Bedienungsanleitung Epson Stylus Photo RX600 (Seite 1 von 1) (Englisch)

58846

Zoom out

Zoom in

Vorherige Seite

1/1

Nächste Seite

Cautions and Notes

cCautions must be observed to avoid damage to your equipment.

Notes contain important information and useful tips on the operation of this product.

Unpacking

Make sure the following parts are included and not damaged.

Removing the Protective Material

1. Open the scanner unit.

2. Remove the tapes and take out the protective material,

then put it in a safe place for future use.

Unlocking

Open the document cover and slide the transportation

lock lever.

Attaching the Parts

1. Attach the paper support.

2. Connect the document cover’s cable to

the TPU interface connector.

Turning On

Plug in the power cord and press the P On button

to turn on this product.

Note:

Do not connect this product to your computer

before step , or you will fail to install the

software.

Installing Ink Cartridges

1. Open the scanner unit.

2. Open the cartridge cover.

power cord

paper support

ink cartridges

The contents may vary in certain locations.

The power cord comes attached in some countries. CD-ROM

film holder

3. Remove an ink cartridge from its

package.

4. Place all the cartridge into its holder.

5. Then, push the ink cartridge down until it

clicks into place and close the cartridge

cover.

6. Lower the scanner unit.

Ink charging starts and it takes about two minutes to complete.

Initial charge. Charging. Please wait. appears on the LCD panel and this product

produces a variety of mechanical sounds. This is normal.

cCaution:

❏Never turn off this product during the ink charging process.

❏Do not load paper until ink charging is complete.

Selecting a Language

1. Press the Setup button.

2. Select Language by using the u/d buttons and press the OK button.

3. Use the l/r buttons to select a language and press the OK button.

Menu items appear in the selected language.

Loading Paper

1. Open the output tray.

2. Move the feeder guard towards you.

3. While holding down the edge guide

locking tab, slide out the edge guide.

4. Load the stack of paper with the printable side facing down and resting against the

guide of feeder guard.

5. Stand the stack of paper against the paper support, then move the feeder guard back.

Now you are ready to use this product as a stand-alone device. See the next section to

learn how to make a test copy. If you want to install software, see “Connecting to Your

Computer” on this sheet.

Making Copies

1. Place a document on the document table.

2. Press the Copy button to enter the Copy Mode.

123

feeder guard

guide

3. Use the l/r buttons to set the number of copies.

4. Press the x B&W button (to copy in grayscale), or the

x Color button (to copy in color).

This product starts Copying.

cCaution:

Do not open the scanner unit during scanning

or copying; otherwise, you may damage this

product.

This product has a variety of copy functions. See “Features” on this sheet or Basic

Operation Guide. To use this product with your computer, see next step.

Connecting to your Computer

1. Press the P On button to turn off this product.

2. Connect the USB cable to your computer.

Installing the Software

Note:

If your CD is labeled “Multilingual CD”, you must install the English software from the

English CD first. Next, install your preferred language addition from the Multilingual CD.

For Windows

1. Make sure this product is connected and turned off, then insert the software CD.

2. Turn off all virus protection programs and then click Continue.

3. Read the license agreement. If you agree with the terms, click Agree.

4. Click Install, and then follow the onscreen

instructions.

5. When you see this screen, turn on this product and

wait until the screen disappears. Then follow the

onscreen instructions. Note that EPSON Smart Panel

is installed in several steps.

6. Click Exit or Restart Now on the final screen, then remove the CD-ROM.

Now you are ready to scan and print. See the Reference Guide for instructions.

For Mac OS 8.6 to 9.X

1. Make sure this product is connected and turned off, then insert the software CD.

2. Double-click the icon in the software CD after inserting it.

3. Follow steps 2 to 6 in “Installing the software for Windows”.

4. Open Chooser from the Apple menu.

5. Select SP RX600 Series and your USB port, and then

close Chooser.

Now you are ready to scan and print. See the Reference

Guide for instructions.

For Mac OS X

1. Make sure this product is connected turned off, then insert the software CD.

Note:

❏This software does not support the UNIX File System (UFS) for Mac OS X. Install the

software on a disk or in a partition that does not use UFS.

❏This product does not support the Mac OS X Classic environment.

2. Open the Mac OS X folder and then double-click the icon after inserting the

software CD.

3. Follow steps 2 to 6 in “Installing the software for Windows”.

4. Open the Applications folder on your hard drive, and then open the Utilities

folder and double-click Print Center icon.

5. Click Add icon in the Printer List dialog box.

6. Select EPSON USB, click Stylus Photo RX600, and then

select All from the Page Setup pop-up menu. Finally,

click Add.

7. Make sure the Printer List contains the printer options

(margin-type) options, then close the Printer List

dialog box.

Now you are ready to scan and print. See the Reference

Guide for instructions.

Features

This product provides you with a variety of stand-alone functions as outlined in this section.

See the Basic Operation Guide for details.

Printing using an index sheet

You can easily print photos directly from a memory card by filling an index sheet feeling

like developing photos.

Printing from film

You can print photos directly from film by scanning the film and selecting the photo data

with LCD panel.

Copying

Copies can be made with a variety options without connecting to a computer.

Using a Memory Card

The built-in memory card slot allow you to do the followings:

❏Print directly from a memory card.

❏Scan and save an image directly to a memory card.

❏Transfer the data stored on a memory card to your computer. (See the Reference Guide.)

Getting More Information

Getting started (Paper manual)

Reference Guide (Viewing on the computer)

Basic Operation Guide (Viewing on the computer)

BorderFree Small Margin

Poster Repeat

2-up Mirror

Contents Describes in short how you can start using this product in standalone

mode. For full operation details, please refer to the Basic Operation

Guide.

Contents Basic information on printing and scanning, Maintenance and

troubleshooting tips, Technical and customer support information.

How to access Double - click the ESPRX600 Reference Guide icon on the desktop.

Contents Describes how to use this product as a copy machine, change ink

cartridges and check the condition of this product. It also provides

troubleshooting tips and customer support information.

How to access Double - click the ESPRX600 Basic Operation Guide icon on the

desktop.

123

45678910

11 12 13 14 15 16 17

18 19 20 21 22 23 24

25 26 27 28 29 30 31

123

45678910

11 12 13 14 15 16 17

18 19 20 21 22 23 24

25 26 27 28 29 30 31

Setup 4048677-00

XXX

Epson Stylus Photo RX600 Anleitung

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Andere Handbücher von Epson Stylus Photo RX600

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info