216264
101
Zoom out
Zoom in
Vorherige Seite
1/153
Nächste Seite
Check Remedy
Is the computer set for dual display?
Only when projecting computer images
If dual display is activated in "Display Properties" from the computer's Control panel, only approximately half of the
image on the computer screen is projected. To display the entire image on the computer screen, turn off the dual display
setting.
s
Computer's video driver documentation
Is the correct resolution selected?
Only when projecting computer images
Set the computer so that the signals being output are compatible with the projector.
s "List of Supported Resolutions" p.119 s Computer's documentation
Image colors are not right
Check Remedy
Do the input signal settings match the signals from the connected
device?
Change the following settings according to the signal for the connected equipment.
When the image is from equipment connected to the Computer input port s Signal menu - Input Signal p.75
When the image is from equipment connected to the Video or S-Video input port
s
Signal menu - Video Signal
p.75
Is the image brightness adjusted correctly? Adjust Brightness in the Configuration Menu. s Image menu - Brightness p.74
Are the cables connected correctly? Check that all the cables required for projection are securely connected. s Quick Start Guide
Is
Contrast
g
adjusted correctly? Adjust the Contrast in the Configuration Menu. s Image Menu - Contrast p.74
Is color adjustment set to an appropriate value? Adjust Color Adjustment in the Configuration Menu. s Image Menu - Color Adjustment p.74
Are the color saturation and tint adjusted correctly?
Only when projecting images from a video source
Adjust Color Saturation and Tint in the Configuration Menu. s Image Menu - Color Saturation and Tint p.74
Images appear dark
Check Remedy
Is the image brightness set correctly? Adjust Brightness and Power Consumption from the Configuration Menu.
s Image Menu - Brightness p.74 s Settings Menu - Power Consumption p.76
Is the
contrast
g
adjusted correctly? Adjust Contrast from the Configuration Menu.
s Image Menu - Contrast p.74
Is it time to replace the lamp? When the lamp is nearly ready for replacement, the images become darker and the color quality declines. Replace the
lamp with a new one. s p.111
Problem Solving
101
101

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Forenregeln
1

Forum

epson-eb-450w

Suche zurücksetzen

  • Wie funktioniert die Zufallswiedergabe bei Verwendung eines Sticks beim Epson EB -W80d? Eingereicht am 9-8-2018 20:48

    Antworten Frage melden
  • Beim Einschalten blinkt die grüne Lampe. Lampe wurde gewechselt und funktionierte. Lampenstundenzäher wurde auf 0 gesetzt. Welchen Grund? Eingereicht am 12-7-2017 09:45

    Antworten Frage melden
  • Lampe gewechselt, grüne Lampe blinkt und Beamer schaltet nicht ein Eingereicht am 12-7-2017 08:50

    Antworten Frage melden

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Art des Missbrauchs:

Zum Beispiel antisemitische Inhalte, rassistische Inhalte oder Material, das zu einer Gewalttat führen könnte.

Beispielsweise eine Kreditkartennummer, persönliche Identifikationsnummer oder unveröffentlichte Privatadresse. Beachten Sie, dass E-Mail-Adressen und der vollständige Name nicht als private Informationen angesehen werden.

Forenregeln

Um zu sinnvolle Fragen zu kommen halten Sie sich bitte an folgende Spielregeln:

Neu registrieren

Registrieren auf E - Mails für Epson eb 450w wenn:


Sie erhalten eine E-Mail, um sich für eine oder beide Optionen anzumelden.


Andere Handbücher von Epson eb 450w

Epson eb 450w Installationsanweisung - Englisch - 21 seiten

Epson eb 450w Bedienungsanleitung - Holländisch - 158 seiten


Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Wenn Sie innerhalb von 15 Minuten keine E-Mail mit dem Handbuch erhalten haben, kann es sein, dass Sie eine falsche E-Mail-Adresse eingegeben haben oder dass Ihr ISP eine maximale Größe eingestellt hat, um E-Mails zu erhalten, die kleiner als die Größe des Handbuchs sind.

Ihre Frage wurde zu diesem Forum hinzugefügt

Möchten Sie eine E-Mail erhalten, wenn neue Antworten und Fragen veröffentlicht werden? Geben Sie bitte Ihre Email-Adresse ein.



Info