755669
4
Zoom out
Zoom in
Vorherige Seite
1/14
Nächste Seite
04 EN EN 05
Charge the Camera
1. Connect one end of the micro USB cable to the baby camera, and the other end to the power
adapter (5V 1A).
2. Plug the power adapter into a power outlet.
5V/1A
The new baby monitor and camera will set up automatically. You are all set to use the products
after the monitor and camera are fully charged.
ADDING A NEW BABY CAMERA TO THE
BABY MONITOR
The baby camera and baby monitor are paired and ready to use right out of the box. Refer to the
following steps when adding extra baby cameras or after resetting a baby camera.
1. Enter menu settings, go to Camera -> Add Camera, then follow the onscreen
instructions to start the pairing.
Add Camera
Delete Camera
Cycle Cameras
Camera Settings
60 Secs
Scanning for new camera
Push the button on the
camera to pair.
1Secs
4
23o
c
06 12 AM
:
2. Press and hold the pairing button on the rear of the camera for 1 second until a notication
prompt is heard.
3. Check the rmware version of the monitor (see image below) to make sure your baby monitor
and camera are running the same, latest rmware version.
Language
Anti-Screen Flicker
Default Settings
Temperature Unit
Sleep Mode
Connect with Us
Night Vision Mode
Time Set
4
06 12 AM
:
Monitor: v x.x.x
Camera: v x.x.x
SN: T8300E0A18370E72
https://www.eufylife.com
United States +1 (800) 988 7973
United Kingdom +44 (0) 1604 936 200
Germany +49 (0) 69 9579 7960
Japan +81 03 4455 7823
support@eufylife.com
To check whether it is the latest version:
1 Visit the website below: https://www.eufylife.com/support/5505/spaceview-baby-monitor
2 If the rmware version is lower than the version shown online (highlighted in green), click the
firmware version to download. The downloaded file includes firmware for both T8300 and
T8321 models, make sure you use the T8321 rmware.
3 Follow the steps in the eufy Security Software Upgrade Guide” video or Firmware
Upgrade Manual to complete rmware upgrade.
Note: The eufy Security Spaceview baby camera can be added to the monitor. Before adding
the camera, make sure SpaceView baby camera is running the same, latest version
with the monitor’s.
Chrome OS is not supported for rmware upgrade.
Before you upgrade rmware, use the provided micro USB cable (1m) to connect the
device needed to your computer.
USING THE BABY MONITOR
When 2 or more cameras are added to the monitor, you can manually switch among cameras by
pressing the monitor’s OK button. Once the camera switch is completed, the icon of the selected
camera will appear on the corner of the baby monitor.
You can also select the Cycle Camera” option. The screen cycles through the list of connected
baby cameras according to the preset intervals.
Note: The monitor will emit a loud noise if placed too close to the camera. This is normal and is
resolved once the camera is moved away from the monitor.
4

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Forenregeln

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Art des Missbrauchs:

Zum Beispiel antisemitische Inhalte, rassistische Inhalte oder Material, das zu einer Gewalttat führen könnte.

Beispielsweise eine Kreditkartennummer, persönliche Identifikationsnummer oder unveröffentlichte Privatadresse. Beachten Sie, dass E-Mail-Adressen und der vollständige Name nicht als private Informationen angesehen werden.

Forenregeln

Um zu sinnvolle Fragen zu kommen halten Sie sich bitte an folgende Spielregeln:

Neu registrieren

Registrieren auf E - Mails für Eufy Video Baby Monitor 720P wenn:


Sie erhalten eine E-Mail, um sich für eine oder beide Optionen anzumelden.


Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Wenn Sie innerhalb von 15 Minuten keine E-Mail mit dem Handbuch erhalten haben, kann es sein, dass Sie eine falsche E-Mail-Adresse eingegeben haben oder dass Ihr ISP eine maximale Größe eingestellt hat, um E-Mails zu erhalten, die kleiner als die Größe des Handbuchs sind.

Ihre Frage wurde zu diesem Forum hinzugefügt

Möchten Sie eine E-Mail erhalten, wenn neue Antworten und Fragen veröffentlicht werden? Geben Sie bitte Ihre Email-Adresse ein.



Info