occurs such as no image is being projected when set to Auto, select the appropriate signal depending on the connected equipment.

    Aspect

    You can set the Aspect Ratiog for projected images. s p.41

    Reset

    You can reset all adjustment values in the Signal menu to their default settings, except for Input Signal.
    To return all menu items to their default settings, see s p.91

    Settings Menu

    Sub Menu

    Function

    Keystone

    You can correct keystone distortion in the vertical direction. s Quick Start Guide

    Zoom

    You can adjust Tele/Wide.

    Control Panel Lock

    You can use this to restrict operation of the projector's Control panel. s p.52

    Pointer Shape

    You can select the shape of the pointer. s p.46
    Pointer 1:

    Pointer 2:

    Pointer 3:



  • Page 77

    List of Functions

    77

    Sub Menu

    Function

    Power Consumption

    You can set the Lamp brightness to one of two settings.
    Select ECO if the images being projected are too bright such as when projecting images in a dark room or onto a small screen. When ECO is selected,
    power consumption during projection and the lamp life change as follows, and fan rotation noise is reduced. Electrical consumption: about 25%
    decrease, lamp life: about 1.4 times longer

    Volume

    You can adjust the Volume. Setting details are saved for each image signal.

    Mic Input Level

    Adjust this if the microphone input level is low and the microphone audio output from the projector's speaker is difficult to hear, or if the input level is
    too high, resulting in a crackling sound in the audio from the microphone. When Mic Input Level is turned down to 0, no microphone audio is output
    from the speaker.

    Remote Receiver

    You can limit the reception of the operation signal from the Remote Control.
    When you want to prohibit operation by Remote Control, or if the Remote Receiver has a fluorescent light too close to it, you can make settings to
    deactivate the remote receiver you do not want to use or that is experiencing interference.

    User Button

    You can select the item from the Configuration Menu with the Remote Control's User Button. By pressing the User Button the assigned menu item
    selection/adjustment screen is displayed, allowing you to make one-touch settings/adjustments. You can assign one of the following items to the User
    Button.
    Power Consumption, Info, Progressive,Test Pattern, Resolution, Mic Input Level, and Pattern Display

    Pattern

    Pattern Display: Display a pattern.
    Pattern Type: You can select from Patterns 1 to 4 or User Pattern. Patterns 1 to 4 display projection lines such as ruled lines or a grid.
    Pattern 1:

    Pattern 2:

    Pattern 3:

    Pattern 4:

    User Pattern: Captures a user pattern. s p.70
    Test Pattern: When the projector is set up, a test pattern is displayed so that you can adjust the projection status without connecting equipment. While
    the Test Pattern is displayed, zoom, focus adjustments, and Keystone correction can be performed. To cancel the Test Pattern, press the [Esc] button on
    the Remote Control or the Control panel.

    Attention
    If a pattern is displayed for a long time, a residual image may be visible in projected images.
    Reset

    You can reset all adjustment values in the Settings Menu to their default settings, except for User Button.
    To return all menu items to their default settings, see s p.91



  • Page 78

    List of Functions

    78

    Extended Menu

    Sub-menu

    Function

    Display

    You can make settings related to the projector's display.
    Messages: You can set whether or not (On/Off) to display the Source name when you change the Source, the Color Mode name when you
    change the Color Mode, a message when no image signal is input, and so on.
    Display Background*1: You can set the screen status for when no image signal is available to Black, Blue, or Logo.
    Startup Screen*1: You can set whether or not (On/Off) to display the startup screen (the image projected when starting the projector) at
    startup.
    A/V Mute*1: You can set the screen displayed during A/V Mute to Black, Blue, or Logo.

    User's Logo *1

    You can change the User's Logo that is displayed as a background during Display Background, A/V Mute, and so on. s p.68

    Projection

    You can set from the following according to the way the projector is setup. s p.20
    Front/Ceiling, Rear/Ceiling

    Operation

    Direct Power On: You can set whether or not (On/Off) to enable Direct Power On.
    When this is set to On and the power cable is plugged in, note that the projector turns automatically in cases such as a power outage being
    restored.
    Sleep Mode: When set to On, this automatically stops projection when no image signal is being input and no operations are carried
    out.
    Sleep Mode Timer: When Sleep Mode is set to On, you can set the time before the projector automatically turns off within a range of 1 to
    30 minutes in one minute increments.
    High Altitude Mode: Set to On when using the projector above an altitude of 1500 m.



  • Page 79

    List of Functions

    79

    Sub-menu

    Function

    Standby Mode

    You can use the following functions even when the projector is in standby mode if this is set to Communication On.
    • Monitor and control the status of the projector over the network.
    • The microphone input function outputs audio from the projector's speaker when a microphone is connected to the Microphone (Mic)
    input port.
    You can use SNMPg or the application software "EasyMP Monitor" supplied with this product to monitor and control the status of the
    projector over the network.
    The microphone input is also enabled if this setting is set to Communication On and Standby Microphone is set to On.

    Standby Microphone

    (Only available when the Standby Mode mentioned above is set to Communication On)
    When Standby Mode is set to Communication On, set whether microphone input is enabled (On) or disabled (Off).*2

    USB Type B

    Set
    s
    Set
    Set

    Language

    You can set the Language to use for displaying messages and menus.

    Reset

    You can return the adjustment values for Display*1 and Operation*3 in the Extended menu to their default settings.
    To return all menu items to their default settings, see s p.91

    this to USB Display when the projector and a computer are connected with a USB cable and computer images are projected.
    Quick Start Guide
    this to Wireless Mouse when the mouse pointer is to be operated by the remote control. s p.48
    this to Off when using only Easy Interactive Function (EB-460i/450Wi only). s p.54

    *1 When User's Logo Protect in Password Protect is set to On, settings related to User's Logo cannot be changed. You can make changes after setting User's Logo Protect to
    Off. s p.50
    *2 When Power On Protect in Password Protect is set to On, microphone input is not possible even when Standby Microphone is set to On.
    *3 Except for "High Altitude Mode".



  • Page 80

    List of Functions

    80

    Network Menu
    When Network Protect in Password Protect is set to On, a message is displayed and the settings cannot be changed. You can make changes after setting
    Network Protect to Off. s p.50

    Sub-menu

    Function

    Network Information

    You can confirm the setting status for each network as follows.

    Network Configuration

    The following menus are available for setting Network items.
    Basic Menu, Wireless LAN Menu, Security Menu, Wired LAN Menu, Mail Menu, Others Menu, Reset Menu, Setup complete Menu

    q

    By using the Web browser of a computer connected to the projector on a network, you can set the functions and control the projector. This function is called Web
    Control. You can easily enter text using a keyboard to make settings for Web Control such as Security settings. s p.63



  • Page 81

    List of Functions

    81

    Notes on using the Network menu
    Select items from the top menu and sub menus and change selected items
    in the same way as in the Configuration Menu.
    However, when you have finished, make sure you select the Setup complete
    menu, and select one of Yes, No, or Cancel. When you select Yes or No,
    you return to the Configuration Menu.

    Each time the [CAPS] key is selected, it sets and changes between upper
    case and lower case letters.
    Each time the [SYM1/2] key is selected, it sets and changes the symbol keys
    for the section enclosed by the frame.
    Yes: Saves the settings and closes the Network menu.
    No: Does not save the settings and closes the Network menu.
    Cancel: Continues displaying the Network menu.

    Soft keyboard operations
    The Network menu contains items that require you to enter alphanumeric
    characters when you set them. In this case, the following software keyboard
    is displayed. Use the [
    ][
    ][ ][ ] buttons on the Remote
    Control or the [w], [v], [a], and [b] buttons on the Control panel to
    move the cursor to the desired key, and then press the [Enter] button to
    enter the alphanumeric. Enter figures by holding down the [Num] button
    on the Remote Control, and pressing the numeric buttons. After inputting,
    press [Finish] on the keyboard to confirm your input. Press [Cancel] on the
    keyboard to cancel your input.



  • Page 82

    List of Functions

    82

    Basic Menu

    Sub Menu

    Function

    Projector Name

    Displays the projector name used to identify the projector when connected to a Network.
    When editing, you can enter up to 16 single-byte alphanumeric characters.

    PJLink Password

    Set a Password to use when you access the projector using compatible PJLink software. s p.123
    You can enter up to 32 single-byte alphanumeric characters.

    Web Control Password

    Set a password to use when making settings and controlling the projector using Web Control. You can enter up to 8 single-byte alphanumeric characters.
    Web Control is a computer function that allows you to set up and control the projector by using the Web browser on a computer connected on a
    Network. s p.63

    Projector Keyword

    When this is set to On, you are requested to enter the Keyword when you attempt to connect the projector and a computer via a network. As a result,
    EasyMP Network Projection can prevent presentations from being interrupted by unscheduled connections from a computer during projection.
    Normally, set this to On. s EasyMP Network Projection Operation Guide "Connecting to a Projector on a Network and Projecting"



  • Page 83

    List of Functions

    83

    Wireless LAN Menu
    Settings are enabled when the optional Wireless LAN unit is installed.

    Sub Menu

    Function

    Wireless LAN Power

    Set this to On when connecting the projector and a computer via a wireless LAN. If you do not want to connect via a wireless LAN, set this to Off to
    prevent unauthorized access by others. This is set to On by default.

    Connection Mode

    Use EasyMP Network Projection to set the mode, how the computer connect to the projector.
    Set this to Quick Connection Mode when you want to make a simple wireless connection. Set this to Advanced Connection Mode when you want to
    connect to a network system via an access point.

    Wireless LAN system

    Sets the Wireless LAN system.

    SSIDg

    Enter an SSID. When an SSID is provided for the wireless LAN system in which the projector will participate, enter the SSID.
    You can enter up to 32 single-byte alphanumeric characters.

    IP Settings

    You can make settings related to the following addresses.
    DHCPg: Set whether or not (On/Off) to use DHCP. If this is set to On, you cannot set any more addresses.
    IP Addressg: You can input the IP Address assigned to the projector. You can input a number from 0 to 255 in each field of the address. However, the
    following IP Addresses cannot be used.
    0.0.0.0, 127.x.x.x, 224.0.0.0 to 255.255.255.255 (where x is a number from 0 to 255)
    Subnet Maskg: You can input the Subnet Mask for the projector. You can input a number from 0 to 255 in each field of the address. However, the
    following Subnet Masks cannot be used.
    0.0.0.0, 255.255.255.255
    Gateway Addressg: You can input the IP Address for the gateway for the projector. You can input a number from 0 to 255 in each field of the address.
    However, the following Gateway Addresses cannot be used.
    0.0.0.0, 127.x.x.x, 224.0.0.0 to 255.255.255.255 (where x is a number from 0 to 255)



  • Page 84

    List of Functions

    84

    Sub Menu

    Function

    SSID Display

    To prevent the SSID from being displayed on Network Info in the Network menu and on the LAN Standby screen, set this to Off.

    IP Address Display

    To prevent the IP address from being displayed on Network Info in the Network Menu and on the LAN Standby screen, set this to Off.

    Security menu
    Settings are enabled when the optional Wireless LAN unit is installed.

    Sub-menu
    Security

    Function
    Select one type of security from the following items.
    When setting security, follow the instructions from the administrator of the network system you are about to access. When using Advanced Connection
    Mode, be sure to make security settings.
    WEP: An encryption key (WEP key) is used to encrypt data.
    This mechanism prevents communication unless the encryption keys for the access point and the projector match.
    WPA/WPA2: This is an encryption standard that improves security, which is considered a weak point of WEP. Although there are multiple kinds of
    WPA encryption methods, this projector uses "TKIP" and "AES".
    WPA also includes user authentication functions. WPA authentication provides two methods: using an authentication server, or authenticating
    between a computer and an access point without a using server. This projector supports the latter method, without a server.



  • Page 85

    List of Functions

    85

    When WEP is selected
    You can set the following items.
    Sub Menu

    Function

    WEP encryption

    You can set the encryption method for WEP encryption.
    128bit: Uses 128 (104) bit encoding
    64bit: Uses 64 (40) bit encoding

    Format

    You can set the input method for the WEP encryption key.
    ASCII: Input in text.
    HEX: Input in HEX (hexadecimal).

    Key ID

    You can select the WEP encryption ID key.

    Encryption key 1
    Encryption key 2
    Encryption key 3
    Encryption key 4

    You can enter the key used for WEP encryption. Enter the key in single-byte characters, following the instructions from the network administrator for
    the network in which the projector will participate. The type and number of characters that can be entered differ depending on the WEP encryption and
    Format settings.
    If the number of characters you enter is shorter than the required character length, or if the number of characters you enter is longer than the required
    character length, it does not connect.
    128bit - ASCII: Single-byte alphanumeric characters, 13 characters.
    64bit - ASCII: Single-byte alphanumeric characters, 5 characters.
    128bit - HEX: 0 to 9 and A to F, 26 characters
    64bit - HEX: 0 to 9 and A to F, 10 characters

    Authentication Type

    Set the WEP authentication type.
    Open: Uses open system authentication.
    Shared: Uses shared key authentication.

    When WPA-PSK (TKIP) or WPA2-PSK (AES) is selected
    You can set the following items.
    Sub Menu
    PSK

    Function
    You can enter a PreSharedKey (encrypted key) in single-byte alphanumeric characters. Enter at least 8 and up to 63 characters. When you enter the
    PreSharedKey, and press the [Enter] button, the setting value is displayed as asterisks (*).
    You cannot enter more than 32 characters in the Configuration Menu. If you want to set more than 32 characters, make the setting from Web Control.
    s p.63



  • Page 86

    List of Functions

    86

    Wired LAN menu

    Sub Menu

    Function

    IP Settings

    You can make settings related to the following addresses.
    DHCPg: Select whether or not (On/Off) to use DHCP. If this is set to On, you cannot set any more addresses.
    IP Addressg: You can input the IP address assigned to the projector. You can input a number from 0 to 255 in each field of the address. However, the
    following IP addresses cannot be used.
    0.0.0.0, 127.x.x.x, 224.0.0.0 to 255.255.255.255 (where x is a number from 0 to 255)
    Subnet Maskg: You can input the subnet mask for the projector. You can input a number from 0 to 255 in each field of the address. However, the
    following subnet masks cannot be used.
    0.0.0.0, 255.255.255.255
    Gateway Addressg: You can input the IP address of the gateway for the projector. You can input a number from 0 to 255 in each field of the address.
    However, the following gateway addresses cannot be used.
    0.0.0.0, 127.x.x.x, 224.0.0.0 to 255.255.255.255 (where x is a number from 0 to 255)

    IP Address Display

    To prevent the IP address from being displayed on Network Info in the Network Menu and on the LAN Standby screen, set this to Off.



  • Page 87

    List of Functions

    87

    Mail menu
    When this is set, you receive an e-mail notification if a problem or warning occurs in the projector. For information on the contents of the sent Mail,
    see "Reading Error Notification Mail" s p.106

    Sub Menu

    Function

    Mail Notification

    You can set whether or not (On/Off) to be notified by mail.

    SMTP Server

    You can input the IP addressg of the SMTP Server used by the projector.
    You can input a number from 0 to 255 in each field of the address. However, the following IP addresses cannot be used.
    127.x.x.x, 224.0.0.0 to 255.255.255.255 (where x is a number from 0 to 255)

    Port Number

    You can input the Port Number for the SMTP Server. The default value is 25. You can input numbers between 1 to 65535.

    Address 1 Setting
    Address 2 Setting
    Address 3 Setting

    Enter the Email Address and the contents of the email to receive notification when an error or warning occurs in the projector. You can enter up to 32
    characters for the mail address. You can select multiple problems or warnings to be notified about by Mail. You can also change each Email Address.

    q

    If you set Standby Mode to Communication On from the Extended menu in the Configuration Menu of the projector, you can perform monitoring even if the
    projector is in a standby state (when the power is off).



  • Page 88

    List of Functions

    88

    Others Menu

    Sub-menu

    Function

    SNMP

    Set whether or not (On/Off) to use SNMP.

    Trap IP Address 1
    Trap IP Address 2

    You can register up to two IP addresses for the SNMPg trap notification destination.
    You can input a number from 0 to 255 in each field of the address.
    However, the following IP addresses cannot be used.
    127.x.x.x, 224.0.0.0 to 255.255.255.255 (where x is a number from 0 to 255)
    To use SNMP to monitor the projector, the SNMP manager program needs to be installed on your computer. Make sure management by SNMP is
    performed by the network administrator.

    Priority gateway

    For the priority gateway, select either wireless or wired.

    AMX Device Discovery g

    When the projector is connected to a network, set this to On when you want to allow the projector to be detected by AMX Device Discovery. Set this to
    Off if you are not connected to an environment controlled with a controller from AMX or AMX Device Discovery.



  • Page 89

    List of Functions

    89

    Reset Menu
    Resets all of the network settings.

    Sub Menu
    Reset network settings.

    Function
    To reset all of the Network settings, select Yes.
    After you reset all of the settings, the Basic menu is displayed.



  • Page 90

    List of Functions

    90

    Info Menu (Display Only)
    Lets you check the status of the image signals being projected and the status of the projector. Items that can be displayed vary depending on the image signal
    and Source currently being projected as shown in the following screen shots. Depending on the model used, some input sources are not supported.
    s p.21
    Computer Signal/Component Video g/USB/USB
    Display

    Composite videog/S-Videog

    Sub-menu

    LAN

    Function

    Lamp Hours

    You can display the cumulative lamp operating time*.
    When it reaches the lamp warning time, the characters are displayed in yellow.

    Source

    You can display the Source name for the connected equipment currently being projected.

    Input Signal

    You can display the settings of Input Signal in the Signal menu depending on the Source.

    Resolution

    You can display the input resolution.

    Video Signal

    You can display the settings of Video Signal in the Signal menu.

    Refresh Rateg

    You can display the refresh rate.

    Sync Info

    You can display the image signal Information.
    This information may be needed if service is required.

    Status

    This information is about errors that have occurred with the projector.
    It may be needed if service is required.

    Serial Number

    Displays the projector's serial number.

    * The cumulative use time is displayed as "0H" for the first 10 hours. 10 hours and above is displayed in 1hour steps as "10 H", "11H", and so on.



  • Page 91

    List of Functions

    91

    Reset Menu

    Sub Menu

    Function

    Reset All

    You can reset all items in the Configuration Menu to their default settings.
    The following items are not reset to their defaults: Input Signal, User's Logo, all items in theNetwork menu, Lamp Hours, and Language.

    Reset Lamp Hours

    You can clear the cumulative lamp hours, and return it to "0H". Reset this when you replace the lamp.



  • Page 92

    Troubleshooting
    This chapter explains how to identify problems and what to do if a problem is found.



  • Page 93

    Using the Help

    93

    If a problem occurs with the projector, the Help screen is displayed to assist
    you by pressing the [Help] button. You can solve problems by answering
    the questions.

    C Confirm the selection.
    Using Remote Control

    Using Control panel

    Procedure

    A Press the [Help] button.
    The Help screen is displayed.
    Using Remote Control

    Using Control panel

    Questions and solutions are displayed as shown on the screen below.
    Press the [Help] button to exit the Help.

    B Select a menu item.

    q
    Using Remote Control

    Using Control panel

    If the Help function does not provide a solution to the problem, see
    "Problem Solving" p.94.



  • Page 94

    Problem Solving
    If you are having a problem with the projector, first check the projector's
    indicators and see "Reading the Indicators".

    94

    A Indicates the operating status.

    If the indicators do not show clearly what the problem might be, see "When
    the Indicators Provide No Help". s p.97

    Standby condition
    When the [t] button is
    pressed in this status,
    projection starts.
    Preparing for network
    monitoring or cool down in
    progress
    Buttons are disabled while
    the indicator is flashing.
    Warming up
    Warm-up time is about 30
    seconds. After warm-up is
    complete, the indicator stops
    flashing.
    Projecting

    Reading the Indicators
    The projector is provided with the following three indicators that indicate
    the status of the projector.

    B Indicates the internal temperature status.
    C Indicates the lamp status.

    See the following table for the status of indicators and how to resolve the
    problems.
    If all indicators are off, the power cable is not connected correctly or the
    power is not being supplied normally.
    Sometimes, when the power cable is unplugged, the [t] indicator remains
    lit for a short period, but this is not a fault.



  • Page 95

    Problem Solving

    95

    t indicator is lit or flashing red

    : Lit
    Status

    Cause

    : Flashing

    : Off

    Remedy or Status

    Internal Error

    Stop using the projector, disconnect the power cable from the electrical outlet, and contact your local dealer or the nearest
    address provided in the Support and Service Guide. s Epson Projector Contact List

    Fan Error
    Sensor Error

    Stop using the projector, disconnect the power cable from the electrical outlet, and contact your local dealer or the nearest
    address provided in the Support and Service Guide. s Epson Projector Contact List

    High Temp Error
    (overheating)

    The lamp turns off automatically and projection stops. Wait for approximately five minutes. After approximately five minutes
    the projector switches to standby mode, so check the following two points.
    • Check that the air filter and air exhaust vent are not blocked, and that the projector is not positioned against a wall.
    • If the air filter is clogged, clean or replace it. s p.108, p.114
    If the error continues after checking the points above, stop using the projector, disconnect the power cable from the electrical
    outlet, and contact your local dealer or the nearest address provided in the Support and Service Guide. s Epson Projector
    Contact List
    When using the projector at an altitude of 1500 m or more, set High Altitude Mode to On. s p.78

    Lamp Error
    Lamp Failure

    Check the following two points.
    • Take out the lamp and check whether it is cracked. s p.111
    • Clean the air filter. s p.108
    If it is not cracked: Reinstall the lamp and turn on the power.
    If the error continues: Replace the lamp with a new one and then turn on the power.
    If the error continues: Stop using the projector, disconnect the power cable from the electrical outlet, and contact your local
    dealer or the nearest address provided in the Support and Service Guide. s Epson Projector Contact List
    If it is cracked: Replace it with a new lamp, or contact your local dealer for further advice. If replacing the lamp yourself, be careful
    to avoid pieces of broken glass (you cannot continue projecting until the lamp is replaced). s Epson Projector Contact List
    When using the projector at an altitude of 1500 m or more, set High Altitude Mode to On. s p.78

    Auto Iris Error
    Power Err. (Ballast)

    Stop using the projector, disconnect the power cable from the electrical outlet, and contact your local dealer or the nearest
    address provided in the Support and Service Guide. s Epson Projector Contact List



  • Page 96

    Problem Solving

    96

    m o indicator is flashing or lit orange

    : Lit
    Status

    q

    Cause

    : Flashing

    : Off

    : Varies according to the projector status

    Remedy or Status

    High Temp Warning

    (This is not an abnormality. However, if the temperature rises too high again, projection stops automatically.)
    • Check that the air filter and air exhaust vent are not blocked, and that the projector is not positioned against a wall.
    • If the air filter is clogged, clean or replace it. s p.108, p.114

    Replace Lamp

    Replace it with a new lamp. s p.111
    If you continue to use the lamp after the replacement period has passed, the possibility that the lamp may blow increases. Replace
    it with a new lamp as soon as possible.

    • If the projector is not operating properly, even though the indicators are all showing normal, refer to "When the Indicators Provide No Help" p.97.
    • If the error is not indicated in this table, stop using the projector, disconnect the power cable from the electrical outlet, and contact your local dealer or the
    nearest address provided in the Support and Service Guide. s Epson Projector Contact List



  • Page 97

    Problem Solving

    When the Indicators Provide No Help
    If any of the following problems occur and the indicators do not offer a
    solution, refer to the pages given for each problem.

    97

    Problems relating to monitoring and control
    "Mail is not received even if an error occurs
    with the projector" s p.102

    Problems relating to images
    • "No images appear" s p.98
    Projection does not start, the projection area is completely black, the
    projection area is completely blue, and so on.
    • "Moving images are not displayed" s p.98
    Moving images played back from a computer appear black and the images
    are not projected.

    Problems relating to Easy Interactive Function
    • "The message "Hardware device not found." is displayed." s p.103
    • "Easy Interactive Pen does not work" s p.103
    • "Flashing dots do not appear even if calibration is started" s p.104

    • "Projection stops automatically" s p.98

    • "The dots do not change from flashing to always lit." s p.104

    • "The message "Not supported" is displayed." s p.99

    • "The dots change from flashing to always lit automatically" s p.104

    • "The message "No Signal" is displayed." s p.99
    • "Images are fuzzy or out of focus" s p.99
    • "Interference or distortion appear in images" s p.100
    Problems such as interference, distortion, or black & white checked patterns
    appear.
    • "The image is truncated (large) or small, or the aspect is not suitable" s p.100
    Only part of the image is displayed, or the height and width ratios of the
    image are not correct, and so on.
    • "Image colors are not right" s p.101
    The whole image appears purplish or greenish, images are black and white,
    colors appear dull, and so on. (Computer monitors and LCD screens have
    different color reproduction performance, so the colors in images projected
    by the projector and the colors appearing on the monitor may not always
    match, but this is not a sign of a problem.)
    • "Images appear dark" s p.101

    Problems when projection starts
    • "The projector does not turn on" s p.102

    Other problems
    • "No sound can be heard or the sound is
    faint" s p.104
    • "No sound can be heard from the
    microphone" s p.105
    • "The remote control does not
    work" s p.105
    • "I want to change the language for messages
    and menus" s p.105



  • Page 98

    Problem Solving

    98

    Problems relating to images
    No images appear
    Check

    Remedy

    Did you press the [t] button?

    Press the [t] button to turn the power on.

    Are all of the indicators off?

    The power cable is not connected correctly or power is not being supplied normally.
    Check that your electrical outlet or power source is functioning correctly.
    If the lamp cover or the lamp are not installed correctly, the lamp does not turn on.
    Check that the lamp cover and lamp are securely installed. s p.111

    Is A/V Mute active?

    Press the [A/V Mute] button on the remote control to cancel A/V Mute. s p.40

    Are the Configuration Menu settings correct?

    Try to reset all of the settings. s Reset Menu - Reset All p.91

    Is the projected image completely black?

    Some input images, such as screen savers, may be completely black.

    Only when projecting computer images

    Is the image signal format setting correct?

    Change the setting according to the signal for the connected equipment. s Signal Menu - Video Signal p.75

    Only when projecting images from a video source

    Moving images are not displayed
    Check
    Is the computer's image signal being output to the LCD and the
    monitor?

    Remedy
    Change the image signal to external output only. s See the documentation supplied with the computer or contact the
    maker of the computer.

    Only when projecting images from a laptop computer or a computer
    with a built-in LCD screen

    Projection stops automatically
    Check
    Is Sleep Mode set to On?

    Remedy
    Press the [t] button to turn the power on. If you do not want to use Sleep Mode, change the setting to Off. s Extended
    Menu - Operation - Sleep Mode p.78



  • Page 99

    Problem Solving

    99

    The message "Not supported" is displayed.
    Check
    Is the image signal format setting correct?

    Remedy
    Change the setting according to the signal for the connected equipment. s Signal Menu - Video Signal p.75

    Only when projecting images from a video source

    Do the image signal resolution and refresh rate correspond to the
    mode?

    See the documentation supplied with the computer for how to change the image signal resolution and refresh rate output
    from the computer. s "List of Supported Resolutions" p.119

    Only when projecting computer images

    The message "No Signal" is displayed.
    Check

    Remedy

    Are the cables connected correctly?

    Check that all the cables required for projection are securely connected. s Quick Start Guide

    Is the correct input port selected?

    Change the image by pressing the [Source Search] button on the remote control or the control panel. s p.21

    Is the power for the computer or video source turned on?

    Turn the power on for the equipment.

    Are the image signals being output to the projector?

    If the image signals are only being output to the computer's LCD monitor or accessory monitor, change the output so
    that the image signals are also output externally. With some computer models, when the image signals are output
    externally, the images no longer appear on the LCD monitor or accessory monitor. s Computer's documentation,
    under a title such as "External output" or "Connecting an external monitor". If the connection is made while the power of
    the projector or computer is already turned on, the function [Fn] key that changes the computer's image signal to
    external output may not work. Turn the power for the computer and the projector off and then back on again.

    Only when projecting images from a laptop computer or a computer
    with a built-in LCD screen

    Images are fuzzy or out of focus
    Check

    Remedy

    Is the focus adjusted correctly?

    Adjust the focus with the focus lever. s Quick Start Guide

    Is the projector at the correct distance?

    Is it projecting outside of the recommended projection distance range?
    Setup within the recommended range. s p.117

    Is the Keystone adjustment value too large?

    Lower the projection angle to reduce the amount of keystone correction. s Quick Start Guide

    Has condensation formed on the lens?

    If the projector is suddenly taken from a cold environment to a warm environment, or if sudden ambient temperature
    changes occur, condensation may form on the surface of the lens, and this may cause the images to appear fuzzy. Set the
    projector up in the room about one hour before it is used. If condensation forms on the lens, turn the projector off and
    wait for the condensation to disappear.



  • Page 100

    Problem Solving

    100

    Check
    Is a wide-panel computer image being projected?

    Remedy
    Change the setting according to the signal for the connected equipment. s Signal menu - Resolution p.75

    Only when projecting computer images

    Is the correct resolution selected?
    Only when projecting computer images

    Set the computer so that the signals being output are compatible with the projector.
    s "List of Supported Resolutions" p.119 s Computer's documentation

    Interference or distortion appear in images
    Check
    Is the image signal format setting correct?

    Remedy
    Change the setting according to the signal for the connected equipment. s Signal Menu - Video Signal p.75

    Only when projecting images from a video source

    Are the cables connected correctly?

    Check that all the cables required for projection are securely connected. s Quick Start Guide

    Is an extension cable being used?

    If an extension cable is used, electrical interference may affect the signals. Use the cables supplied with the projector to
    check if the cables you are using may be causing the problem.

    Is the correct resolution selected?

    Set the computer so that the signals being output are compatible with the projector.
    s "List of Supported Resolutions" p.119 s Computer's documentation

    Only when projecting computer images

    Are the "Sync.g" and "Trackingg" settings adjusted correctly?
    Only when projecting computer images

    Press the [Auto] button on the remote control or the [Enter] button on the control panel to perform automatic
    adjustment. If the images are not adjusted correctly even after performing automatic adjustment, you can also make
    adjustments with Sync. and Tracking in the Configuration Menu. s Signal Menu - Tracking and Sync. p.75

    The image is truncated (large) or small, or the aspect is not suitable
    Check
    Is a wide panel computer image being projected?

    Remedy
    Change the setting according to the signal for the connected equipment. s Signal menu - Resolution p.75

    Only when projecting computer images

    Is the image still enlarged by E-Zoom?

    Press the [Esc] button on the remote control to cancel E-Zoom. s p.47

    Is the display position adjusted correctly?

    Press the [Auto] button on the remote control or the [Enter] button on the control panel to perform automatic
    adjustment while a computer image is being projected. If the images are not adjusted correctly even after performing
    automatic adjustment, you can also make adjustments using Position from the Configuration Menu.
    When projecting signals other than computer image signals, make adjustments with Position in the Configuration
    Menu. s Signal Menu - Position p.75



  • Page 101

    Problem Solving

    101

    Check
    Is the computer set for dual display?
    Only when projecting computer images

    Is the correct resolution selected?
    Only when projecting computer images

    Remedy
    If dual display is activated in "Display Properties" from the computer's Control panel, only approximately half of the
    image on the computer screen is projected. To display the entire image on the computer screen, turn off the dual display
    setting. s Computer's video driver documentation
    Set the computer so that the signals being output are compatible with the projector.
    s "List of Supported Resolutions" p.119 s Computer's documentation

    Image colors are not right
    Check

    Remedy

    Do the input signal settings match the signals from the connected
    device?

    Change the following settings according to the signal for the connected equipment.
    When the image is from equipment connected to the Computer input port s Signal menu - Input Signal p.75
    When the image is from equipment connected to the Video or S-Video input port s Signal menu - Video Signal
    p.75

    Is the image brightness adjusted correctly?

    Adjust Brightness in the Configuration Menu. s Image menu - Brightness p.74

    Are the cables connected correctly?

    Check that all the cables required for projection are securely connected. s Quick Start Guide

    Is Contrastg adjusted correctly?

    Adjust the Contrast in the Configuration Menu. s Image Menu - Contrast p.74

    Is color adjustment set to an appropriate value?

    Adjust Color Adjustment in the Configuration Menu. s Image Menu - Color Adjustment p.74

    Are the color saturation and tint adjusted correctly?

    Adjust Color Saturation and Tint in the Configuration Menu. s Image Menu - Color Saturation and Tint p.74

    Only when projecting images from a video source

    Images appear dark
    Check

    Remedy

    Is the image brightness set correctly?

    Adjust Brightness and Power Consumption from the Configuration Menu.
    s Image Menu - Brightness p.74 s Settings Menu - Power Consumption p.76

    Is the contrastg adjusted correctly?

    Adjust Contrast from the Configuration Menu.
    s Image Menu - Contrast p.74

    Is it time to replace the lamp?

    When the lamp is nearly ready for replacement, the images become darker and the color quality declines. Replace the
    lamp with a new one. s p.111



  • Page 102

    Problem Solving

    102

    Problems when projection starts
    The projector does not turn on
    Check

    Remedy

    Did you press the [t] button?

    Press the [t] button to turn the power on.

    Are all of the indicators off?

    The power cable is not connected correctly or power is not being supplied.
    Disconnect and then reconnect the power cable. s Quick Start Guide
    Check the breaker and so on to ensure power is being supplied.
    If the lamp cover or the lamp are not installed correctly, the lamp will not turn on.
    Check that the lamp cover and lamp are installed properly. s p.111

    Do the indicators turn on and off when the power cable is touched? There is probably a poor contact in the power cable, or the power cable may be defective. Reinsert the power cable. If this
    does not solve the problem, stop using the projector, disconnect the power cable from the electrical outlet, and contact
    your local dealer or the nearest address provided in the Support and Service Guide. s Epson Projector Contact List
    Is Control Panel Lock set to Full Lock?

    Press the [t] button on the remote control. If you do not want to use Control Panel Lock, change the setting to Off.
    s Settings Menu - Control Panel Lock p.52

    Is the correct setting for the remote receiver selected?

    Check the Remote Receiver setting from the Configuration Menu. s Settings Menu - Remote Receiver p.76

    Problems relating to monitoring and control
    Mail is not received even if an error occurs with the projector
    Check
    Is the Wireless LAN unit installed?

    Remedy
    Check that the optional Wireless LAN unit is installed in the projector properly.

    For wireless LAN

    Is the network cable connected correctly?

    Check that the network cable is connected correctly. Reconnect it if it is not connected or not connected properly.

    For wired LAN

    Are the network connection settings correct?

    Check the projector's network settings. s p.80

    Is Standby Mode set to Communication On?

    To use Mail Notification when the projector is in a standby state, set Standby Mode to Communication On from the
    Configuration Menu. s Extended menu - Standby Mode p.78



  • Page 103

    Problem Solving

    103

    Check

    Remedy

    Did a fatal error occur and the projector come to a sudden stop?

    If the projector comes to a sudden stop, mail cannot be sent.
    If, after checking the projector, the error state cannot be resolved, contact your local dealer or the nearest address
    provided in the Support and Service Guide. s Epson Projector Contact List

    Is power being supplied to the projector?

    Check that your electrical outlet or power source is functioning correctly.

    Is Mail Notification set correctly from the Configuration Menu?

    Error notification mail is sent in accordance with the setting of the Mail menu from the Configuration Menu. Check if it
    is set correctly.
    s Network menu - Mail menu p.87

    Problems relating to Easy Interactive Function
    The message "Hardware device not found." is displayed.
    Check

    Remedy

    The projector and computer are not connected correctly.

    Check the USB cable connections. You may be able to resolve the problem by disconnecting and then reconnecting the
    USB cable.

    An antivirus program may be blocking use of the port.

    Disable the antivirus program and then restart Easy Interactive Function.

    Connect the power cable of the computer to an electrical outlet.
    If you are using a notebook computer when the battery power is
    running low, the USB port may stop working and you might not be
    able to use USB devices.

    Easy Interactive Pen does not work
    Check

    Remedy

    An object is blocking the path for sending the signal from the Easy Move the object. Also, make sure you are not blocking the signal path when you stand in front of the projection surface.
    Interactive Pen to the projector.
    There is insufficient battery power.

    Replace the batteries.

    The surroundings are too bright.

    Make sure there is no strong light shining on the projection surface or the Easy Interactive Function receiver.

    The projector and computer are not connected.

    Check that the projector and computer are connected correctly.



  • Page 104

    Problem Solving

    104

    Flashing dots do not appear even if calibration is started
    Check

    Remedy

    The computer screen is being redisplayed.

    End all applications such as Flash animations that redisplay the screen and then restart Easy Interactive Function.

    The dots are not displayed if the projector is not detected by the
    computer.

    Check that the projector and computer are connected correctly and then restart Easy Interactive Function.

    The dots do not change from flashing to always lit.
    Check

    Remedy

    The projector surface information cannot be received accurately
    because there is another light source nearby.

    Move the light source away from the projector or change the installation location of the projector.

    The projector surface information cannot be received accurately if
    the projector position is too close to the projection surface.

    Check the installation position of the projector.

    The dots change from flashing to always lit automatically
    Check

    Remedy

    The Easy Interactive Pen has been disabled because the surrounding Change the installation position of the projector or turn off the light source.
    light source state is unstable.

    Other problems
    No sound can be heard or the sound is faint
    Check

    Remedy

    Is the audio source connected correctly?

    Disconnect the cable from the Audio port, and then reconnect the cable.

    Is the volume adjusted to the minimum setting?

    Adjust the volume so that sound can be heard. s p.76 s Quick Start Guide

    Is A/V Mute active?

    Press the [A/V Mute] button on the remote control to cancel A/V Mute. s p.40

    Is the audio cable's specification "No resistance"?

    When using a commercially available audio cable, make sure it is labeled "No resistance".



  • Page 105

    Problem Solving

    105

    No sound can be heard from the microphone
    Check

    Remedy

    Is the microphone connected correctly?

    Disconnect the cable from the Microphone (Mic) input port, and then reconnect the cable.

    Is the Mic Input Volume turned down too low?

    Adjust the Mic Input Volume so that sound can be heard. s Settings Menu - Mic Input Level p.76

    The remote control does not work
    Check

    Remedy

    Is the remote control light-emitting area pointing towards the
    remote receiver on the projector during operation?

    Point the remote control towards the remote receiver during operation.
    Operating range s Quick Start Guide

    Is the remote control too far from the projector?

    The operating range for the remote control is about 6 m. s Quick Start Guide

    Is direct sunlight or strong light from fluorescent lamps shining onto Set the projector up in a location where strong light does not shine onto the remote receiver. Alternatively, set the remote
    the remote receiver?
    receiver affected by light to Off from Remote Receiver in the Configuration Menu. s Settings Menu - Remote
    Receiver p.76
    Is the remote receiver set correctly?

    Check the Remote Receiver setting from the Configuration Menu. s Settings Menu - Remote Receiver p.76

    Are the batteries dead or have the batteries been inserted in the
    wrong direction?

    Insert new batteries in the correct direction. s p.110

    I want to change the language for messages and menus
    Check
    Change the language setting.

    Remedy
    Change the Language setting from the Configuration Menu. s p.78



  • Page 106

    Reading Error Notification Mail

    106

    When the Mail Notification function is set to On and a problem/warning
    occurs in the projector, the following e-mail will be sent.
    Subject: EPSON Projector
    Line 1: The name of the projector where the problem occurred
    Line 2: The IP Address set for the projector where the problem has
    occurred.
    Line 3 and on: Details of the problem
    The details of the problem are listed line by line. The following table shows
    the details that are given in the message for each item. To deal with
    problems/warnings, see "Reading the Indicators". s p.94
    Message

    Cause

    Internal error

    Internal Error

    Fan related error

    Fan Error

    Sensor error

    Sensor Error

    Lamp timer failure

    Lamp Failure

    Lamp out

    Lamp Error

    Internal temperature error

    High Temp Error
    (Overheating)

    High-speed cooling in progress

    High Temp Warning

    Lamp replacement notification

    Replace Lamp

    No-signal

    No Signal
    No Signal is input to the projector. Check
    the connection status or check that the
    power for the signal source is turned on.

    Auto Iris Error

    Auto Iris Error

    Power Err. (Ballast)

    Power Err. (Ballast)

    A (+) or (-) appears at the start of the message.
    (+): A projector problem has occurred
    (-): A projector problem has been dealt with



  • Page 107

    Appendix
    This chapter provides information on maintenance procedures to ensure the best level of performance from the projector for a long time to come.



  • Page 108

    Cleaning Parts
    Clean the projector if it becomes dirty or if the quality of the projected
    images starts to deteriorate.

    Cleaning the Projector's Surface

    108

    Warning
    Do not use sprays that contain flammable gas to remove dirt and dust from the
    lens. The projector may catch fire because of the high temperature of the lamp
    inside the projector.

    Clean the projector's surface by wiping it gently with a soft cloth.
    If the projector is particularly dirty, moisten the cloth with water containing
    a small amount of neutral detergent, and then firmly wring the cloth dry
    before using it to wipe the projector's surface.

    Attention
    Do not rub the lens with harsh materials or subject the lens to shocks, as it
    can easily become damaged.

    Attention
    Do not use volatile substances such as wax, alcohol, or thinner to clean the
    projector's surface. The quality of the case may change or become discolored.

    Cleaning the Air Filter
    Clean the air filter and the air intake vent when the following message is
    displayed.

    Cleaning the Projection Window
    Use a commercially available cloth for cleaning glasses to gently wipe off
    dirt from the projection window.

    "The projector is overheating. Make sure nothing is blocking the air vent,
    and clean or replace the air filter".

    Attention
    • Dust collecting on the air filter may cause the internal temperature of the
    projector to rise, leading to a malfunction or early deterioration of optical
    parts. If the message is displayed, clean the air filter as soon as possible.
    • Do not rinse the air filter in water. Do not use detergents or solvents.



  • Page 109

    Cleaning Parts

    q

    • If the message is displayed frequently even after cleaning, it is time
    to replace the air filter. Replace it with a new air filter.
    s p.114
    • It is recommended that you clean these parts at least once every
    three months. Clean them more often than this if you are using the
    projector in a particularly dusty environment.

    109



  • Page 110

    Replacing Consumables

    110

    This section explains how to replace the remote control batteries, lamp, and
    air filter.

    Replacing the Remote Control Batteries
    If the remote control becomes unresponsive or inoperable after it has been
    used for some time, the batteries may have reached the end of their service
    life. When this happens, replace them with new batteries. Obtain two AA
    size manganese or alkaline batteries. Batteries other than AA size
    manganese or alkaline batteries cannot be used.

    Caution
    Attention
    Make sure you read the separate Safety Instructions before handling the
    batteries. s Safety Instructions

    Procedure

    A Remove the battery cover.
    While pushing the battery compartment cover catch, lift the cover
    up.

    B Replace the old batteries with new batteries.

    Check the positions of the (+) and (-) marks inside the battery holder to ensure
    the batteries are inserted the correct way.

    C Replace the battery cover.
    Press the battery compartment cover until it clicks into place.



  • Page 111

    Replacing Consumables

    Replacing the Lamp

    111

    Attention
    • The lamp replacement message is set to appear after the following time periods

    Lamp replacement period
    It is time to replace the lamp when:
    • The message "Replace the lamp." is displayed when you start projecting.

    in order to maintain the initial brightness and quality of the projected images.
    s p.76
    When Power Consumption is set to Normal: About 2400 hours
    When Power Consumption is set to ECO: About 3400 hours

    • If you continue to use the lamp after the replacement period has passed, the
    possibility that the lamp may blow increases. When the lamp replacement
    message is displayed, replace the lamp with a new one as soon as possible, even
    if it is still working.

    • Depending on the individual characteristics of the lamp and the way it has
    been used, the lamp may become darker or stop working before the message is
    displayed. We recommend having a spare lamp ready in case it is needed.

    A message is displayed.
    • The lamp indicator flashes orange.

    How to replace the Lamp

    Warning
    • When replacing the lamp because it has stopped working, there is a possibility
    that the lamp may be cracked. If replacing the lamp of a projector which has
    been installed on a wall or ceiling, you should always assume that the lamp is
    broken, and you should stand to the side of the Lamp cover, not underneath it.
    Also, remove the lamp cover gently. There is the risk of small pieces of glass
    falling when you open the lamp cover. If this happens, see a doctor
    immediately.
    • Never disassemble or modify a lamp. If a modified or disassembled lamp is
    installed in the projector and used, it could cause a fire, electric shock, or an
    accident.

    • The projected image gets darker or starts to deteriorate.



  • Page 112

    Replacing Consumables

    112

    Caution
    Wait until the lamp has cooled down sufficiently before removing the lamp cover.
    If the lamp is still hot, burns or other injuries may result. It takes approximately
    one hour after the power has been turned off for the lamp to sufficiently cool
    down.

    Procedure

    A After you turn off the projector's power and the confirmation
    buzzer beeps twice, disconnect the power cable.

    C Loosen the two lamp fixing screws.

    B Wait until the lamp has sufficiently cooled down, and then

    remove the lamp cover at the top of the projector.
    Loosen the lamp cover fixing screw with the screwdriver supplied
    with the new lamp unit or a Phillips (+) screwdriver. Then slide the
    lamp cover straight forward and lift to remove it.

    D Remove the old lamp by pulling the handle.
    If the lamp is cracked, replace it with a new lamp or contact your
    local dealer for further advice. s Epson Projector Contact List



  • Page 113

    Replacing Consumables

    E Install the new lamp.
    Insert the new lamp along the guide rail in the correct direction so
    that it fits in place, push down firmly at the location marked "PUSH",
    and once it is fully inserted tighten the two screws. Press the
    replacement lamp in by the handle until it clicks into place.
    Push the replacement lamp inside the projector by the handle until it
    clicks into place.

    113

    F Attach the lamp cover.



  • Page 114

    Replacing Consumables

    Attention
    • Install the lamp securely. If the lamp cover is removed, the power turns off
    automatically as a safety precaution. If the lamp or the lamp cover is not
    installed correctly, the lamp does not turn on.
    • This product includes a lamp component that contains mercury (Hg). Please
    consult your local regulations regarding disposal or recycling. Do not dispose of
    it with normal waste.

    Resetting the Lamp Hours
    The projector records how long the lamp is on and a message and indicator
    notify you when it is time to replace the lamp. After replacing the lamp,
    reset the time accumulated for Lamp Hours in the Configuration Menu.
    s p.91

    q

    Only reset Lamp Hours after the lamp has been replaced. Otherwise
    the lamp replacement period is not indicated correctly.

    Replacing the Air Filter
    Air filter replacement period
    It is time to replace the air filter when:
    • There is a tear in the air filter.
    • The message is displayed frequently even though the air filter has been
    cleaned.

    114

    How to replace the air filter
    Procedure

    A After you turn off the projector's power and the confirmation
    buzzer beeps twice, disconnect the power cable.

    B Open the air filter cover.
    Slide the air filter cover open/close lever horizontally, and open the
    air filter cover.



  • Page 115

    Replacing Consumables

    C Remove the air filter.
    Grip the tab in the center of the air filter, and pull the air filter
    straight out.

    D Install the new air filter.
    Press until it clicks into place.

    E Close the air filter cover.

    115

    q

    Dispose of used air filters properly in accordance with your local
    regulations.
    Material of the frame part: ABS
    Material of the filter part: Polyurethane foam



  • Page 116

    Optional Accessories and Consumables
    The following optional accessories and consumables are available. Please
    purchase these products as and when needed. The following list of optional
    accessories and consumables is current as of: 2010.01. Details of accessories
    are subject to change without notice and availability may vary depending on
    the country of purchase.

    116

    Consumables
    Lamp unit ELPLP57
    Use as a replacement for a used lamp. s "Replacing the Lamp" p.111

    Air filter ELPAF27
    Use as a replacement for a used air filter. s "Replacing the Air Filter" p.114

    Optional accessories
    Computer cable ELPKC02
    (1.8 m - for mini D-Sub15-pin/mini D-Sub 15pin)
    This is the same as the computer cable supplied with the projector.

    Computer cable ELPKC09
    (3 m - for mini D-Sub15-pin/mini D-Sub 15pin)
    Computer cable ELPKC10
    (20 m - for mini D-Sub15-pin/mini D-Sub 15pin)
    These are extension cables for when the computer cable supplied with the projector is
    too short.

    Component video cable ELPKC19
    (3 m - for mini D-Sub 15-pin/RCA male^3)
    Use to connect a Component Videog source.

    Document Camera ELPDC06
    Use when projecting books, OHP documents, or slides. s "Connecting USB devices"
    p.34

    Wireless LAN unit ELPAP03
    Use when connecting the projector to a computer wirelessly and projecting.
    s "Installing the Wireless LAN Unit" p.38

    Quick Wireless Connection USB Key ELPAP05
    Use this key to connect to a Windows computer and project images from the computer.
    However, the projector needs to be connected to a network before it can be used.



  • Page 117

    Screen Size and Projection Distance

    117

    To find the appropriate screen size, see the following table to setup the
    projector. Values are just reference.
    Projection distance

    16:9 Screen Size

    Minimum (Wide) to Maximum (Tele)

    A

    B

    C

    65"

    144x81

    53 - 71

    25 - 36

    106 - 144

    Height from the bottom edge of the
    projector to the top edge of the screen

    70"

    155x87

    57

    27

    114

    Height from the bottom edge of the
    projector to the bottom edge of the screen

    80"

    177x100

    65

    32

    131

    90"

    199x112

    73

    36

    148

    93"

    206x116

    76

    37

    153

    Unit: cm
    16:10 Screen Size

    Projection Distance (EB-460i/460)
    Units: cm
    4:3 Screen Size

    Minimum (Wide) to Maximum (Tele)

    A

    B

    C

    63"

    128x96

    47 - 63

    9 - 31

    105 - 127

    70"

    142x107

    52 - 71

    11 - 35

    118 - 142

    80"

    163x122

    60

    13

    135

    90"

    183x137

    67

    16

    153

    102"

    207x155

    76

    18

    174

    58"

    128x72

    A

    B

    C

    60"

    129x81

    47 - 64

    18 - 32

    98 - 129

    70"

    151x94

    55 - 75

    21 - 38

    116 - 151

    80"

    172x108

    63

    25

    133

    90"

    194x121

    71

    29

    150

    96"

    207x129

    76

    31

    160

    Projection Distance (EB-450Wi/450W/440W)
    Unit: cm
    16:10 Screen Size

    Minimum (Wide) to Maximum (Tele)

    A

    B

    C

    60"

    129x81

    47 - 64

    18 - 40

    98 - 120

    70"

    151x94

    55 - 75

    21 - 47

    116 - 141

    Minimum (Wide) to Maximum (Tele)

    80"

    172x108

    63

    25

    133

    A

    B

    C

    90"

    194x121

    71

    29

    150

    47 - 64

    21 - 31

    94 - 128

    96"

    207x129

    76

    31

    160

    Unit: cm
    16:9 Screen Size

    Minimum (Wide) to Maximum (Tele)



  • Page 118

    Screen Size and Projection Distance

    118

    Unit: cm
    4:3 Screen Size

    Minimum (Wide) to Maximum (Tele)

    A

    B

    C

    53"

    108x81

    47 - 64

    18 - 40

    98 - 120

    55"

    112x84

    49 - 66

    18 - 41

    102 - 125

    60"

    122x91

    53 - 73

    21 - 46

    112 - 137

    70"

    142x107

    63

    25

    132

    80"

    163x122

    72

    29

    151

    85"

    173x130

    76

    31

    161

    Unit: cm
    16:9 Screen Size

    Minimum (Wide) to Maximum (Tele)

    A

    B

    C

    58"

    128x72

    47 - 64

    21 - 39

    94 - 120

    65"

    144x81

    53 - 71

    25 - 45

    106 - 135

    70"

    155x87

    57

    27

    114

    80"

    177x100

    65

    32

    131

    90"

    199x112

    73

    36

    148

    93"

    206x116

    76

    37

    153



  • Page 119

    List of Supported Resolutions

    119

    Supported Monitor Displays (EB-460i/460)
    Computer signals (analog RGB)

    Component Video
    Signal

    Refresh Rate (Hz)

    Resolution (dots)

    SDTV (480i)

    60

    720x480

    Signal

    Refresh Rate (Hz)

    Resolution (dots)

    SDTV(576i)

    50

    720x576

    VGA

    60/72/75/85

    640x480

    SDTV(480p)

    60

    720x480

    SVGA

    56/60/72/75/85

    800x600

    SDTV(576p)

    50

    720x576

    XGA

    60/70/75/85

    1024x768

    HDTV(720p)

    50/60

    1280x720

    WXGA

    60

    1280x768

    HDTV(1080i)

    50/60

    1920x1080

    60

    1360x768

    60/75/85

    1280x800

    WXGA+

    60/75/85

    1440x900

    SXGA

    70/75/85

    1152x864

    Signal

    Refresh Rate (Hz)

    Resolution (dots)

    60/75/85

    1280x1024

    TV (NTSC)

    60

    720x480

    60/75/85

    1280x960

    TV(PAL, SECAM)

    50/60

    720x576

    SXGA+

    60/75

    1400x1050

    UXGA

    60

    1600x1200

    MAC13"

    67

    640x480

    MAC16"

    75

    832x624

    MAC19"

    75

    1024x768

    59

    1024x768

    75

    1152x870

    MAC21"

    Images may also be projected when signals other than the above are input.
    However, some functions may be limited.

    Composite Video/S-Video

    Supported Monitor Displays (EB-450Wi/450W/
    440W)
    Computer signals (analog RGB)
    Signal

    Refresh Rate (Hz)

    Resolution (dots)

    VGA

    60/72/75/85

    640x480

    SVGA

    56/60/72/75/85

    800x600

    XGA

    60/70/75/85

    1024x768

    WXGA

    60

    1280x768

    60

    1360x768

    60/75/85

    1280x800



  • Page 120

    List of Supported Resolutions

    120

    Signal

    Refresh Rate (Hz)

    Resolution (dots)

    WXGA+

    60/75/85

    1440x900

    WSXGA+*

    60

    1680x1050

    SXGA

    70/75/85

    1152x864

    60/75/85

    1280x1024

    60/75/85

    1280x960

    SXGA+

    60/75

    1400x1050

    UXGA

    60

    1600x1200

    MAC13”

    67

    640x480

    MAC16”

    75

    832x624

    MAC19”

    75

    1024x768

    59

    1024x768

    75

    1152x870

    MAC21”

    * Only compatible when Wide is selected as the Resolution from the
    Configuration Menu. s p.75
    Images may also be projected when signals other than the above are input.
    However, some functions may be limited.

    Component Video
    Signal

    Refresh Rate (Hz)

    Resolution (dots)

    SDTV(480i)

    60

    720x480

    SDTV(576i)

    50

    720x576

    SDTV(480p)

    60

    720x480

    SDTV(576p)

    50

    720x576

    HDTV(720p)

    50/60

    1280x720

    HDTV(1080i)

    50/60

    1920x1080

    Composite Video/S-Video
    Signal

    Refresh Rate (Hz)

    Resolution (dots)

    TV(NTSC)

    60

    720x480

    TV(PAL, SECAM)

    50/60

    720x576



  • Page 121

    ESC/VP21 Commands

    121

    Item

    Command List

    Logo

    When the power ON command is transmitted to the projector, the power
    turns on and it enters warm-up mode. When the projector's power has
    turned on, a colon ":" (3Ah) is returned.
    When a command is input, the projector executes the command and
    returns a ":", and then accepts the next command.
    If the command being processed terminates abnormally, an error message is
    output and a ":" is returned.
    Item
    Power ON/OFF
    Signal selection

    On

    PWR ON

    Off

    PWR OFF

    Computer1

    Computer2

    A/V Mute On/Off
    A/V Mute selection

    Command

    Auto

    SOURCE 1F

    RGB

    SOURCE 11

    Component

    SOURCE 14

    Auto

    SOURCE 2F

    RGB

    SOURCE 21

    Component

    SOURCE 24

    Video

    SOURCE 41

    S-Video

    SOURCE 42

    USB Display

    SOURCE 51

    USB

    SOURCE 52

    LAN

    SOURCE 53

    On

    MUTE ON

    Off

    MUTE OFF

    Black

    MSEL 00

    Blue

    MSEL 01

    Command
    MSEL 02

    Add a Carriage Return (CR) code (0Dh) to the end of each command and
    transmit.



  • Page 122

    ESC/VP21 Commands

    122






    Cable Layouts
    Serial Connection
    • Connector shape: D-Sub 9-pin (male)
    • Projector input port name: RS-232C
    <At the projector>

    <At the computer>

    <At the projector>

    Signal Name

    (PC serial cable)

    Function

    GND

    Signal wire ground

    TD

    Transmit data

    RD

    Receive data

    Communications protocol
    • Default baud rate setting: 9600 bps

    <At the computer>

    Data length: 8 bit
    Parity: None
    Stop-bit: 1 bit
    Flow control: None



  • Page 123

    About PJLink

    123

    PJLink Class1 was established by the JBMIA (Japan Business Machine and
    Information System Industries Association) as a standard protocol for
    controlling network-compatible projector's as part of their efforts to
    standardize projector control protocols.
    The projector complies with the PJLink Class1 standard established by the
    JBMIA.
    It complies with all commands except for the following commands defined
    by PJLink Class1, and agreement was confirmed by the PJLink standard
    adaptability verification.
    URL:http://pjlink.jbmia.or.jp/english/
    • Non-compatible commands
    Function
    Mute settings

    PJLink Command

    Image muting set

    AVMT 11

    Audio muting set

    AVMT 21

    • Input names defined by PJLink and corresponding projector sources
    Source

    PJLink Command

    Computer1

    INPT 11

    Computer2

    INPT 12

    Video

    INPT 21

    S-Video

    INPT 22

    USB

    INPT 41

    LAN

    INPT 52

    USB Display

    INPT 53

    • Manufacturer name displayed for "Manufacture name information query"
    EPSON

    • Model name displayed for "Product name information query"
    EB-460i
    EB-460
    EB-450Wi
    EB-450W
    EB-440W



  • Page 124

    Specifications

    124

    Projector General Specifications
    EB-460i

    Product name

    EB-460

    EB-450Wi

    EB-450W

    369 (W) ^ 155 (H) ^ 483 (D) mm

    Dimensions
    0.63"

    Panel size

    0.59" Wide
    Polysilicon TFT active matrix

    Display method
    786,432
    XGA (1024 (W) ^ 768 (H) dots) ^ 3

    Resolution

    1,024,000 pixels
    WXGA (1280 (W) ^ 800 (H) dots) ^ 3

    Focus adjustment

    Manual

    Zoom adjustment

    Digital (1-1.35)
    UHE lamp, 230 W, Model No.: ELPLP57

    Lamp

    10 W monaural

    Max. audio output

    1

    Speaker

    100 to 240 V AC ±10%, 50/60 Hz 3.7 to 1.6 A

    Power supply
    Power con‐
    sumption

    100 to 120 V area

    Standby power consumption (Communication On): 10.0 W
    Standby power consumption (Communication Off): 0.3 W

    220 to 240 V area

    Standby power consumption (Communication On): 12.0 W
    Standby power consumption (Communication Off): 0.3 W
    Altitude 0 to 2,286 m

    Operating altitude
    Operating temperature

    +5 to +35˚C (No condensation)

    Storage temperature

    -10 to +60˚C (No condensation)

    Mass

    EB-440W

    Without Slide Plate

    Approx. 5.8 kg

    Approx. 5.7 kg

    Approx. 5.8 kg

    Approx. 5.7 kg

    With Slide Plate

    Approx. 6.3 kg

    Approx. 6.2 kg

    Approx. 6.3 kg

    Approx. 6.2 kg



  • Page 125

    Specifications

    Connectors

    125

    Computer1 input port

    1

    Mini D-Sub 15-pin (female) blue

    Computer2 input port

    1

    Mini D-Sub 15-pin (female) blue

    Audio1 port

    1

    Stereo mini jack

    Audio2 port

    1

    Stereo mini jack

    Video input port

    1

    RCA pin jack

    S-Video input port

    1

    Mini DIN 4-pin

    Audio-L/R input port

    1

    RCA pin jack x 2 (L, R)

    Microphone (Mic) input
    port

    1

    Stereo mini jack

    Audio Output (Audio
    Out) port

    1

    Stereo mini jack

    Monitor Output
    (Monitor Out) port

    1

    Mini D-Sub 15-pin (female) black

    USB(TypeA) port *
    USB(TypeB) port *

    1

    USB connector (Type A)
    USB connector (Type B)

    USB port

    1

    USB Connector (Type A) for Optional Wireless LAN Unit

    LAN port

    1

    RJ-45

    RS-232C port

    1

    Mini D-Sub 9-pin (male)

    * Supports USB 2.0. However, the operation of all USB compatible devices is not guaranteed.



  • Page 126

    Specifications

    126

    This product is also designed for IT power distribution system with phase-to-phase voltage 230V.
    Pixelworks DNX

    ™ ICs are used in this projector.

    Angle of tilt

    If you use the projector tilted at an angle of more than 5˚ it could be damaged and cause an accident.



  • Page 127

    Specifications

    127

    (for Projector only)

    (for Projector and Easy Interactive Pen)

    DECLARATION of CONFORMITY
    According to 47CFR, Part 2 and 15
    Class B Personal Computers and Peripherals; and/or
    CPU Boards and Power Supplies used with Class B Personal Computers
    We:
    Located at:

    Epson America, Inc.
    3840 Kilroy Airport Way
    MS: 3-13
    Long Beach, CA 90806

    Tel:

    562-290-5254

    Declare under sole responsibility that the product identified herein,
    complies with 47CFR Part 2 and 15 of the FCC rules as a Class B digital
    device. Each product marketed, is identical to the representative unit tested
    and found to be compliant with the standards. Records maintained continue
    to reflect the equipment being produced can be expected to be within the
    variation accepted, due to quantity production and testing on a statistical
    basis as required by 47CFR 2.909. Operation is subject to the following two
    conditions : (1) this device may not cause harmful interference, and (2) this
    device must accept any interference received, including interference that
    may cause undesired operation.
    Trade Name:

    EPSON

    Type of Product:

    LCD Projector

    Model:

    H317C/H318C/H342C

    FCC Compliance Statement
    For United States Users

    This equipment has been tested and found to comply with the limits for a
    Class B digital device, pursuant to Part 15 of the FCC Rules. These limits
    are designed to provide reasonable protection against harmful interference
    in a residential installation. This equipment generates, uses, and can radiate
    radio frequency energy and, if not installed and used in accordance with the
    instructions, may cause harmful interference to radio or television
    reception. However, there is no guarantee that interference will not occur in
    a particular installation. If this equipment does cause interference to radio
    and television reception, which can be determined by turning the
    equipment off and on, the user is encouraged to try to correct the
    interference by one or more of the following measures.
    • Reorient or relocate the receiving antenna.
    • Increase the separation between the equipment and receiver.
    • Connect the equipment into an outlet on a circuit different from that to
    which the receiver is connected.
    • Consult the dealer or an experienced radio/TV technician for help.
    WARNING

    The connection of a non-shielded equipment interface cable to this
    equipment will invalidate the FCC Certification or Declaration of this
    device and may cause interference levels which exceed the limits established
    by the FCC for this equipment. It is the responsibility of the user to obtain
    and use a shielded equipment interface cable with this device. If this
    equipment has more than one interface connector, do not leave cables
    connected to unused interfaces. Changes or modifications not expressly
    approved by the manufacturer could void the user's authority to operate the
    equipment.



  • Page 128

    Specifications

    128

    (for Easy Interactive Pen only)
    Since the Easy Interactive Pen is so small, FCC Statement for Verification is
    written in the manual.
    FCC Statement for Verification

    This device complies with Part 15 of the FCC Rules. Operation is subject to
    the following two conditions:(1) this device may not cause harmful
    interference, and (2) this device must accept any interference received,
    including interference that may cause undesired operation.



  • Page 129

    Appearance

    A Distance until projection center

    129



  • Page 130

    Appearance

    With Slide Plate

    130

    Without Slide Plate

    Units: mm



  • Page 131

    Glossary

    131

    This section explains easily terms that are used with the projector and difficult terms that are not explained in the text of this guide. For details, refer to other
    commercially available publications.
    AMX Device Discovery

    AMX Device Discovery is a technology developed by AMX to facilitate AMX control systems for easy operation of the target equipment.
    Epson have implemented this protocol technology, and have provided a setting to enable the protocol function (ON).
    See the AMX Web site for more details.
    URL http://www.amx.com/

    Aspect Ratio

    The ratio between an image's length and its height. HDTV images have an aspect ratio of 16:9 and appear elongated. The aspect ratio for standard
    images is 4:3.

    (Aspect Ratio)

    Component Video

    A Video signal which has the luminance component and color component separated to provide better image quality.
    Refers to images that consist of three independent signals: Y (luminance signal), Pb and Pr (color difference signals).

    Composite video

    Video signals that have the video brightness signals and color signals mixed together. The type of signals commonly used by household video
    equipment (NTSC, PAL, and SECAM formats). The carrier signal Y (luminance signal) and chroma (color) signal that are contained in the color bar
    are overlapped to form a single signal.

    Contrast

    The relative brightness of the light and dark areas of an image can be increased or decreased to make text and graphics stand out more clearly, or to
    make them appear softer. Adjusting this particular property of an image is called Contrast adjustment.

    DHCP

    An abbreviation of Dynamic Host Configuration Protocol, this protocol automatically assigns an IP Addressg to equipment connected to a
    Network.

    Dolby Digital

    A sound format developed by Dolby Laboratories. Normal stereo is a 2-channel format that uses two speakers. Dolby Digital is a 6-channel (5.1channel) system which adds to this a center speaker, two rear speakers, and a sub-woofer.

    Gateway address

    This is a server (router) for communicating across a Network (subnet) divided according to Subnet Maskg.

    (Gateway address)

    HDTV

    An abbreviation for High-Definition Television that refers to high-definition systems which satisfy the following conditions.
    • Vertical resolution of 720p or 1080i or greater (p = Progressiveg, i = Interlaceg)
    • Screen Aspect Ratiog of 16:9
    • Dolby Digitalg audio reception and playback (or output)

    Interlace

    A method of image scanning whereby the image data is divided into fine horizontal lines that are displayed in sequence starting from left to right and
    then from top to bottom. The even-numbered lines and odd-numbered lines are displayed alternately.

    IP Address

    A number to identify a computer connected to a Network.

    Progressive

    A method of image scanning whereby the image data from a single image is scanned sequentially from top to bottom to create a single image.

    Refresh Rate

    The light-emitting element of a display maintains the same luminosity and color for an extremely short time. Because of this, the image must be
    scanned many times per second to refresh the light-emitting element. The number of refresh operations per second is called the Refresh Rate and is
    expressed in hertz (Hz).



  • Page 132

    Glossary

    132

    SDTV

    An abbreviation for Standard Definition Television that refers to standard television systems which do not satisfy the conditions for HDTVg HighDefinition Television.

    SNMP

    An abbreviation for Simple Network Management Protocol, which is the protocol for monitoring and controlling devices such as routers and
    computers connected to a TCP/IP Network.

    sRGB

    An international standard for color intervals that was formulated so that colors that are reproduced by video equipment can be handled easily by
    computer operating systems (OS) and the Internet. If the connected source has an sRGB mode, set both the projector and the connected signal source
    to sRGB.

    SSID

    SSID is identification data for connecting to another device on a Wireless LAN. Wireless communication is possible between devices with matching
    SSID.

    Subnet mask
    (Subnet mask)

    This is a numerical value that defines the number of bits used for the Network address on a divided network (subnet) from the IP Address.

    SVGA

    A type of video signal with a resolution of 800 (horizontal) ^ 600 (vertical) dots that is used by IBM PC/AT-compatible computers.

    S-Video

    A Video signal which has the luminance component and color component separated to provide better image quality.
    Refers to images that consist of two independent signals: Y (luminance signal) and C (color signal).

    SXGA

    A type of video signal with a resolution of 1,280 (horizontal) ^ 1,024 (vertical) dots that is used by IBM PC/AT-compatible computers.

    Sync.

    The signals output from computers have a specific frequency. If the projector frequency does not match this frequency, the resulting images are not of
    a good quality. The process of matching the phases of these signals (the relative position of the crests and the troughs in the signal) is called
    Synchronization. If the signals are not synchronized, flickering, blurriness, and horizontal interference occur.

    Tracking

    The signals output from computers have a specific frequency. If the projector frequency does not match this frequency, the resulting images are not of
    a good quality. The process of matching the frequency of these signals (the number of crests in the signal) is called Tracking. If Tracking is not carried
    out correctly, wide vertical stripes appear in the signal.

    Trap IP Address

    This is the IP Addressg for the destination computer used for error notification in SNMP.

    VGA

    A type of video signal with a resolution of 640 (horizontal) ^ 480 (vertical) dots that is used by IBM PC/AT-compatible computers.

    WPS

    WPS is an abbreviation of Wi-Fi Protected Setup. Wi-Fi Protected Setup has been devised by the Wi-Fi Alliance as a means of easily setting up and
    securing a Wireless LAN.

    XGA

    A type of video signal with a resolution of 1,024 (horizontal) ^ 768 (vertical) dots that is used by IBM PC/AT-compatible computers.



  • Page 133

    General Notes
    All rights reserved. No part of this publication may be reproduced, stored in a retrieval
    system, or transmitted in any form or by any means, electronic, mechanical,
    photocopying, recording, or otherwise, without the prior written permission of Seiko
    Epson Corporation. No patent liability is assumed with respect to the use of the
    information contained herein. Neither is any liability assumed for damages resulting
    from the use of the information contained herein.
    Neither Seiko Epson Corporation nor its affiliates shall be liable to the purchaser of this
    product or third parties for damages, losses, costs, or expenses incurred by the
    purchaser or third parties as a result of: accident, misuse, or abuse of this product or
    unauthorized modifications, repairs, or alterations to this product, or (excluding the
    U.S.) failure to strictly comply with Seiko Epson Corporation's operating and
    maintenance instructions.
    Seiko Epson Corporation shall not be liable against any damages or problems arising
    from the use of any options or any consumable products other than those designated as
    Original Epson Products or Epson Approved Products by Seiko Epson Corporation.
    The contents of this guide may be changed or updated without further notice.
    Illustrations in this guide and the actual projector may differ.

    Wireless Telegraphy Act Regulations
    The following acts are prohibited by the Wireless Telegraphy Act.
    • Modifying and disassembling (including the antenna)
    • Removing the label of conformance
    • IEEE 802.11a (50 Hz band) external use

    133

    XP Home Edition operating system
    ® Windows
    ®
    Vista operating system
    ® Windows
    ®
    Windows 7 operating system
    ®
    ®

    Microsoft
    Microsoft
    Microsoft

    In this guide, the operating systems above are referred to as "Windows
    2000", "Windows XP", "Windows Vista", and "Windows 7". Furthermore,
    the collective term Windows may be used to refer to Windows 2000,
    Windows XP, Windows Vista, and Windows 7, and multiple versions of
    Windows may be referred to as, for example, Windows 2000/XP/Vista, with
    the Windows notation omitted.
    Mac
    Mac
    Mac
    Mac

    OS
    OS
    OS
    OS

    Microsoft
    Microsoft

    ® Windows
    ® 2000 operating system
    Windows XP Professional operating system
    ®
    ®

    10.3.x
    10.4.x
    10.5.x
    10.6.x

    In this guide, the operating systems above are referred to as "Mac OS X
    10.3.9", "Mac OS X 10.4.x", "Mac OS X 10.5.x", and "Mac OS X 10.6.x".
    Furthermore, the collective term "Mac OS" is used to refer to them.

    General Notice
    IBM, DOS/V, and XGA are trademarks or registered trademarks of International
    Business Machines Corporation.
    Macintosh, Mac, and iMac are registered trademarks of Apple Inc.
    Microsoft, Windows, Windows NT, Windows Vista, Windows 7, PowerPoint, and
    Windows logo are trademarks or registered trademarks of Microsoft Corporation in the
    United States and/or other countries.
    Pixelworks and DNX are trademarks of Pixelworks Inc.
    WPA and WPA2 are registered trademarks of Wi-Fi Allience.
    PJLink trademark is a trademark applied for registration or is already registered in
    Japan, the United States of America and other countries and areas.
    Other product names used herein are also for identification purposes only and may be
    trademarks of their respective owners. Epson disclaims any and all rights in those
    marks.



    About Notations

    X
    X
    X
    X





  • Page 134

    General Notes

    ©SEIKO EPSON CORPORATION 2010. All rights reserved.

    134

    GNU GPL
    This projector product includes the open source software programs which apply
    the GNU General Public License Version 2 or later version ("GPL Programs").
    We provide the source code of the GPL Programs until five (5) years after the
    discontinuation of same model of this projector product.
    If you desire to receive the source code of the GPL Programs, please see the
    "EPSON Projector Contact List" in the User's Guide, and contact the customer
    support of your region.
    These GPL Programs are WITHOUT ANY WARRANTY; without even the
    implied warranty of MERCHANTABILITY AND FITNESS FOR A
    PARTICULAR PURPOSE. See the GNU General Public License for more details.
    The list of GPL Programs is as follows and the names of author are described in the
    source code of the GPL Programs
    The list of GPL Programs
    busybox-1.7.2
    libgcc1(gcc-4.2.3)
    linux-2.6.20
    patches
    udhcp 0.9.8
    uvc rev.219
    wireless_tools 29
    Pixelworks PWC950 SDK drivers
    The GNU General Public License Version 2 is as follows. You also can see the GNU
    General Public License Version 2 at http://www.gnu.org/licenses/.
    GNU GENERAL PUBLIC LICENSE
    Version 2, June 1991
    Copyright (C) 1989, 1991 Free Software Foundation, Inc., 51 Franklin Street, Fifth
    Floor, Boston, MA 02110-1301 USA Everyone is permitted to copy and distribute
    verbatim copies of this license document, but changing it is not allowed.
    Preamble



  • Page 135

    General Notes

    The licenses for most software are designed to take away your freedom to share and
    change it. By contrast, the GNU General Public License is intended to guarantee your
    freedom to share and change free software--to make sure the software is free for all its
    users. This General Public License applies to most of the Free Software Foundation's
    software and to any other program whose authors commit to using it. (Some other Free
    Software Foundation software is covered by the GNU Lesser General Public License
    instead.) You can apply it to your programs, too.
    When we speak of free software, we are referring to freedom, not price. Our General
    Public Licenses are designed to make sure that you have the freedom to distribute copies
    of free software (and charge for this service if you wish), that you receive source code or
    can get it if you want it, that you can change the software or use pieces of it in new free
    programs; and that you know you can do these things.
    To protect your rights, we need to make restrictions that forbid anyone to deny you
    these rights or to ask you to surrender the rights. These restrictions translate to certain
    responsibilities for you if you distribute copies of the software, or if you modify it.
    For example, if you distribute copies of such a program, whether gratis or for a fee, you
    must give the recipients all the rights that you have. You must make sure that they, too,
    receive or can get the source code. And you must show them these terms so they know
    their rights.
    We protect your rights with two steps: (1) copyright the software, and (2) offer you this
    license which gives you legal permission to copy, distribute and/or modify the software.
    Also, for each author's protection and ours, we want to make certain that everyone
    understands that there is no warranty for this free software. If the software is modified
    by someone else and passed on, we want its recipients to know that what they have is not
    the original, so that any problems introduced by others will not reflect on the original
    authors' reputations.
    Finally, any free program is threatened constantly by software patents. We wish to avoid
    the danger that redistributors of a free program will individually obtain patent licenses,
    in effect making the program proprietary. To prevent this, we have made it clear that any
    patent must be licensed for everyone's free use or not licensed at all.
    The precise terms and conditions for copying, distribution and modification follow.

    135

    GNU GENERAL PUBLIC LICENSE TERMS AND CONDITIONS FOR COPYING,
    DISTRIBUTION AND MODIFICATION
    0. This License applies to any program or other work which contains a notice placed
    by the copyright holder saying it may be distributed under the terms of this
    General Public License. The "Program", below, refers to any such program or
    work, and a "work based on the Program" means either the Program or any
    derivative work under copyright law: that is to say, a work containing the Program
    or a portion of it, either verbatim or with modifications and/or translated into
    another language. (Hereinafter, translation is included without limitation in the
    term "modification".) Each licensee is addressed as "you".
    Activities other than copying, distribution and modification are not covered by
    this License; they are outside its scope. The act of running the Program is not
    restricted, and the output from the Program is covered only if its contents
    constitute a work based on the Program (independent of having been made by
    running the Program). Whether that is true depends on what the Program does.
    1. You may copy and distribute verbatim copies of the Program's source code as you
    receive it, in any medium, provided that you conspicuously and appropriately
    publish on each copy an appropriate copyright notice and disclaimer of warranty;
    keep intact all the notices that refer to this License and to the absence of any
    warranty; and give any other recipients of the Program a copy of this License along
    with the Program.
    You may charge a fee for the physical act of transferring a copy, and you may at
    your option offer warranty protection in exchange for a fee.
    2. You may modify your copy or copies of the Program or any portion of it, thus
    forming a work based on the Program, and copy and distribute such modifications
    or work under the terms of Section 1 above, provided that you also meet all of these
    conditions:
    a) You must cause the modified files to carry prominent notices stating that you
    changed the files and the date of any change.
    b) You must cause any work that you distribute or publish, that in whole or in
    part contains or is derived from the Program or any part thereof, to be
    licensed as a whole at no charge to all third parties under the terms of this
    License.



  • Page 136

    General Notes

    c)

    c)

    3.

    If the modified program normally reads commands interactively when run,
    you must cause it, when started running for such interactive use in the most
    ordinary way, to print or display an announcement including an appropriate
    copyright notice and a notice that there is no warranty (or else, saying that
    you provide a warranty) and that users may redistribute the program under
    these conditions, and telling the user how to view a copy of this License.
    (Exception: if the Program itself is interactive but does not normally print
    such an announcement, your work based on the Program is not required to
    print an announcement.)
    These requirements apply to the modified work as a whole. If identifiable sections
    of that work are not derived from the Program, and can be reasonably considered
    independent and separate works in themselves, then this License, and its terms, do
    not apply to those sections when you distribute them as separate works. But when
    you distribute the same sections as part of a whole which is a work based on the
    Program, the distribution of the whole must be on the terms of this License, whose
    permissions for other licensees extend to the entire whole, and thus to each and
    every part regardless of who wrote it.
    Thus, it is not the intent of this section to claim rights or contest your rights to work
    written entirely by you; rather, the intent is to exercise the right to control the
    distribution of derivative or collective works based on the Program.
    In addition, mere aggregation of another work not based on the Program with the
    Program (or with a work based on the Program) on a volume of a storage or
    distribution medium does not bring the other work under the scope of this
    License.
    You may copy and distribute the Program (or a work based on it, under Section 2)
    in object code or executable form under the terms of Sections 1 and 2 above
    provided that you also do one of the following:
    a) Accompany it with the complete corresponding machine-readable source
    code, which must be distributed under the terms of Sections 1 and 2 above on
    a medium customarily used for software interchange; or,
    b) Accompany it with a written offer, valid for at least three years, to give any
    third party, for a charge no more than your cost of physically performing
    source distribution, a complete machine-readable copy of the corresponding
    source code, to be distributed under the terms of Sections 1 and 2 above on a
    medium customarily used for software interchange; or,

    136

    4.

    5.

    6.

    Accompany it with the information you received as to the offer to distribute
    corresponding source code. (This alternative is allowed only for
    noncommercial distribution and only if you received the program in object
    code or executable form with such an offer, in accord with Subsection b
    above.)
    The source code for a work means the preferred form of the work for making
    modifications to it. For an executable work, complete source code means all the
    source code for all modules it contains, plus any associated interface definition
    files, plus the scripts used to control compilation and installation of the executable.
    However, as a special exception, the source code distributed need not include
    anything that is normally distributed (in either source or binary form) with the
    major components (compiler, kernel, and so on) of the operating system on which
    the executable runs, unless that component itself accompanies the executable.
    If distribution of executable or object code is made by offering access to copy from
    a designated place, then offering equivalent access to copy the source code from
    the same place counts as distribution of the source code, even though third parties
    are not compelled to copy the source along with the object code.
    You may not copy, modify, sublicense, or distribute the Program except as
    expressly provided under this License. Any attempt otherwise to copy, modify,
    sublicense or distribute the Program is void, and will automatically terminate your
    rights under this License. However, parties who have received copies, or rights,
    from you under this License will not have their licenses terminated so long as such
    parties remain in full compliance.
    You are not required to accept this License, since you have not signed it. However,
    nothing else grants you permission to modify or distribute the Program or its
    derivative works. These actions are prohibited by law if you do not accept this
    License. Therefore, by modifying or distributing the Program (or any work based
    on the Program), you indicate your acceptance of this License to do so, and all its
    terms and conditions for copying, distributing or modifying the Program or works
    based on it.
    Each time you redistribute the Program (or any work based on the Program), the
    recipient automatically receives a license from the original licensor to copy,
    distribute or modify the Program subject to these terms and conditions. You may
    not impose any further restrictions on the recipients' exercise of the rights granted
    herein. You are not responsible for enforcing compliance by third parties to this
    License.



  • Page 137

    General Notes

    7.

    8.

    9.

    If, as a consequence of a court judgment or allegation of patent infringement or for
    any other reason (not limited to patent issues), conditions are imposed on you
    (whether by court order, agreement or otherwise) that contradict the conditions of
    this License, they do not excuse you from the conditions of this License. If you
    cannot distribute so as to satisfy simultaneously your obligations under this
    License and any other pertinent obligations, then as a consequence you may not
    distribute the Program at all. For example, if a patent license would not permit
    royalty-free redistribution of the Program by all those who receive copies directly
    or indirectly through you, then the only way you could satisfy both it and this
    License would be to refrain entirely from distribution of the Program.
    If any portion of this section is held invalid or unenforceable under any particular
    circumstance, the balance of the section is intended to apply and the section as a
    whole is intended to apply in other circumstances.
    It is not the purpose of this section to induce you to infringe any patents or other
    property right claims or to contest validity of any such claims; this section has the
    sole purpose of protecting the integrity of the free software distribution system,
    which is implemented by public license practices. Many people have made
    generous contributions to the wide range of software distributed through that
    system in reliance on consistent application of that system; it is up to the author/
    donor to decide if he or she is willing to distribute software through any other
    system and a licensee cannot impose that choice.
    This section is intended to make thoroughly clear what is believed to be a
    consequence of the rest of this License.
    If the distribution and/or use of the Program is restricted in certain countries
    either by patents or by copyrighted interfaces, the original copyright holder who
    places the Program under this License may add an explicit geographical
    distribution limitation excluding those countries, so that distribution is permitted
    only in or among countries not thus excluded. In such case, this License
    incorporates the limitation as if written in the body of this License.
    The Free Software Foundation may publish revised and/or new versions of the
    General Public License from time to time. Such new versions will be similar in
    spirit to the present version, but may differ in detail to address new problems or
    concerns.

    137

    Each version is given a distinguishing version number. If the Program specifies a
    version number of this License which applies to it and "any later version", you have
    the option of following the terms and conditions either of that version or of any
    later version published by the Free Software Foundation. If the Program does not
    specify a version number of this License, you may choose any version ever
    published by the Free Software Foundation.
    10. If you wish to incorporate parts of the Program into other free programs whose
    distribution conditions are different, write to the author to ask for permission. For
    software which is copyrighted by the Free Software Foundation, write to the Free
    Software Foundation; we sometimes make exceptions for this. Our decision will be
    guided by the two goals of preserving the free status of all derivatives of our free
    software and of promoting the sharing and reuse of software generally.

    11.

    12.

    NO WARRANTY
    BECAUSE THE PROGRAM IS LICENSED FREE OF CHARGE, THERE IS NO
    WARRANTY FOR THE PROGRAM, TO THE EXTENT PERMITTED BY
    APPLICABLE LAW. EXCEPT WHEN OTHERWISE STATED IN WRITING
    THE COPYRIGHT HOLDERS AND/OR OTHER PARTIES PROVIDE THE
    PROGRAM "AS IS" WITHOUT WARRANTY OF ANY KIND, EITHER
    EXPRESSED OR IMPLIED, INCLUDING, BUT NOT LIMITED TO, THE
    IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A
    PARTICULAR PURPOSE. THE ENTIRE RISK AS TO THE QUALITY AND
    PERFORMANCE OF THE PROGRAM IS WITH YOU. SHOULD THE
    PROGRAM PROVE DEFECTIVE, YOU ASSUME THE COST OF ALL
    NECESSARY SERVICING, REPAIR OR CORRECTION.
    IN NO EVENT UNLESS REQUIRED BY APPLICABLE LAW OR AGREED TO
    IN WRITING WILL ANY COPYRIGHT HOLDER, OR ANY OTHER PARTY
    WHO MAY MODIFY AND/OR REDISTRIBUTE THE PROGRAM AS
    PERMITTED ABOVE, BE LIABLE TO YOU FOR DAMAGES, INCLUDING
    ANY GENERAL, SPECIAL, INCIDENTAL OR CONSEQUENTIAL DAMAGES
    ARISING OUT OF THE USE OR INABILITY TO USE THE PROGRAM
    (INCLUDING BUT NOT LIMITED TO LOSS OF DATA OR DATA BEING
    RENDERED INACCURATE OR LOSSES SUSTAINED BY YOU OR THIRD
    PARTIES OR A FAILURE OF THE PROGRAM TO OPERATE WITH ANY
    OTHER PROGRAMS), EVEN IF SUCH HOLDER OR OTHER PARTY HAS
    BEEN ADVISED OF THE POSSIBILITY OF SUCH DAMAGES.



  • Page 138

    General Notes

    END OF TERMS AND CONDITIONS
    How to Apply These Terms to Your New Programs
    If you develop a new program, and you want it to be of the greatest possible use to the
    public, the best way to achieve this is to make it free software which everyone can
    redistribute and change under these terms.
    To do so, attach the following notices to the program. It is safest to attach them to the
    start of each source file to most effectively convey the exclusion of warranty; and each file
    should have at least the "copyright" line and a pointer to where the full notice is found.
    <one line to give the program's name and a brief idea of what it does.>
    Copyright (C) <year> <name of author>
    This program is free software; you can redistribute it and/or modify it under the
    terms of the GNU General Public License as published by the Free Software
    Foundation; either version 2 of the License, or (at your option) any later version.
    This program is distributed in the hope that it will be useful, but WITHOUT ANY
    WARRANTY; without even the implied warranty of MERCHANTABILITY or
    FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License
    for more details.
    You should have received a copy of the GNU General Public License along with this
    program; if not, write to the Free Software Foundation, Inc., 51 Franklin Street,
    Fifth Floor, Boston, MA 02110-1301 USA.
    Also add information on how to contact you by electronic and paper mail.
    If the program is interactive, make it output a short notice like this when it starts in an
    interactive mode:
    Gnomovision version 69, Copyright (C) year name of author Gnomovision comes
    with ABSOLUTELY NO WARRANTY; for details type `show w'. This is free
    software, and you are welcome to redistribute it under certain conditions; type
    `show c' for details.
    The hypothetical commands `show w' and `show c' should show the appropriate parts
    of the General Public License. Of course, the commands you use may be called
    something other than `show w' and `show c'; they could even be mouse-clicks or menu
    items--whatever suits your program.
    You should also get your employer (if you work as a programmer) or your school, if any,
    to sign a "copyright disclaimer" for the program, if necessary. Here is a sample; alter the
    names:
    Yoyodyne, Inc., hereby disclaims all copyright interest in the program
    `Gnomovision' (which makes passes at compilers) written by James Hacker.

    138

    <signature of Ty Coon>, 1 April 1989
    Ty Coon, President of Vice
    This General Public License does not permit incorporating your program into
    proprietary programs. If your program is a subroutine library, you may consider it more
    useful to permit linking proprietary applications with the library. If this is what you want
    to do, use the GNU Lesser General Public License instead of this License.
    GNU LGPL
    This projector product includes the open source software programs which apply
    the GNU Lesser General Public License Version 2 or later version ("LGPL
    Programs").
    We provide the source code of the LGPL Programs until five (5) years after the
    discontinuation of same model of this projector product.
    If you desire to receive the source code of the LGPL Programs, please see the
    "EPSON Projector Contact List" in the User's Guide, and contact the customer
    support of your region.
    These LGPL Programs are WITHOUT ANY WARRANTY; without even the
    implied warranty of MERCHANTABILITY AND FITNESS FOR A
    PARTICULAR PURPOSE. See the GNU General Public License for more details.
    The list of LGPL Programs is as follows and the names of author are described in
    the source code of the LGPL Programs.
    LGPL Programs
    uClibc-0.9.29
    SDL-1.2.13
    The GNU Lesser General Public License Version 2 is as follows. You also can see the
    GNU Lesser General Public License Version 2 at http://www.gnu.org/licenses/.
    GNU LESSER GENERAL PUBLIC LICENSE
    Version 2.1, February 1999
    Copyright (C) 1991, 1999 Free Software Foundation, Inc. 51 Franklin Street, Fifth Floor,
    Boston, MA 02110-1301 USA Everyone is permitted to copy and distribute verbatim
    copies of this license document, but changing it is not allowed.
    [This is the first released version of the Lesser GPL. It also counts as the successor of the
    GNU Library Public License, version 2, hence the version number 2.1.]
    Preamble



  • Page 139

    General Notes

    The licenses for most software are designed to take away your freedom to share and
    change it. By contrast, the GNU General Public Licenses are intended to guarantee your
    freedom to share and change free software--to make sure the software is free for all its
    users.
    This license, the Lesser General Public License, applies to some specially designated
    software packages--typically libraries--of the Free Software Foundation and other
    authors who decide to use it. You can use it too, but we suggest you first think carefully
    about whether this license or the ordinary General Public License is the better strategy to
    use in any particular case, based on the explanations below.
    When we speak of free software, we are referring to freedom of use, not price. Our
    General Public Licenses are designed to make sure that you have the freedom to
    distribute copies of free software (and charge for this service if you wish); that you
    receive source code or can get it if you want it; that you can change the software and use
    pieces of it in new free programs; and that you are informed that you can do these
    things.
    To protect your rights, we need to make restrictions that forbid distributors to deny you
    these rights or to ask you to surrender these rights. These restrictions translate to certain
    responsibilities for you if you distribute copies of the library or if you modify it.
    For example, if you distribute copies of the library, whether gratis or for a fee, you must
    give the recipients all the rights that we gave you. You must make sure that they, too,
    receive or can get the source code. If you link other code with the library, you must
    provide complete object files to the recipients, so that they can relink them with the
    library after making changes to the library and recompiling it. And you must show them
    these terms so they know their rights.
    We protect your rights with a two-step method: (1) we copyright the library, and (2) we
    offer you this license, which gives you legal permission to copy, distribute and/or
    modify the library.
    To protect each distributor, we want to make it very clear that there is no warranty for
    the free library. Also, if the library is modified by someone else and passed on, the
    recipients should know that what they have is not the original version, so that the
    original author's reputation will not be affected by problems that might be introduced
    by others.
    Finally, software patents pose a constant threat to the existence of any free program. We
    wish to make sure that a company cannot effectively restrict the users of a free program
    by obtaining a restrictive license from a patent holder. Therefore, we insist that any
    patent license obtained for a version of the library must be consistent with the full
    freedom of use specified in this license.

    139

    Most GNU software, including some libraries, is covered by the ordinary GNU General
    Public License. This license, the GNU Lesser General Public License, applies to certain
    designated libraries, and is quite different from the ordinary General Public License. We
    use this license for certain libraries in order to permit linking those libraries into nonfree programs.
    When a program is linked with a library, whether statically or using a shared library, the
    combination of the two is legally speaking a combined work, a derivative of the original
    library. The ordinary General Public License therefore permits such linking only if the
    entire combination fits its criteria of freedom. The Lesser General Public License
    permits more lax criteria for linking other code with the library.
    We call this license the "Lesser" General Public License because it does Less to protect
    the user's freedom than the ordinary General Public License. It also provides other free
    software developers Less of an advantage over competing non-free programs. These
    disadvantages are the reason we use the ordinary General Public License for many
    libraries. However, the Lesser license provides advantages in certain special
    circumstances.
    For example, on rare occasions, there may be a special need to encourage the widest
    possible use of a certain library, so that it becomes a de-facto standard. To achieve this,
    non-free programs must be allowed to use the library. A more frequent case is that a free
    library does the same job as widely used non-free libraries. In this case, there is little to
    gain by limiting the free library to free software only, so we use the Lesser General Public
    License.
    In other cases, permission to use a particular library in non-free programs enables a
    greater number of people to use a large body of free software. For example, permission
    to use the GNU C Library in non-free programs enables many more people to use the
    whole GNU operating system, as well as its variant, the GNU/Linux operating system.
    Although the Lesser General Public License is Less protective of the users' freedom, it
    does ensure that the user of a program that is linked with the Library has the freedom
    and the wherewithal to run that program using a modified version of the Library.
    The precise terms and conditions for copying, distribution and modification follow.
    Pay close attention to the difference between a "work based on the library" and a "work
    that uses the library". The former contains code derived from the library, whereas the
    latter must be combined with the library in order to run.



  • Page 140

    General Notes

    GNU LESSER GENERAL PUBLIC LICENSE TERMS AND CONDITIONS FOR
    COPYING, DISTRIBUTION AND MODIFICATION
    0. This License Agreement applies to any software library or other program which
    contains a notice placed by the copyright holder or other authorized party saying it
    may be distributed under the terms of this Lesser General Public License (also
    called "this License"). Each licensee is addressed as "you".
    A "library" means a collection of software functions and/or data prepared so as to
    be conveniently linked with application programs (which use some of those
    functions and data) to form executables.
    The "Library", below, refers to any such software library or work which has been
    distributed under these terms. A "work based on the Library" means either the
    Library or any derivative work under copyright law: that is to say, a work
    containing the Library or a portion of it, either verbatim or with modifications
    and/or translated straightforwardly into another language. (Hereinafter,
    translation is included without limitation in the term "modification".)
    "Source code" for a work means the preferred form of the work for making
    modifications to it. For a library, complete source code means all the source code
    for all modules it contains, plus any associated interface definition files, plus the
    scripts used to control compilation and installation of the library.
    Activities other than copying, distribution and modification are not covered by
    this License; they are outside its scope. The act of running a program using the
    Library is not restricted, and output from such a program is covered only if its
    contents constitute a work based on the Library (independent of the use of the
    Library in a tool for writing it). Whether that is true depends on what the Library
    does and what the program that uses the Library does.
    1. You may copy and distribute verbatim copies of the Library's complete source
    code as you receive it, in any medium, provided that you conspicuously and
    appropriately publish on each copy an appropriate copyright notice and
    disclaimer of warranty; keep intact all the notices that refer to this License and to
    the absence of any warranty; and distribute a copy of this License along with the
    Library.
    You may charge a fee for the physical act of transferring a copy, and you may at
    your option offer warranty protection in exchange for a fee.
    2. You may modify your copy or copies of the Library or any portion of it, thus
    forming a work based on the Library, and copy and distribute such modifications
    or work under the terms of Section 1 above, provided that you also meet all of these
    conditions:

    140

    a)
    b)

    The modified work must itself be a software library.
    You must cause the files modified to carry prominent notices stating that you
    changed the files and the date of any change.
    c) You must cause the whole of the work to be licensed at no charge to all third
    parties under the terms of this License.
    d) If a facility in the modified Library refers to a function or a table of data to be
    supplied by an application program that uses the facility, other than as an
    argument passed when the facility is invoked, then you must make a good
    faith effort to ensure that, in the event an application does not supply such
    function or table, the facility still operates, and performs whatever part of its
    purpose remains meaningful.
    (For example, a function in a library to compute square roots has a purpose
    that is entirely well-defined independent of the application. Therefore,
    Subsection 2d requires that any application-supplied function or table used
    by this function must be optional: if the application does not supply it, the
    square root function must still compute square roots.)
    These requirements apply to the modified work as a whole. If identifiable sections
    of that work are not derived from the Library, and can be reasonably considered
    independent and separate works in themselves, then this License, and its terms, do
    not apply to those sections when you distribute them as separate works. But when
    you distribute the same sections as part of a whole which is a work based on the
    Library, the distribution of the whole must be on the terms of this License, whose
    permissions for other licensees extend to the entire whole, and thus to each and
    every part regardless of who wrote it.
    Thus, it is not the intent of this section to claim rights or contest your rights to work
    written entirely by you; rather, the intent is to exercise the right to control the
    distribution of derivative or collective works based on the Library.
    In addition, mere aggregation of another work not based on the Library with the
    Library (or with a work based on the Library) on a volume of a storage or
    distribution medium does not bring the other work under the scope of this
    License.



  • Page 141

    General Notes

    3.

    4.

    5.

    You may opt to apply the terms of the ordinary GNU General Public License
    instead of this License to a given copy of the Library. To do this, you must alter all
    the notices that refer to this License, so that they refer to the ordinary GNU
    General Public License, version 2, instead of to this License. (If a newer version
    than version 2 of the ordinary GNU General Public License has appeared, then you
    can specify that version instead if you wish.) Do not make any other change in
    these notices.
    Once this change is made in a given copy, it is irreversible for that copy, so the
    ordinary GNU General Public License applies to all subsequent copies and
    derivative works made from that copy.
    This option is useful when you wish to copy part of the code of the Library into a
    program that is not a library.
    You may copy and distribute the Library (or a portion or derivative of it, under
    Section 2) in object code or executable form under the terms of Sections 1 and 2
    above provided that you accompany it with the complete corresponding machinereadable source code, which must be distributed under the terms of Sections 1 and
    2 above on a medium customarily used for software interchange.
    If distribution of object code is made by offering access to copy from a designated
    place, then offering equivalent access to copy the source code from the same place
    satisfies the requirement to distribute the source code, even though third parties
    are not compelled to copy the source along with the object code.
    A program that contains no derivative of any portion of the Library, but is
    designed to work with the Library by being compiled or linked with it, is called a
    "work that uses the Library". Such a work, in isolation, is not a derivative work of
    the Library, and therefore falls outside the scope of this License.
    However, linking a "work that uses the Library" with the Library creates an
    executable that is a derivative of the Library (because it contains portions of the
    Library), rather than a "work that uses the library". The executable is therefore
    covered by this License. Section 6 states terms for distribution of such executables.
    When a "work that uses the Library" uses material from a header file that is part of
    the Library, the object code for the work may be a derivative work of the Library
    even though the source code is not. Whether this is true is especially significant if
    the work can be linked without the Library, or if the work is itself a library. The
    threshold for this to be true is not precisely defined by law.

    141

    6.

    If such an object file uses only numerical parameters, data structure layouts and
    accessors, and small macros and small inline functions (ten lines or less in length),
    then the use of the object file is unrestricted, regardless of whether it is legally a
    derivative work. (Executables containing this object code plus portions of the
    Library will still fall under Section 6.)
    Otherwise, if the work is a derivative of the Library, you may distribute the object
    code for the work under the terms of Section 6. Any executables containing that
    work also fall under Section 6, whether or not they are linked directly with the
    Library itself.
    As an exception to the Sections above, you may also combine or link a "work that
    uses the Library" with the Library to produce a work containing portions of the
    Library, and distribute that work under terms of your choice, provided that the
    terms permit modification of the work for the customer's own use and reverse
    engineering for debugging such modifications.
    You must give prominent notice with each copy of the work that the Library is used
    in it and that the Library and its use are covered by this License. You must supply a
    copy of this License. If the work during execution displays copyright notices, you
    must include the copyright notice for the Library among them, as well as a
    reference directing the user to the copy of this License. Also, you must do one of
    these things:
    a) Accompany the work with the complete corresponding machine-readable
    source code for the Library including whatever changes were used in the work
    (which must be distributed under Sections 1 and 2 above); and, if the work is
    an executable linked with the Library, with the complete machine-readable
    "work that uses the Library", as object code and/or source code, so that the
    user can modify the Library and then relink to produce a modified executable
    containing the modified Library. (It is understood that the user who changes
    the contents of definitions files in the Library will not necessarily be able to
    recompile the application to use the modified definitions.)
    b) Use a suitable shared library mechanism for linking with the Library. A
    suitable mechanism is one that (1) uses at run time a copy of the library
    already present on the user's computer system, rather than copying library
    functions into the executable, and (2) will operate properly with a modified
    version of the library, if the user installs one, as long as the modified version is
    interface-compatible with the version that the work was made with.
    c) Accompany the work with a written offer, valid for at least three years, to give
    the same user the materials specified in Subsection 6a, above, for a charge no
    more than the cost of performing this distribution.



  • Page 142

    General Notes

    d)

    7.

    8.

    If distribution of the work is made by offering access to copy from a
    designated place, offer equivalent access to copy the above specified materials
    from the same place.
    e) Verify that the user has already received a copy of these materials or that you
    have already sent this user a copy.
    For an executable, the required form of the "work that uses the Library" must
    include any data and utility programs needed for reproducing the executable from
    it. However, as a special exception, the materials to be distributed need not include
    anything that is normally distributed (in either source or binary form) with the
    major components (compiler, kernel, and so on) of the operating system on which
    the executable runs, unless that component itself accompanies the executable.
    It may happen that this requirement contradicts the license restrictions of other
    proprietary libraries that do not normally accompany the operating system. Such a
    contradiction means you cannot use both them and the Library together in an
    executable that you distribute.
    You may place library facilities that are a work based on the Library side-by-side in
    a single library together with other library facilities not covered by this License,
    and distribute such a combined library, provided that the separate distribution of
    the work based on the Library and of the other library facilities is otherwise
    permitted, and provided that you do these two things:
    a) Accompany the combined library with a copy of the same work based on the
    Library, uncombined with any other library facilities. This must be
    distributed under the terms of the Sections above.
    b) Give prominent notice with the combined library of the fact that part of it is a
    work based on the Library, and explaining where to find the accompanying
    uncombined form of the same work.
    You may not copy, modify, sublicense, link with, or distribute the Library except as
    expressly provided under this License. Any attempt otherwise to copy, modify,
    sublicense, link with, or distribute the Library is void, and will automatically
    terminate your rights under this License. However, parties who have received
    copies, or rights, from you under this License will not have their licenses
    terminated so long as such parties remain in full compliance.

    142

    9.

    You are not required to accept this License, since you have not signed it. However,
    nothing else grants you permission to modify or distribute the Library or its
    derivative works. These actions are prohibited by law if you do not accept this
    License. Therefore, by modifying or distributing the Library (or any work based on
    the Library), you indicate your acceptance of this License to do so, and all its terms
    and conditions for copying, distributing or modifying the Library or works based
    on it.
    10. Each time you redistribute the Library (or any work based on the Library), the
    recipient automatically receives a license from the original licensor to copy,
    distribute, link with or modify the Library subject to these terms and conditions.
    You may not impose any further restrictions on the recipients' exercise of the
    rights granted herein. You are not responsible for enforcing compliance by third
    parties with this License.
    11. If, as a consequence of a court judgment or allegation of patent infringement or for
    any other reason (not limited to patent issues), conditions are imposed on you
    (whether by court order, agreement or otherwise) that contradict the conditions of
    this License, they do not excuse you from the conditions of this License. If you
    cannot distribute so as to satisfy simultaneously your obligations under this
    License and any other pertinent obligations, then as a consequence you may not
    distribute the Library at all. For example, if a patent license would not permit
    royalty-free redistribution of the Library by all those who receive copies directly or
    indirectly through you, then the only way you could satisfy both it and this License
    would be to refrain entirely from distribution of the Library.
    If any portion of this section is held invalid or unenforceable under any particular
    circumstance, the balance of the section is intended to apply, and the section as a
    whole is intended to apply in other circumstances.
    It is not the purpose of this section to induce you to infringe any patents or other
    property right claims or to contest validity of any such claims; this section has the
    sole purpose of protecting the integrity of the free software distribution system
    which is implemented by public license practices. Many people have made
    generous contributions to the wide range of software distributed through that
    system in reliance on consistent application of that system; it is up to the author/
    donor to decide if he or she is willing to distribute software through any other
    system and a licensee cannot impose that choice.
    This section is intended to make thoroughly clear what is believed to be a
    consequence of the rest of this License.



  • Page 143

    General Notes

    12. If the distribution and/or use of the Library is restricted in certain countries either
    by patents or by copyrighted interfaces, the original copyright holder who places
    the Library under this License may add an explicit geographical distribution
    limitation excluding those countries, so that distribution is permitted only in or
    among countries not thus excluded. In such case, this License incorporates the
    limitation as if written in the body of this License.
    13. The Free Software Foundation may publish revised and/or new versions of the
    Lesser General Public License from time to time. Such new versions will be similar
    in spirit to the present version, but may differ in detail to address new problems or
    concerns.
    Each version is given a distinguishing version number. If the Library specifies a
    version number of this License which applies to it and "any later version", you have
    the option of following the terms and conditions either of that version or of any
    later version published by the Free Software Foundation. If the Library does not
    specify a license version number, you may choose any version ever published by
    the Free Software Foundation.
    14. If you wish to incorporate parts of the Library into other free programs whose
    distribution conditions are incompatible with these, write to the author to ask for
    permission. For software which is copyrighted by the Free Software Foundation,
    write to the Free Software Foundation; we sometimes make exceptions for this.
    Our decision will be guided by the two goals of preserving the free status of all
    derivatives of our free software and of promoting the sharing and reuse of software
    generally.

    15.

    NO WARRANTY
    BECAUSE THE LIBRARY IS LICENSED FREE OF CHARGE, THERE IS NO
    WARRANTY FOR THE LIBRARY, TO THE EXTENT PERMITTED BY
    APPLICABLE LAW. EXCEPT WHEN OTHERWISE STATED IN WRITING
    THE COPYRIGHT HOLDERS AND/OR OTHER PARTIES PROVIDE THE
    LIBRARY "AS IS" WITHOUT WARRANTY OF ANY KIND, EITHER
    EXPRESSED OR IMPLIED, INCLUDING, BUT NOT LIMITED TO, THE
    IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A
    PARTICULAR PURPOSE. THE ENTIRE RISK AS TO THE QUALITY AND
    PERFORMANCE OF THE LIBRARY IS WITH YOU. SHOULD THE LIBRARY
    PROVE DEFECTIVE, YOU ASSUME THE COST OF ALL NECESSARY
    SERVICING, REPAIR OR CORRECTION.

    143

    16.

    IN NO EVENT UNLESS REQUIRED BY APPLICABLE LAW OR AGREED TO
    IN WRITING WILL ANY COPYRIGHT HOLDER, OR ANY OTHER PARTY
    WHO MAY MODIFY AND/OR REDISTRIBUTE THE LIBRARY AS
    PERMITTED ABOVE, BE LIABLE TO YOU FOR DAMAGES, INCLUDING
    ANY GENERAL, SPECIAL, INCIDENTAL OR CONSEQUENTIAL DAMAGES
    ARISING OUT OF THE USE OR INABILITY TO USE THE LIBRARY
    (INCLUDING BUT NOT LIMITED TO LOSS OF DATA OR DATA BEING
    RENDERED INACCURATE OR LOSSES SUSTAINED BY YOU OR THIRD
    PARTIES OR A FAILURE OF THE LIBRARY TO OPERATE WITH ANY
    OTHER SOFTWARE), EVEN IF SUCH HOLDER OR OTHER PARTY HAS
    BEEN ADVISED OF THE POSSIBILITY OF SUCH DAMAGES.

    END OF TERMS AND CONDITIONS
    How to Apply These Terms to Your New Libraries
    If you develop a new library, and you want it to be of the greatest possible use to the
    public, we recommend making it free software that everyone can redistribute and
    change. You can do so by permitting redistribution under these terms (or, alternatively,
    under the terms of the ordinary General Public License).
    To apply these terms, attach the following notices to the library. It is safest to attach them
    to the start of each source file to most effectively convey the exclusion of warranty; and
    each file should have at least the "copyright" line and a pointer to where the full notice is
    found.
    <one line to give the library's name and a brief idea of what it does.>
    Copyright (C) <year> <name of author>
    This library is free software; you can redistribute it and/or modify it under the
    terms of the GNU Lesser General Public License as published by the Free Software
    Foundation; either version 2.1 of the License, or (at your option) any later version.
    This library is distributed in the hope that it will be useful, but WITHOUT ANY
    WARRANTY; without even the implied warranty of MERCHANTABILITY or
    FITNESS FOR A PARTICULAR PURPOSE. See the GNU Lesser General Public
    License for more details.
    You should have received a copy of the GNU Lesser General Public License along
    with this library; if not, write to the Free Software Foundation, Inc., 51 Franklin
    Street, Fifth Floor, Boston, MA 02110-1301 USA
    Also add information on how to contact you by electronic and paper mail.



  • Page 144

    General Notes

    You should also get your employer (if you work as a programmer) or your school, if any,
    to sign a "copyright disclaimer" for the library, if necessary. Here is a sample; alter the
    names:
    Yoyodyne, Inc., hereby disclaims all copyright interest in the library `Frob' (a
    library for tweaking knobs) written by James Random Hacker.
    <signature of Ty Coon>, 1 April 1990
    Ty Coon, President of Vice
    That's all there is to it!
    BSD License (Berkeley Software Distribution License)
    This projector product includes the open source software program "University of
    California, Berkeley License (Berkeley Software Distribution License)" which applies
    the terms and conditions provided by owner of the copyright to the "BSD License".
    The "BSD License" are WITHOUT ANY WARRANTY; without even the implied
    warranty of MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE.
    List of BSD License programs
    busybox_1.7.2
    License terms of conditions of each program which are provided by owner of the
    copyright to the “BSD License” are as follows.
    Copyright (c) The Regents of the University of California. All rights reserved.
    This code is derived from software contributed to Berkeley by Kenneth Almquist.
    Redistribution and use in source and binary forms, with or without modification, are
    permitted provided that the following conditions are met:
    1.
    Redistributions of source code must retain the above copyright notice, this list of
    conditions and the following disclaimer.
    2.

    3.

    Redistributions in binary form must reproduce the above copyright notice, this
    list of conditions and the following disclaimer in the documentation and/or other
    materials provided with the distribution.
    Neither the name of the University nor the names of its contributors may be used
    to endorse or promote products derived from this software without specific prior
    written permission.

    144

    THIS SOFTWARE IS PROVIDED BY THE REGENTS AND CONTRIBUTORS "AS
    IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
    LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND
    FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT
    SHALL THE REGENTS OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT,
    INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
    DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF
    SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR
    BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF
    LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
    (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF
    THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF
    SUCH DAMAGE.
    libjpeg
    This projector product includes the open source software program "libjpeg" which
    applies the terms and conditions provided by owner of the copyright to the "libjpeg".
    The "libjpeg" are WITHOUT ANY WARRANTY; without even the implied warranty of
    MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE.
    List of libjpeg programs
    libjpeg-6b
    License terms of conditions of each program which are provided by owner of the
    copyright to the "libjpeg" are as follows.
    Copyright (C) 1994-1997, Thomas G. Lane. This file is part of the Independent JPEG
    Group's software. For conditions of distribution and use, see the accompanying
    README file.
    This distribution contains the sixth public release of the Independent JPEG Group's free
    JPEG software. You are welcome to redistribute this software and to use it for any
    purpose, subject to the conditions under LEGAL ISSUES, below.
    LEGAL ISSUES
    ============
    In plain English:
    1.
    We don't promise that this software works. (But if you find any bugs, please let us
    know!)
    2.
    You can use this software for whatever you want. You don't have to pay us.



  • Page 145

    General Notes

    3.

    You may not pretend that you wrote this software. If you use it in a program, you
    must acknowledge somewhere in your documentation that you've used the IJG
    code.
    In legalese:
    The authors make NO WARRANTY or representation, either express or implied, with
    respect to this software, its quality, accuracy, merchantability, or fitness for a particular
    purpose. This software is provided "AS IS", and you, its user, assume the entire risk as to
    its quality and accuracy.
    This software is copyright (C) 1991-1998, Thomas G. Lane. All Rights Reserved except
    as specified below.
    Permission is hereby granted to use, copy, modify, and distribute this software (or
    portions thereof) for any purpose, without fee, subject to these conditions:
    (1) If any part of the source code for this software is distributed, then this README
    file must be included, with this copyright and no-warranty notice unaltered; and
    any additions, deletions, or changes to the original files must be clearly indicated
    in accompanying documentation.
    (2) If only executable code is distributed, then the accompanying documentation
    must state that "this software is based in part on the work of the Independent JPEG
    Group".
    (3) Permission for use of this software is granted only if the user accepts full
    responsibility for any undesirable consequences; the authors accept NO
    LIABILITY for damages of any kind.
    These conditions apply to any software derived from or based on the IJG code, not just to
    the unmodified library. If you use our work, you ought to acknowledge us.
    Permission is NOT granted for the use of any IJG author's name or company name in
    advertising or publicity relating to this software or products derived from it. This
    software may be referred to only as "the Independent JPEG Group's software".
    We specifically permit and encourage the use of this software as the basis of commercial
    products, provided that all warranty or liability claims are assumed by the product
    vendor.
    ansi2knr.c is included in this distribution by permission of L. Peter Deutsch, sole
    proprietor of its copyright holder, Aladdin Enterprises of Menlo Park, CA. ansi2knr.c is
    NOT covered by the above copyright and conditions, but instead by the usual
    distribution terms of the Free Software Foundation; principally, that you must include
    source code if you redistribute it. (See the file ansi2knr.c for full details.) However, since
    ansi2knr.c is not needed as part of any program generated from the IJG code, this does
    not limit you more than the foregoing paragraphs do.

    145

    The Unix configuration script "configure" was produced with GNU Autoconf. It is
    copyright by the Free Software Foundation but is freely distributable. The same holds
    for its supporting scripts (config.guess, config.sub, ltconfig, ltmain.sh). Another
    support script, install-sh, is copyright by M.I.T. but is also freely distributable.
    It appears that the arithmetic coding option of the JPEG spec is covered by patents
    owned by IBM, AT&T, and Mitsubishi. Hence arithmetic coding cannot legally be used
    without obtaining one or more licenses. For this reason, support for arithmetic coding
    has been removed from the free JPEG software. (Since arithmetic coding provides only a
    marginal gain over the unpatented Huffman mode, it is unlikely that very many
    implementations will support it.) So far as we are aware, there are no patent restrictions
    on the remaining code.
    The IJG distribution formerly included code to read and write GIF files. To avoid
    entanglement with the Unisys LZW patent, GIF reading support has been removed
    altogether, and the GIF writer has been simplified to produce "uncompressed GIFs".
    This technique does not use the LZW algorithm; the resulting GIF files are larger than
    usual, but are readable by all standard GIF decoders.
    We are required to state that
    "The Graphics Interchange Format(c) is the Copyright property of CompuServe
    Incorporated. GIF(sm) is a Service Mark property of CompuServe Incorporated."
    libpng
    This projector product includes the open source software program "libpng" which
    applies the terms and conditions provided by owner of the copyright to the "libpng".
    The "libpng" are WITHOUT ANY WARRANTY; without even the implied warranty of
    MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE.
    List of libpng programs
    libpng-1.2.7
    License terms of conditions of each program which are provided by owner of the
    copyright to the "libpng" are as follows.
    For conditions of distribution and use, see copyright notice in png.h Copyright (c)
    1998-2004 Glenn Randers-Pehrson (Version 0.96 Copyright (c) 1996, 1997 Andreas
    Dilger) (Version 0.88 Copyright (c) 1995, 1996 Guy Eric Schalnat, Group 42, Inc.)
    This copy of the libpng notices is provided for your convenience. In case of any
    discrepancy between this copy and the notices in the file png.h that is included in the
    libpng distribution, the latter shall prevail.
    COPYRIGHT NOTICE, DISCLAIMER, and LICENSE:



  • Page 146

    General Notes

    If you modify libpng you may insert additional notices immediately following this
    sentence.
    libpng version 1.2.6, September 12, 2004, is Copyright (c) 2004 Glenn Randers-Pehrson,
    and is distributed according to the same disclaimer and license as libpng-1.2.5 with the
    following individual added to the list of Contributing Authors
    Cosmin Truta
    libpng versions 1.0.7, July 1, 2000, through 1.2.5 - October 3, 2002, are Copyright (c)
    2000-2002 Glenn Randers-Pehrson, and are distributed according to the same
    disclaimer and license as libpng-1.0.6 with the following individuals added to the list of
    Contributing Authors
    Simon-Pierre Cadieux
    Eric S. Raymond
    Gilles Vollant
    and with the following additions to the disclaimer:
    There is no warranty against interference with your enjoyment of the library or
    against infringement. There is no warranty that our efforts or the library will fulfill
    any of your particular purposes or needs. This library is provided with all faults,
    and the entire risk of satisfactory quality, performance, accuracy, and effort is with
    the user.
    libpng versions 0.97, January 1998, through 1.0.6, March 20, 2000, are Copyright (c)
    1998, 1999 Glenn Randers-Pehrson, and are distributed according to the same
    disclaimer and license as libpng-0.96, with the following individuals added to the list of
    Contributing Authors:
    Tom Lane
    Glenn Randers-Pehrson
    Willem van Schaik
    libpng versions 0.89, June 1996, through 0.96, May 1997, are Copyright (c) 1996, 1997
    Andreas Dilger Distributed according to the same disclaimer and license as libpng-0.88,
    with the following individuals added to the list of Contributing Authors:
    John Bowler
    Kevin BraceySam Bushell
    Sam Bushell
    Magnus Holmgren
    Greg Roelofs
    Tom Tanner

    146

    libpng versions 0.5, May 1995, through 0.88, January 1996, are Copyright (c) 1995, 1996
    Guy Eric Schalnat, Group 42, Inc.
    For the purposes of this copyright and license, "Contributing Authors" is defined as the
    following set of individuals:
    Andreas Dilger
    Dave Martindale
    Guy Eric Schalnat
    Paul Schmidt
    Tim Wegner
    The PNG Reference Library is supplied "AS IS". The Contributing Authors and Group
    42, Inc. disclaim all warranties, expressed or implied, including, without limitation, the
    warranties of merchantability and of fitness for any purpose. The Contributing Authors
    and Group 42, Inc. assume no liability for direct, indirect, incidental, special, exemplary,
    or consequential damages, which may result from the use of the PNG Reference Library,
    even if advised of the possibility of such damage.
    Permission is hereby granted to use, copy, modify, and distribute this source code, or
    portions hereof, for any purpose, without fee, subject to the following restrictions:
    1.
    The origin of this source code must not be misrepresented.
    2.
    Altered versions must be plainly marked as such and must not be misrepresented
    as being the original source.
    3.

    This Copyright notice may not be removed or altered from any source or altered
    source distribution.
    The Contributing Authors and Group 42, Inc. specifically permit, without fee, and
    encourage the use of this source code as a component to supporting the PNG file format
    in commercial products. If you use this source code in a product, acknowledgment is not
    required but would be appreciated.
    A "png_get_copyright" function is available, for convenient use in "about" boxes and the
    like:
    printf("%s",png_get_copyright(NULL));
    Also, the PNG logo (in PNG format, of course) is supplied in the files "pngbar.png" and
    "pngbar.jpg (88x31) and "pngnow.png" (98x31).
    Libpng is OSI Certified Open Source Software. OSI Certified Open Source is a
    certification mark of the Open Source Initiative.



  • Page 147

    General Notes

    Glenn Randers-Pehrson
    glennrp@users.sourceforge.net
    September 12, 2004
    zlib
    This projector product includes the open source software program "zlib" which applies
    the terms and conditions provided by owner of the copyright to the "zlib".
    The "zlib" are WITHOUT ANY WARRANTY; without even the implied warranty of
    MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE.
    List of zlib programs
    zlib-1.1.4
    License terms of conditions of each program which are provided by owner of the
    copyright to the “zlib” are as follows.
    Copyright notice:
    (C) 1995-1998 Jean-loup Gailly and Mark Adler
    This software is provided 'as-is', without any express or implied warranty. In no
    event will the authors be held liable for any damages arising from the use of this
    software.
    Permission is granted to anyone to use this software for any purpose, including
    commercial applications, and to alter it and redistribute it freely, subject to the
    following restrictions:
    1.

    2.

    The origin of this software must not be misrepresented; you must not claim
    that you wrote the original software. If you use this software in a product, an
    acknowledgment in the product documentation would be appreciated but is
    not required.
    Altered source versions must be plainly marked as such, and must not be
    misrepresented as being the original software.

    3. This notice may not be removed or altered from any source distribution.
    Jean-loup Gailly
    Mark Adler
    jloup@gzip.org
    madler@alumni.caltech.edu
    If you use the zlib library in a product, we would appreciate *not* receiving lengthy legal
    documents to sign. The sources are provided for free but without warranty of any kind.
    The library has been entirely written by Jean-loup Gailly and Mark Adler; it does not
    include third-party code.

    147

    If you redistribute modified sources, we would appreciate that you include in the file
    ChangeLog history information documenting your changes.
    libmd5-rfc
    This projector product includes the open source software program "libmd5-rfc" which
    applies the terms and conditions provided by owner of the copyright to the "libmd5rfc".
    The "libmd5-rfc" are WITHOUT ANY WARRANTY; without even the implied
    warranty of MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE.
    List of libmd5-rfc programs
    libmd5-rfc
    License terms of conditions of each program which are provided by owner of the
    copyright to the "libmd5-rfc" are as follows.
    Copyright (C) 1999, 2002 Aladdin Enterprises. All rights reserved.
    This software is provided 'as-is', without any express or implied warranty. In no
    event will the authors be held liable for any damages arising from the use of this
    software.
    Permission is granted to anyone to use this software for any purpose, including
    commercial applications, and to alter it and redistribute it freely, subject to the
    following restrictions:
    1. The origin of this software must not be misrepresented; you must not claim
    that you wrote the original software. If you use this software in a product, an
    acknowledgment in the product documentation would be appreciated but is
    not required.
    2. Altered source versions must be plainly marked as such, and must not be
    misrepresented as being the original software.
    3. This notice may not be removed or altered from any source distribution.
    L. Peter Deutsch ghost@aladdin.com
    Independent implementation of MD5 (RFC 1321).
    This code implements the MD5 Algorithm defined in RFC 1321, whose text is available
    at
    http://www.ietf.org/rfc/rfc1321.txt
    The code is derived from the text of the RFC, including the test suite (section A.5) but
    excluding the rest of Appendix A. It does not include any code or documentation that is
    identified in the RFC as being copyrighted.



  • Page 148

    General Notes

    The original and principal author of md5.h is L. Peter Deutsch <ghost@aladdin.com>.
    Other authors are noted in the change history that follows (in reverse chronological
    order):
    2002-04-13 lpd Removed support for non-ANSI compilers; removed
    references to Ghostscript; clarified derivation from RFC 1321; now handles byte
    order either statically or dynamically.
    1999-11-04 lpd Edited comments slightly for automatic TOC extraction.
    1999-10-18 lpd Fixed typo in header comment (ansi2knr rather than md5);
    added conditionalization for C++ compilation from Martin Purschke
    <purschke@bnl.gov>.
    1999-05-03 lpd Original version.
    ncurses
    This projector product includes the open source software program "ncurses" which
    applies the terms and conditions provided by owner of the copyright to the "ncurses".
    The "ncurses" are WITHOUT ANY WARRANTY; without even the implied warranty
    of MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE.
    List of ncurses programs
    ncurses-5.6
    License terms of conditions of each program which are provided by owner of the
    copyright to the “ncurses” are as follows.
    Copyright (c) 1998-2002,2003 Free Software Foundation, Inc.
    Permission is hereby granted, free of charge, to any person obtaining a copy of this
    software and associated documentation files (the "Software"), to deal in the Software
    without restriction, including without limitation the rights to use, copy, modify, merge,
    publish, distribute, distribute with modifications, sublicense, and/or sell copies of the
    Software, and to permit persons to whom the Software is furnished to do so, subject to
    the following conditions:
    The above copyright notice and this permission notice shall be included in all copies or
    substantial portions of the Software.

    148

    THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
    EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES
    OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
    NONINFRINGEMENT. IN NO EVENT SHALL THE ABOVE COPYRIGHT
    HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY,
    WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
    FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
    OTHER DEALINGS IN THE SOFTWARE.
    Except as contained in this notice, the name(s) of the above copyright holders shall not
    be used in advertising or otherwise to promote the sale, use or other dealings in this
    Software without prior written authorization.
    mDNSResponder
    This projector product includes the open source software program "mDNSResponder"
    which applies the following license terms "Apache License Version 2.0, January 2004".
    List of "mDNSResponder"
    mDNSResponder-107.6 (only mDNSResponderPosix is used)
    License terms “Apache License Version 2.0, January 2004" are as follows.
    Apache License
    Version 2.0, January 2004
    http://www.apache.org/licenses/
    TERMS AND CONDITIONS FOR USE, REPRODUCTION, AND DISTRIBUTION
    1.
    Definitions.
    "License" shall mean the terms and conditions for use, reproduction, and
    distribution as defined by Sections 1 through 9 of this document.
    "Licensor" shall mean the copyright owner or entity authorized by the copyright
    owner that is granting the License.
    "Legal Entity" shall mean the union of the acting entity and all other entities that
    control, are controlled by, or are under common control with that entity. For the
    purposes of this definition, "control" means (i) the power, direct or indirect, to
    cause the direction or management of such entity, whether by contract or
    otherwise, or (ii) ownership of fifty percent (50%) or more of the outstanding
    shares, or (iii) beneficial ownership of such entity.



  • Page 149

    General Notes

    2.

    "You" (or "Your") shall mean an individual or Legal Entity exercising permissions
    granted by this License.
    "Source" form shall mean the preferred form for making modifications, including
    but not limited to software source code, documentation source, and configuration
    files.
    "Object" form shall mean any form resulting from mechanical transformation or
    translation of a Source form, including but not limited to compiled object code,
    generated documentation, and conversions to other media types.
    "Work" shall mean the work of authorship, whether in Source or Object form,
    made available under the License, as indicated by a copyright notice that is
    included in or attached to the work (an example is provided in the Appendix
    below).
    "Derivative Works" shall mean any work, whether in Source or Object form, that is
    based on (or derived from) the Work and for which the editorial revisions,
    annotations, elaborations, or other modifications represent, as a whole, an
    original work of authorship. For the purposes of this License, Derivative Works
    shall not include works that remain separable from, or merely link (or bind by
    name) to the interfaces of, the Work and Derivative Works thereof.
    "Contribution" shall mean any work of authorship, including the original version
    of the Work and any modifications or additions to that Work or Derivative Works
    thereof, that is intentionally submitted to Licensor for inclusion in the Work by
    the copyright owner or by an individual or Legal Entity authorized to submit on
    behalf of the copyright owner. For the purposes of this definition, "submitted"
    means any form of electronic, verbal, or written communication sent to the
    Licensor or its representatives, including but not limited to communication on
    electronic mailing lists, source code control systems, and issue tracking systems
    that are managed by, or on behalf of, the Licensor for the purpose of discussing and
    improving the Work, but excluding communication that is conspicuously marked
    or otherwise designated in writing by the copyright owner as "Not a
    Contribution."
    "Contributor" shall mean Licensor and any individual or Legal Entity on behalf of
    whom a Contribution has been received by Licensor and subsequently
    incorporated within the Work.
    Grant of Copyright License. Subject to the terms and conditions of this License,
    each Contributor hereby grants to You a perpetual, worldwide, non-exclusive,
    no-charge, royalty-free, irrevocable copyright license to reproduce, prepare
    Derivative Works of, publicly display, publicly perform, sublicense, and distribute
    the Work and such Derivative Works in Source or Object form.

    149

    3.

    4.

    Grant of Patent License. Subject to the terms and conditions of this License, each
    Contributor hereby grants to You a perpetual, worldwide, non-exclusive, nocharge, royalty-free, irrevocable (except as stated in this section) patent license to
    make, have made, use, offer to sell, sell, import, and otherwise transfer the Work,
    where such license applies only to those patent claims licensable by such
    Contributor that are necessarily infringed by their Contribution(s) alone or by
    combination of their Contribution(s) with the Work to which such
    Contribution(s) was submitted. If You institute patent litigation against any entity
    (including a cross-claim or counterclaim in a lawsuit) alleging that the Work or a
    Contribution incorporated within the Work constitutes direct or contributory
    patent infringement, then any patent licenses granted to You under this License
    for that Work shall terminate as of the date such litigation is filed.
    Redistribution. You may reproduce and distribute copies of the Work or
    Derivative Works thereof in any medium, with or without modifications, and in
    Source or Object form, provided that You meet the following conditions:
    (a) You must give any other recipients of the Work or Derivative Works a copy
    of this License; and
    (b) You must cause any modified files to carry prominent notices stating that
    You changed the files; and
    (c) You must retain, in the Source form of any Derivative Works that You
    distribute, all copyright, patent, trademark, and attribution notices from the
    Source form of the Work, excluding those notices that do not pertain to any
    part of the Derivative Works; and
    (d) If the Work includes a "NOTICE" text file as part of its distribution, then any
    Derivative Works that You distribute must include a readable copy of the
    attribution notices contained within such NOTICE file, excluding those
    notices that do not pertain to any part of the Derivative Works, in at least one
    of the following places: within a NOTICE text file distributed as part of the
    Derivative Works; within the Source form or documentation, if provided
    along with the Derivative Works; or, within a display generated by the
    Derivative Works, if and wherever such third-party notices normally appear.
    The contents of the NOTICE file are for informational purposes only and do
    not modify the License. You may add Your own attribution notices within
    Derivative Works that You distribute, alongside or as an addendum to the
    NOTICE text from the Work, provided that such additional attribution
    notices cannot be construed as modifying the License.



  • Page 150

    General Notes

    5.

    6.

    7.

    8.

    You may add Your own copyright statement to Your modifications and may
    provide additional or different license terms and conditions for use, reproduction,
    or distribution of Your modifications, or for any such Derivative Works as a
    whole, provided Your use, reproduction, and distribution of the Work otherwise
    complies with the conditions stated in this License.
    Submission of Contributions. Unless You explicitly state otherwise, any
    Contribution intentionally submitted for inclusion in the Work by You to the
    Licensor shall be under the terms and conditions of this License, without any
    additional terms or conditions.
    Notwithstanding the above, nothing herein shall supersede or modify the terms of
    any separate license agreement you may have executed with Licensor regarding
    such Contributions.
    Trademarks. This License does not grant permission to use the trade names,
    trademarks, service marks, or product names of the Licensor, except as required
    for reasonable and customary use in describing the origin of the Work and
    reproducing the content of the NOTICE file.
    Disclaimer of Warranty. Unless required by applicable law or agreed to in writing,
    Licensor provides the Work (and each Contributor provides its Contributions) on
    an "AS IS" BASIS, WITHOUT WARRANTIES OR CONDITIONS OF ANY
    KIND, either express or implied, including, without limitation, any warranties or
    conditions of TITLE, NON-INFRINGEMENT, MERCHANTABILITY, or
    FITNESS FOR A PARTICULAR PURPOSE. You are solely responsible for
    determining the appropriateness of using or redistributing the Work and assume
    any risks associated with Your exercise of permissions under this License.
    Limitation of Liability. In no event and under no legal theory, whether in tort
    (including negligence), contract, or otherwise, unless required by applicable law
    (such as deliberate and grossly negligent acts) or agreed to in writing, shall any
    Contributor be liable to You for damages, including any direct, indirect, special,
    incidental, or consequential damages of any character arising as a result of this
    License or out of the use or inability to use the Work (including but not limited to
    damages for loss of goodwill, work stoppage, computer failure or malfunction, or
    any and all other commercial damages or losses), even if such Contributor has
    been advised of the possibility of such damages.

    150

    9.

    Accepting Warranty or Additional Liability. While redistributing the Work or
    Derivative Works thereof, You may choose to offer, and charge a fee for,
    acceptance of support, warranty, indemnity, or other liability obligations and/or
    rights consistent with this License. However, in accepting such obligations, You
    may act only on Your own behalf and on Your sole responsibility, not on behalf of
    any other Contributor, and only if You agree to indemnify, defend, and hold each
    Contributor harmless for any liability incurred by, or claims asserted against, such
    Contributor by reason of your accepting any such warranty or additional liability.

    END OF TERMS AND CONDITIONS
    APPENDIX: How to apply the Apache License to your work.
    To apply the Apache License to your work, attach the following boilerplate notice,
    with the fields enclosed by brackets "[]" replaced with your own identifying
    information. (Don't include the brackets!) The text should be enclosed in the
    appropriate comment syntax for the file format. We also recommend that a file or
    class name and description of purpose be included on the same "printed page" as
    the copyright notice for easier identification within third-party archives.
    Copyright [yyyy][name of copyright owner]
    Licensed under the Apache License, Version 2.0 (the "License");
    you may not use this file except in compliance with the License.
    You may obtain a copy of the License at
    http://www.apache.org/licenses/LICENSE-2.0
    Unless required by applicable law or agreed to in writing, software distributed under the
    License is distributed on an "AS IS" BASIS, WITHOUT WARRANTIES OR
    CONDITIONS OF ANY KIND, either express or implied.
    See the License for the specific language governing permissions and limitations under
    the License.



  • Page 151

    Index

    151

    Control Panel Lock ............................... 52, 76
    Cross .............................................................. 47

    A
    A/V Mute ...................................................... 40
    Address 1 Setting ......................................... 87
    Address 2 Settings ........................................ 87
    Address 3 Setting ......................................... 87
    Air exhaust vent ........................................... 11
    Air filter replacement period ................... 114
    Audio-L/R Input Port ................................. 13
    Auto Setup .................................................... 75

    B
    Basic Menu ................................................... 82
    Blackboard .................................................... 39
    Brightness ..................................................... 74

    Image files ..................................................... 31
    Image Menu ................................................. 74
    Indicators ...................................................... 94
    Info Menu ..................................................... 90
    Input Signal .................................................. 90
    IP Address .............................................. 83, 87

    D
    DHCP ............................................................
    Direct Power On ..........................................
    Display ...........................................................
    Display Background ....................................
    Display order ................................................
    Display Settings ............................................

    83
    78
    78
    78
    33
    33

    E
    Easy Interactive Pen .................................... 18
    ECO ............................................................... 77
    ESC/VP21 ................................................... 121
    Extended Menu ............................................ 78
    E-Zoom ......................................................... 47

    C
    Ceiling mount fixing points ....................... 15
    Cleaning the Air filter and Air Intake Vent
    ........................................................................ 108
    Cleaning the Projection Window ............ 108
    Cleaning the Projector's Surface .............. 108
    Color Adjustment ........................................ 74
    Color Mode ............................................ 39, 74
    Color Saturation .......................................... 74
    Computer1 input port ................................. 14
    Computer2 input port ................................. 14
    Configuration Menu ................................... 73
    Connecting USB devices ............................. 34
    Consumables .............................................. 116
    Continuous ................................................... 33
    Contrast ........................................................ 74
    Control panel ............................................... 15

    I

    J
    jpg .................................................................. 28

    K
    Keystone ........................................................ 76

    L
    Lamp cover ................................................... 11
    Lamp Hours .................................................. 90
    Lamp indicator ............................................. 94
    Lamp replacement period ........................ 111
    Language ....................................................... 79

    F
    Freeze .............................................................
    Front ..............................................................
    Front/Ceiling ................................................
    Full Lock .......................................................

    41
    78
    78
    52

    M
    Mail menu ..................................................... 87
    Mail Notification ................................... 66, 87
    Messages ....................................................... 78
    Mic Input Level ............................................ 77
    Mic input port .............................................. 14
    Mouse Pointer .............................................. 48

    G
    Gateway Address ................................... 83, 86

    H
    Help function ............................................... 93
    High Altitude Mode .................................... 78
    How to replace the air filter ..................... 114
    How to replace the lamp ........................... 111

    N
    Network Menu ............................................. 80



  • Page 152

    Index

    Network Protect ........................................... 51

    152

    Rear ................................................................ 78
    Rear/Ceiling .................................................. 78
    Refresh Rate .................................................. 90
    Remote Control ........................................... 16
    Remote Receiver .................................... 11, 12
    Replacing Batteries .................................... 110
    Reset All ........................................................ 91
    Reset Menu ................................................... 91
    Resetting the lamp operating time
    .................................................................. 91, 114
    Resolution ............................................. 90, 119
    Rotating images ........................................... 30

    O
    Operating temperature ............................. 124
    Operation ...................................................... 78
    Optional accessories .................................. 116
    Others Menu ................................................ 88
    Overheating .................................................. 95

    P
    Part Names and Functions ......................... 11
    Password Protect ......................................... 50
    Password protect sticker ............................. 51
    Photo ............................................................. 39
    PJLink .......................................................... 123
    Pointer ........................................................... 46
    Pointer Shape ............................................... 76
    Port Number ................................................ 87
    Position ......................................................... 75
    Power Consumption ................................... 77
    Power indicator ............................................ 94
    Power inlet .................................................... 13
    Power On Protect ........................................ 50
    Presentation ........................................... 28, 39
    Problem Solving ........................................... 94
    Progressive .................................................... 75
    Projecting Image Files ................................. 31
    Projection ...................................................... 78
    Projection Distance ................................... 117
    Projection window ...................................... 12
    Projector Name ............................................ 82

    SSID ............................................................... 83
    Standby Mode .............................................. 79
    Startup Screen .............................................. 78
    Storage temperature .................................. 124
    Subnet Mask ........................................... 83, 86
    Supported Resolutions .............................. 119
    S-Video Input Port ...................................... 13
    Sync Info ....................................................... 90
    Sync. ............................................................... 75

    R

    T
    Temp indicator ............................................
    Theatre ..........................................................
    Tint ................................................................
    Tracking ........................................................
    Trap IP Address ...........................................

    S
    Screen Size .................................................. 117
    Screen switching time ................................. 33
    Security menu .............................................. 84
    Security slot .................................................. 12
    Settings Menu ............................................... 76
    Sharpness ...................................................... 74
    Signal Menu .................................................. 75
    Sleep Mode ................................................... 78
    Slide plate ...................................................... 14
    Slideshow ................................................ 29, 32
    SMTP Server ................................................. 87
    SNMP ...................................................... 67, 88
    Soft keyboard ................................................ 81
    Source ............................................................ 90
    Source Search ......................................... 15, 21
    Specifications ............................................. 124
    Sports ............................................................. 39
    sRGB .............................................................. 39

    94
    39
    74
    75
    88

    U
    User Pattern .................................................. 70
    User's Logo ................................................... 68
    User's Logo Protect ...................................... 50

    V
    Video Input Port .......................................... 13
    Video Signal ........................................... 76, 90
    Volume .......................................................... 77

    W
    Web Browser ................................................
    Web Control .................................................
    Web Remotel ................................................
    Wide-screen projection ..............................

    63
    63
    64
    41



  • Page 153

    Index

    Wired LAN menu ........................................ 86
    Wireless LAN Menu .................................... 83
    Wireless Mouse Function ........................... 48

    153






Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Art des Missbrauchs:

Zum Beispiel antisemitische Inhalte, rassistische Inhalte oder Material, das zu einer Gewalttat führen könnte.

Beispielsweise eine Kreditkartennummer, persönliche Identifikationsnummer oder unveröffentlichte Privatadresse. Beachten Sie, dass E-Mail-Adressen und der vollständige Name nicht als private Informationen angesehen werden.

Forenregeln

Um zu sinnvolle Fragen zu kommen halten Sie sich bitte an folgende Spielregeln:

Neu registrieren

Registrieren auf E - Mails für Epson eb 450w wenn:


Sie erhalten eine E-Mail, um sich für eine oder beide Optionen anzumelden.


Holen Sie sich Ihr Benutzerhandbuch per E-Mail

Geben Sie Ihre E-Mail-Adresse ein, um das Handbuch zu erhalten von Epson eb 450w in der Sprache / Sprachen: Englisch als Anhang in Ihrer E-Mail.

Das Handbuch ist 6,03 mb groß.

 

Sie erhalten das Handbuch in Ihrer E-Mail innerhalb von Minuten. Wenn Sie keine E-Mail erhalten haben, haben Sie wahrscheinlich die falsche E-Mail-Adresse eingegeben oder Ihre Mailbox ist zu voll. Darüber hinaus kann es sein, dass Ihr ISP eine maximale Größe für E-Mails empfangen kann.

Andere Handbücher von Epson eb 450w

Epson eb 450w Installationsanweisung - Englisch - 21 seiten

Epson eb 450w Bedienungsanleitung - Holländisch - 158 seiten


Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Wenn Sie innerhalb von 15 Minuten keine E-Mail mit dem Handbuch erhalten haben, kann es sein, dass Sie eine falsche E-Mail-Adresse eingegeben haben oder dass Ihr ISP eine maximale Größe eingestellt hat, um E-Mails zu erhalten, die kleiner als die Größe des Handbuchs sind.

Ihre Frage wurde zu diesem Forum hinzugefügt

Möchten Sie eine E-Mail erhalten, wenn neue Antworten und Fragen veröffentlicht werden? Geben Sie bitte Ihre Email-Adresse ein.



Info