Bedienungsanleitung Epson EB Z8000WU (Seite 35 von 130) (Englisch)

543654

Zoom out

Zoom in

Vorherige Seite

1/130

Nächste Seite

When multiple projectors are lined up and projecting images, you can

manually correct the brightness and color tone of each projector's image

so that the colors projected from each projector match closely.

Use the multi-screen color adjustment function when the Color Mode

of each projector is set to the same item.

In some cases the brightness and color tone may not match completely

even after correction.

Auto Iris does not work while this function is activated. Even if Auto

Iris is set to On, and Multi-screen is set to On, Auto Iris does not work.

Summary of Correction Procedure

When multiple projectors are set up and you need to make corrections,

use the following procedure to correct one projector at a time.

1. Set the projector ID and the remote control ID.

To limit operation to one target projector, set a Projector ID for the target

projector, and set the same ID for the remote control. s p.32

2. Correct the color difference.

You can carry out color correction when projecting from multiple projectors.

You can adjust from black to white in five stages called levels 1 to 5, and in each

of these 5 levels you can adjust the following two points.

• Correcting brightness

You can correct the image brightness to make them all equal.

• Correcting color

You can adjust the image color to make them match more closely by us-

ing Color Correct. (G/R) and Color Correct. (B/Y).

Correction Method

After setting up the projectors, correct the brightness and tone for each

projector to reduce the differences.

Procedure

Press the [Menu] button and select Extended - "Multi-screen"

from the configuration menu.

s "Using the Configuration

Menu"

Set "Multi-screen" to "On".

Select Lv. to be corrected in Adjustment Level.

• Each time a level is selected, the pattern of the level selected is

displayed.

• You can start correcting from any level, usually you can make

it darker or lighter by correcting 1 to 5 or 5 to 1.

Correct the brightness with Brightness Correct.

• When you select Lv. 5, all the images are adjusted to the

darkest image from multiple projectors.

• When you select Lv. 1, all the images are adjusted to the

brightest image from multiple projectors.

• When you select Lv. 2 to 4, all the images are adjusted to the

mid-range brightness image from multiple projectors.

• Because each time the [Enter] button is pressed the image

displayed changes between the pattern display and the actual

image, you can check the correction results and make

corrections in the actual image.

Correcting Color Correct. (G/R) and Color Correct. (B/Y).

Because each time the [Enter] button is pressed the image

displayed changes between the pattern display and the actual

Correcting Color for Multiple Projectors (Multi-Screen Color Adjustment)

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Epson EB Z8000WU Seite 35

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info