672575
32
Zoom out
Zoom in
Vorherige Seite
1/36
Nächste Seite
~ 32 ~
is higher than the indoor temperature.
4. Press the ‘Fan’ (C) button (a.b.: I) to control the speed of the fan.
De-humidification
To remove excess humidity from a room.
1. Press the ‘Power (A) button.
2. Press the ‘Mode’ (B) button several times until the ‘de-humidification’ (3) icon lights up. If you are
using the remote control, press button G (de-humidification).
The fan will automatically operate at the lower setting.
Ventilation
In this mode the outdoor unit does not work and the indoor unit ventilates.
1. Press the ‘Power (A) button.
2. Press the ‘Mode’ (B) button several times until the 'ventilate’ (4) icon lights up. If you are using the
remote control, press button L (ventilate).
3. To change the ventilator speed press button C (Fan, or fan speed)
Timer
Use the timer button (H) on the remote control to set the length of time after which a working airco
must switch off, or an inactive airco must switch on.
Setting de-activation time
Setting while the airco is switched on
1. Press the timer button (H) on the remote control the timer light (7) on the display will light up.
2. Set the de-activation time by pressing the D & E buttons. Every time you press the buttons the set
time changes by one hour (max. 24 hours). The display briefly shows how much time has been set,
after which it shows the set temperature again.
You can cancel a set time by returning it to 0 or switching the device off.
Setting the activation time
Setting while the airco is switched off.
Ensure that the plug is in the socket! The airco will resume operation in the last mode used.
1. Press the timer button (H) on the remote control. The time light (7) on the display will light up.
2. Set the activation time by pressing the D & E buttons. Every time you press, the set time changes
by one hour (max. 24 hours). The display briefly shows how much time has been set, after which it
returns to the set temperature. The airco will switch on at the set time.
You can cancel a timer time or switch the device off by pressing the timer button H twice.
32

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Forenregeln
1

Forum

eurom-ac7000

Suche zurücksetzen

  • Befüllen von Kältemittel an eurom ac 7000
    Wie wird gemacht und wieviel Kälte Mittel muss rein? Eingereicht am 9-8-2021 16:44

    Antworten Frage melden

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Art des Missbrauchs:

Zum Beispiel antisemitische Inhalte, rassistische Inhalte oder Material, das zu einer Gewalttat führen könnte.

Beispielsweise eine Kreditkartennummer, persönliche Identifikationsnummer oder unveröffentlichte Privatadresse. Beachten Sie, dass E-Mail-Adressen und der vollständige Name nicht als private Informationen angesehen werden.

Forenregeln

Um zu sinnvolle Fragen zu kommen halten Sie sich bitte an folgende Spielregeln:

Neu registrieren

Registrieren auf E - Mails für Eurom AC7000 wenn:


Sie erhalten eine E-Mail, um sich für eine oder beide Optionen anzumelden.


Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Wenn Sie innerhalb von 15 Minuten keine E-Mail mit dem Handbuch erhalten haben, kann es sein, dass Sie eine falsche E-Mail-Adresse eingegeben haben oder dass Ihr ISP eine maximale Größe eingestellt hat, um E-Mails zu erhalten, die kleiner als die Größe des Handbuchs sind.

Ihre Frage wurde zu diesem Forum hinzugefügt

Möchten Sie eine E-Mail erhalten, wenn neue Antworten und Fragen veröffentlicht werden? Geben Sie bitte Ihre Email-Adresse ein.



Info