216264
63
Zoom out
Zoom in
Vorherige Seite
1/153
Nächste Seite
You can make Configuration Menu settings and control the projector by
using the Web browser of a computer that is connected to the projector via
a network. By using this function you can perform setup and control
operations remotely. In addition, since you can use the computer's
keyboard, entering characters required for the setup is easier.
Use Microsoft Internet Explorer 6.0 or later as the Web browser. If you are
using Mac OS, you can also use Safari.
q
If you set Standby Mode to Communication On from the Extended
menu in the projector's Configuration Menu, you can use the Web
browser to make settings and perform control even if the projector is
in a standby state (when the power is off).
Some items cannot be set with a Web browser (but can be from the
Configuration Menu) and some items can only be set with a Web browser.
Items in the Configuration Menu that cannot be set with a Web browser
All items in the projector's Configuration Menu can be set except for the
following.
Settings Menu - Pointer Shape
Settings Menu - Pattern
Settings Menu - User Button
Extended Menu - Saving User's Logo
Extended Menu - Language
Extended Menu - Operation - High Altitude Mode
Reset Menu - Reset All, and Reset Lamp Hours
Password Protect Menu
The items available in each menu are the same as the Configuration Menu
of the projector.
s "List of Functions" p.74
Items that can only be set with a Web browser
The following items can only be set with a Web browser. They cannot be
set from the Configuration Menu.
Network settings- Others - SNMP - Community Name
Network settings- Basic - Monitor Password
Displaying Web Control
Use the following procedure to display Web Control.
q
If your Web browser is set to connect via a proxy server, Web Control
cannot be displayed. To display Web Control, you need to make
settings so that a proxy server is not used for a connection.
Entering the IP address of the projector
When you are using Advanced Connection Mode, you can open Web
Control by specifying the IP address of the projector as follows.
Procedure
A
Start the Web browser on the computer.
B
Enter the IP address of the projector in the address input box
of the Web browser, and press the Enter key on the computer's
keyboard.
Web Control is displayed.
When Web Control Password is set from the Network menu in the
Configuration Menu, a screen for entering the password is displayed.
Enter the characters set for the Web Control Password.
Changing Settings Using a Web Browser (Web Control)
63
63

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Forenregeln
1

Forum

epson-eb-450w

Suche zurücksetzen

  • Wie funktioniert die Zufallswiedergabe bei Verwendung eines Sticks beim Epson EB -W80d? Eingereicht am 9-8-2018 20:48

    Antworten Frage melden
  • Beim Einschalten blinkt die grüne Lampe. Lampe wurde gewechselt und funktionierte. Lampenstundenzäher wurde auf 0 gesetzt. Welchen Grund? Eingereicht am 12-7-2017 09:45

    Antworten Frage melden
  • Lampe gewechselt, grüne Lampe blinkt und Beamer schaltet nicht ein Eingereicht am 12-7-2017 08:50

    Antworten Frage melden

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Art des Missbrauchs:

Zum Beispiel antisemitische Inhalte, rassistische Inhalte oder Material, das zu einer Gewalttat führen könnte.

Beispielsweise eine Kreditkartennummer, persönliche Identifikationsnummer oder unveröffentlichte Privatadresse. Beachten Sie, dass E-Mail-Adressen und der vollständige Name nicht als private Informationen angesehen werden.

Forenregeln

Um zu sinnvolle Fragen zu kommen halten Sie sich bitte an folgende Spielregeln:

Neu registrieren

Registrieren auf E - Mails für Epson eb 450w wenn:


Sie erhalten eine E-Mail, um sich für eine oder beide Optionen anzumelden.


Andere Handbücher von Epson eb 450w

Epson eb 450w Installationsanweisung - Englisch - 21 seiten

Epson eb 450w Bedienungsanleitung - Holländisch - 158 seiten


Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Wenn Sie innerhalb von 15 Minuten keine E-Mail mit dem Handbuch erhalten haben, kann es sein, dass Sie eine falsche E-Mail-Adresse eingegeben haben oder dass Ihr ISP eine maximale Größe eingestellt hat, um E-Mails zu erhalten, die kleiner als die Größe des Handbuchs sind.

Ihre Frage wurde zu diesem Forum hinzugefügt

Möchten Sie eine E-Mail erhalten, wenn neue Antworten und Fragen veröffentlicht werden? Geben Sie bitte Ihre Email-Adresse ein.



Info