215208
14
Zoom out
Zoom in
Vorherige Seite
1/16
Nächste Seite
Adapters
(commercially-
available)
Computer
cable or
VGA-HD15
PC cable
(accessory or
optional)
RGB video
cable
(commercially-
available)
Component
video cable
(commercially-
available)
S- Video
cable
(commercially-
available)
RCA video
cable
(commercially-
available)
(RCA pin jack (yellow))
To video
output port
(Mini DIN 4-pin)
To S-Video
output port
(RCA pin jack × 3
(red, green, blue))
To component video
output ports
(3BNC)
To RGB
output ports
(Mini D-Sub 15-pin)
To RGB
output port
To audio
output port
RCA audio cable
(commercially-
available)
Audio cable
(accessory)
To audio output port
Connecting to video
equipment
Lamp cover is
open error./
Lamp timer
failure/Lamp out
Fan related error
/
Sensor error
Internal error
Red
Red
Red
Red
Red
Red
Red
(Temperature) indicator
(Lamp) indicator
(Operation) indicator
Disconnect the power cable from the electrical outlet.
Then contact your dealer or the nearest address provided in the "International Warranty
Conditions" section of the
Safety Instructions/World Wide Warranty Terms
booklet.
Check if the lamp is broken.
Disconnect the power plug from the electrical outlet and wait for the lamp to cool down
sufficiently (takes about one hour) before checking.
User's Guide "Replacing the Lamp"
User's Guide
"Reading the Indicators"
The projector is provided with indicators to notify you of
the operating status of the projector.
The following tables show what the indicators mean
and how to remedy the problems that they indicate.
If the indicator is flashing or lit red
Problem/Warning
Reading the indicators
lit flashing off
If the problem is still not solved after the lamp is
replaced, stop using the projector and disconnect
the power cable from the electrical outlet. Then
contact your dealer or the nearest address
provided in the "International Warranty Conditions"
section of the
Safety Instructions/World Wide
Warranty Terms
booklet.
Replace the
lamp and
then turn the
power on.
If the lamp
still does not
turn on,
replace it with
a new lamp.
Contact your local dealer for further advice.
If the lamp is
not broken
If the lamp is
broken
The [Audio] port to use is
the port that is in the same
box as the port being used
to input the video signals.
* An accessory audio cable
is not supplied with the
EMP-9300. Use a
commercially-available
audio cable instead.
9300E-QRG_02-13
14

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Forenregeln

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Art des Missbrauchs:

Zum Beispiel antisemitische Inhalte, rassistische Inhalte oder Material, das zu einer Gewalttat führen könnte.

Beispielsweise eine Kreditkartennummer, persönliche Identifikationsnummer oder unveröffentlichte Privatadresse. Beachten Sie, dass E-Mail-Adressen und der vollständige Name nicht als private Informationen angesehen werden.

Forenregeln

Um zu sinnvolle Fragen zu kommen halten Sie sich bitte an folgende Spielregeln:

Neu registrieren

Registrieren auf E - Mails für Epson emp 8300 lcd projector wenn:


Sie erhalten eine E-Mail, um sich für eine oder beide Optionen anzumelden.


Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Wenn Sie innerhalb von 15 Minuten keine E-Mail mit dem Handbuch erhalten haben, kann es sein, dass Sie eine falsche E-Mail-Adresse eingegeben haben oder dass Ihr ISP eine maximale Größe eingestellt hat, um E-Mails zu erhalten, die kleiner als die Größe des Handbuchs sind.

Ihre Frage wurde zu diesem Forum hinzugefügt

Möchten Sie eine E-Mail erhalten, wenn neue Antworten und Fragen veröffentlicht werden? Geben Sie bitte Ihre Email-Adresse ein.



Info