30
13. Prevent foreign objects entering the radiation/ventilation or outlet
openings on the device. This may cause electric shock, fire or
damage.
14. Never leave a working device unattended but switch off and then
remove the plug from the socket. Always remove the plug from the
socket when the unit is not in use! Always remove plug by pulling
on the plug itself; never pull on the electrical cable!
15. Apart from manual use, this device can also be operated via or a
timer. However you operate it, make sure that the safety guidelines
are taken into account at all times! Do not operate the device with
an additional time clock, timer, volume control or any other device
that automatically turns on the device.
16. This device gets hot during use. Never touch the device when it is
on or shortly thereafter; it could burn you.
17. Never operate the device with wet hands.
Who can use the device?
1. Children younger than 3 must be kept out of the vicinity of the
device unless they are continuously supervised.
2. Children between the ages of 3 and 8 may only switch the device
on or off if it is set up or installed at its usual location and they are
supervised or have received instructions regarding the safe use of
the device and understand the corresponding hazards. Children
between the ages of 3 and 8 may not insert the plug into the
socket, adjust the device settings or clean or maintain it.
3. This device can only be used by children from the age of 8 and
elderly persons and persons with diminished physical or mental
capacities or a lack of experience and expertise if they are
supervised or have received instructions regarding the safe use of
the device and understand the corresponding hazards.
4. Children may not clean or maintain the device without supervision.
5. Children may not play with the device.
Warnings for maintenance
1. Keep the device clean. Dust, dirt and/or deposits in the device often
lead to overheating. Ensure that this type of build-up is regularly
removed.
2. Always switch the device off, remove plug from socket and let the
device cool down before you:
- clean the device
- users - maintain the device.
