Bedienungsanleitung Epson Stylus C66 (Seite 9 von 10) (Englisch)

58856

Zoom out

Zoom in

Vorherige Seite

1/10

Nächste Seite

EPSON Stylus C66

3/04 EPSON Stylus C66 - 9

9. Look at the alignment sheet and select the pattern with no

gap or line between the rectangles. Enter the number for

that pattern in the corresponding box on the screen and

click

Next.

If you can’t find an aligned pattern, choose the one that

looks the best. Then click

Realignment to print another

test page and repeat this step.

10. Click

Print to print a black horizontal alignment sheet.Look

at the alignment sheet and select the pattern with no gap or

line between the rectangles. Enter the number for that

pattern in the corresponding box on the screen and click

Next.

If you can’t find an aligned pattern, choose the one that

looks the best. Then click

Realignment to print another

test page and repeat this step.

11. Click

Finish to close the Print Head Alignment Utility.

Cleaning the Printer

To keep your printer working at its best, you should clean it

several times a year.

1. Turn off the printer, unplug the power cord, and

disconnect the printer cable.

2. Remove all paper, then use a soft brush to clean any dust or

dirt from the sheet feeder.

3. If the outer case or inside of the sheet feeder is dirty, clean it

with a soft cloth dampened with a mild detergent. Keep the

printer cover closed to prevent water from getting inside.

4. If ink accidentally gets inside the printer, wipe it off with a

damp cloth.

Warning:

Don’t touch the gears inside the printer.

Caution:

Never use a hard or abrasive brush, alcohol, or paint thinner for

cleaning; they can damage the printer components and case.

Don’t get water on the printer components and don’t spray

lubricants or oils inside the printer.

Transporting the Printer

If you need to ship your printer, you must prepare it for

transportation in its original box or one of a similar size.

Caution:

To avoid damage, remove the ink cartridges when transporting the

printer.

1. Turn on the printer.

2. Remove any paper from the printer, then remove the paper

support.

3. Press the H ink button. The print head moves to the ink

cartridge replacement position, and the P power light

begins to flash.

4. Open the printer cover.

5. Open the cartridge cover.

6. Pinch the back tabs of the cartridges as you lift them out of

the printer.

Warning:

If ink gets on your hands, wash them thoroughly with soap and

water. If ink gets in your eyes, flush them immediately with

water.

7. Close the cartridge cover and press the ink button. Wait

until the print head locks in the far right position, then turn

off the printer.

8. Unplug the power cord from the electrical outlet. Then

disconnect the printer cable from the printer.

9. Remove any paper from the printer and remove the paper

support.

10. Open the printer cover and secure the ink cartridge holder

to the case with tape.

Caution:

Be sure to remove the tape after installing the printer in its new

location.

11. Close the printer cover, push in the output tray extension,

then close the output tray.

Clean

here

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Epson Stylus C66 Seite 9

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Andere Handbücher von Epson Stylus C66

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info