Bedienungsanleitung Eurom Force 1400 (Seite 17 von 28) (Deutsch, Englisch, Holländisch, Französisch)

509992

Zoom out

Zoom in

Vorherige Seite

1/28

Nächste Seite

The safety regulations specified elsewhere in this booklet must be taken into account at all times in order

to prevent damage to the machine and the surface to be cleaned and personal injury.

ASSEMBLY

 Place the cleaner as close as possible to the water supply.

 The cleaner must be placed upright on a robust, flat and

horizontal surface (handle on top).

 Insert the end of the lance extension completely into the handle

(A) and secure it with a quarter turn (B). Then fasten the

connection by tightening the coupling nut. See diagram 1.

 Fasten the jet lance to the lance extension by inserting the end

of the jet lance completely into the lance extension and

securing it with a quarter turn.

 The Force 1400 also has a turbo-lance as standard, which can

be used instead of the normal jet lance if desired.

 Connect the handle to the high-pressure hose. See diagram2.

 Connect the high-pressure hose to the water inlet of the

machine.

 Fasten the female quick-lock to the water supply hose and then

connect them to the water inlet of the machine. The (not

supplied) water supply hose must have a minimum diameter of

13 mm (1/2”) and be reinforced.

Attention!

 The water supply must supply at least the water consumption of the machine (330 l/h)! The pump

must always be supplied with sufficient water. ’Dry operation’ causes damage.

 The water temperature may not exceed 40°C. The pressure of the water supplied may not exceed

0.7 MPA (7 bar).

 Only use clean water with this machine. Impurities or aggressive chemicals damage the machine!

OPERATION

 Turn the On/Off switch to the OFF/O (Off) position.

 Check that the specifications of the socket that you wish to use correspond with those on the type

plate of the machine. If this is the case, insert the plug into the socket.

 Open the water supply completely.

 Unlock the safety lock under the handle.

 Now squeeze the trigger for several seconds in order to de-aerate the hose.

 Switch the machine on by switching the On/Off button to I/ON. The motor will start briefly, but will

stop again as long as the trigger is not squeezed.

 Now squeeze the trigger – the machine will start.

 The automatic start/stop system means that the motor only works when the trigger is

squeezed.

 The jet produced by the jet lance can be adjusted from narrow to wide by turning the head of the

lance. Never do this while spraying!

 The turbo-lance (Force1400) creates a narrow rotating jet.

TIPS FOR USE

 When the water jet leaves the nozzle it causes the handle to recoil. You must therefore ensure that

you are standing in a stable position and have a firm grip. Also ensure that the high pressure of the

water jet does not cause objects to move out of place or fall or fly around and cause damage. Also

select a safe location for yourself!

 Keep your work environment clean and tidy.

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Eurom Force 1400 Seite 17

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info