45. Release the residual pressure by squeezing the trigger a bit before
you disconnect the hose from the product.
46. Before each time you use the machine and at regular intervals,
check whether all the metal fasteners are sitting well and whether
the components of the product are in good condition; inspect for
broken or worn-out parts.
47. Additional risks:
- Even if you use this product in compliance with all the safety
requirements, there are still potential risks related to injuries and
damage. The following dangers could occur with regard to the
structure and design of this product:
- Health deficiencies that result from vibrations if the product is used
for long periods, inadequately operated and not maintained
properly.
- Danger of injury and material damage from flying objects
- Wounds and damage to property, as a result of broken accessories
or sudden impact from concealed objects during use.
Safety provisions
1. Safety systems are for the purpose of protecting the user and may
not be altered.
2. The ON/OFF switch prevents unintended operation of the machine.
3. The spray gun is equipped with a lock. This lock locks the gun and
prevents unintended engagement of the machine.
4. As soon as the trigger of the spray gun is loosened, the pressure
switch switches off the pump and the high-pressure jet stops. The
pump is re-engaged when the trigger is squeezed.
5. The motor is equipped with a thermal protection, which switches off
the motor in case of overheating. In principle, the motor restarts by
itself after it has cooled down sufficiently. However, it is better to
switch off the machine and then wait 5 minutes before re-starting.
Find out why the machine had overheated and then fix the
problem. If it recurs, then do not continue using the machine and
contact your supplier/service provider.
Description
The high-pressure cleaner was developed specifically for domestic use: for cleaning
cars, boats, buildings, terraces, façades, garden equipment, paving stones and
gutters. Do not use the high-pressure cleaner for heavy and/or industrial purposes.
The machine can be used with cold, lukewarm and hot water. Do not use water
hotter than 40°C; this could damage the pump. Also, do not use water that is dirty
