543654
89
Zoom out
Zoom in
Vorherige Seite
1/130
Nächste Seite
Replacing the Lamp
Lamp replacement period
It is time to replace the lamp when:
The message "Replace the lamp." is displayed at the lower left of the
projection screen when you start projecting.
The lamp indicator flashes orange.
Replace the lamp indicated by the flashing indicator, either lamp 1 or
2.
The projected image gets darker or starts to deteriorate.
Attention
The lamp replacement message is set to appear after the following time
periods in order to maintain the initial brightness and quality of the
projected images.
s
p.48
When using Power Consumption continually at Normal: About 2400 hours
When using Power Consumption continually at ECO: About 3400 hours
Do not turn the projector on immediately after turning it off. Turning the
projector on and off frequently may shorten the life of the lamps.
If you continue to use the lamp after the replacement period has passed,
the possibility that the lamp may explode increases. When the lamp
replacement message appears, replace the lamp with a new one as soon as
possible, even if it is still working.
Depending on the characteristics of the lamp and the way it has been
used, the lamp may become darker or stop working before the lamp
warning message appears. You should always have two spare lamp units
ready in case they are needed.
How to replace the lamp
The lamp can be replaced even when the projector is suspended from a
ceiling.
Warning
When replacing the lamps because they have stopped illuminating, there is
a possibility that the lamp may be broken. If replacing the lamp of a
projector which has been installed on the ceiling, you should always
assume that the lamp is broken, and you should stand to the side of the
lamp cover, not underneath it. Remove the lamp cover gently.
Never disassemble or remodel the lamp. If a remodeled or reassembled
lamp is installed into the projector and used, it could cause a fire, electric
shock, or an accident.
Replacing Consumables
89
89

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Forenregeln

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Art des Missbrauchs:

Zum Beispiel antisemitische Inhalte, rassistische Inhalte oder Material, das zu einer Gewalttat führen könnte.

Beispielsweise eine Kreditkartennummer, persönliche Identifikationsnummer oder unveröffentlichte Privatadresse. Beachten Sie, dass E-Mail-Adressen und der vollständige Name nicht als private Informationen angesehen werden.

Forenregeln

Um zu sinnvolle Fragen zu kommen halten Sie sich bitte an folgende Spielregeln:

Neu registrieren

Registrieren auf E - Mails für Epson EB Z8000WU wenn:


Sie erhalten eine E-Mail, um sich für eine oder beide Optionen anzumelden.


Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Wenn Sie innerhalb von 15 Minuten keine E-Mail mit dem Handbuch erhalten haben, kann es sein, dass Sie eine falsche E-Mail-Adresse eingegeben haben oder dass Ihr ISP eine maximale Größe eingestellt hat, um E-Mails zu erhalten, die kleiner als die Größe des Handbuchs sind.

Ihre Frage wurde zu diesem Forum hinzugefügt

Möchten Sie eine E-Mail erhalten, wenn neue Antworten und Fragen veröffentlicht werden? Geben Sie bitte Ihre Email-Adresse ein.



Info