Bedienungsanleitung Eurotronic SPARmatic Zero S611 (Seite 2 von 3) (Englisch)

565036

Zoom out

Zoom in

Vorherige Seite

1/3

Nächste Seite

Installation

SPARmatic Zero can be quickly and easily moun-

ted on all common valves (see adapter table).

It can be installed without grime and water spots

because the heating circuit is not interrupted.

1. Turn the manual thermostat head up

completely, loosen the fastening and

pull the thermostat off of the valve.

2. Use an appropriate adapter, if required,

and push it onto the valve.

3. Screw the connector on the valve

or the adapter.

4. Now, you put SPARmatic Zero on the

connector until it noticeably clicks into place.

Additional information about the different

adapters are provided on page 20 or at:

www.eurotronic.org

Setting heating and economy times

With SPARmatic Zero it is possible to set 4 heating

and 4 economy times per day – one for each day or

one for a block of several days.

TAG1 to TAG7 represent the weekdays from Mon-

day to Sunday. Additionally, the corresponding days

are shown as abbreviation below the menu bar on

the display.

Block construction:

T1–5 = same programme from Monday to Friday

1–6 = same programme from Monday to Saturday

T 1–7 = same programme from Monday to Sunday

➔ For non-programmed days the factory preset

remains active.

Setting of an individual programme:

Press

. Select the menu item with the

Button

or . Press

for Monday is shown on the display.

Select day/block with the Button

or .

Conﬁ rm with

Set the beginning of the 1

heating time (symbol )

with the Button

or . Conﬁ rm with

Set the beginning of the 1

economy time (symbol )

with the Button

or . Conﬁ rm with

➔ In case of a later installation, please switch

in the menu to

before you install the

device. Herewith the installation is facilitated.

Dismounting

➔ In order to dismount SPARmatic Zero press the

releasing device to loosen the locking device.

Now, pull the SPARmatic Zero off of the valve.

Now, if desired, a 2

, 3

or 4

heating/economy

time can be entered.

➔ If you do not want to set a further heating/econo-

my time conﬁ rm „

“ with

The next day for programming is shown on the

display.

➔ If you do not want to enter a further day, leave the

menu with

. If the temperature is shown on

the display the programming is ﬁ nished.

➔ Within the blocks you can also overwrite single

days with differing times.

Setting comfort and economy

temperature

Press

. Select the menu item with the

Button

or . Conﬁ rm with

. Set comfort

temperature with the Button

or . Conﬁ rm with

. Set the economy temperature with the But-

ton

or . Conﬁ rm with

Area

: 8°C, freeze protection function is active

Area

: valve is completely open

Adaptation

Initial installation: Press the button

until

appears on the display so that SPARmatic Zero will

be able to start its adaptation. The device will adapt

itself to the stroke of your valve body. To do this the

valve will now be opened and closed several times

to store the end points.

In some cases this process can take a few minu-

tes. After successful adaptation it returns to normal

mode.

➔ Should adaptation become necessary again,

e.g. if your radiator does not cool down in the

-Position, please press in the menu the

button

until adaptation starts again.

➔ If the mistake

is shown on the display place

SPARmatic Zero onto the radiator valve and

then take the batteries out for a short time in

order to execute a reset.

➔ By the way: Maximum energy saving can be

obtained with an economy temperature which

is about 5 ˚C below the comfort temperature.

Manual operation

With the Button or an adaptation of the room

temperature is possible at any time. In the AUTO-

mode it remains active until the next switch point

is reached. Now, the usual programme becomes

active again.

Further functions

Timer function

The timer function is selected with the timer-button

. With this function an user-deﬁ ned tempera-

ture for a programmable period can be entered.

This can be very useful in case of a party, for ex-

ample. Press

. First, the time for which the

time programme has been deactivated is shown.

Conﬁ rm with

. Now, the desired temperature

can be set. Conﬁ rm with

Basic operating modes

MANU-mode

In the MANU-mode SPARmatic Zero adjusts to the

manually speciﬁ ed temperature.

AUTO-mode

In the AUTO-mode SPARmatic Zero changes bet-

ween to temperatures according to the time pro-

gramme that has been set:

comfort temperature (factory preset 21°C)

economy temperature (factory preset 16°C)

The heating and economy times can be speciﬁ ed

via the adjustable time programme. It is possible

to set 8 switch points (4 heating and 4 economy

times) per day at the most. SPARmatic Zero has

the following factory preset:

Heating time:

Heating with comfort temperature

(factory preset: 1

heating time at 07:00)

Economy time:

lowering to economy temperature

(factory preset: 1

economy time at 22:00)

Offset

If the perceived temperature signiﬁ cantly differs

from the set thermostat temperature a temperature

set up can be executed.

Press

. Select the menu item with the

Button

or . Conﬁ rm with

. The degree

setting

will ﬂ ash on the display. Now, set up

the desired adaptation for the temperature (from -5

up to +5°C) with the Button

or . Conﬁ rm your

entry with

. The temperature display does not

change!

Window function

If you open a window and consequently the tempe-

rature drops signiﬁ cantly, SPARmatic Zero will

automatically close the heating valve in order to

save energy. The display will show

. Afterwards,

SPARmatic Zero will resume normal operation.

For the set up select

in the menu. Conﬁ rm

with

. First, the sensibility is selected with the

Button

or ( = high sensibility, = medi-

um sensibility (factory preset),

= low sensibili-

ty). Conﬁ rm with

. Now, you enter the time (10

min (factory preset) - 60 min) for which the valve

should remain closed. Conﬁ rm with

Eurotronic SPARmatic Zero S611 Seite 2

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Andere Handbücher von Eurotronic SPARmatic Zero S611

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info