Bedienungsanleitung Eurotronic SPARmatic Zero S612 (Seite 3 von 3) (Englisch)

565035

Zoom out

Zoom in

Vorherige Seite

1/3

Nächste Seite

Travel function

For the time you are absent you can select an

individual temperature. After this period the origi-

nally deﬁ ned programme becomes active again.

Press

. Select the menu item . Conﬁ rm

with

(suitcase

appears on the display).

Select with the Button

or the end of the

travel function (= date of the recommencement of

the regular heating times). Conﬁ rm with

. Set

the time and conﬁ rm with the button

. The

signal

appears on the display. Now set the

temperature and conﬁ rm with

. appears

on the display. With

the function can be

deactivated.

Child lock

You can lock SPARmatic Zero to protect the

device from unauthorized activation. Press the

buttons

+ at the same time for about 2

seconds until the signal

appears on the display

in order to lock the device. By using this button

combination again the symbol disappears and

you release the lock.

Help

Problem Cause Solution

Batteries do not have

enough power.

Replace batteries.

Heating

element

does not

warm up.

Is the boiler water

temperature O.K.?

Valve does not open,

is it calciﬁ ed after

the summer pause /

heating pause?

Adjust the temperature of

the boiler water.

Remove the SPARmatic

Zero, move the valve

stem back and forth per

hand or with a tool.

Heating ele-

ment does

not cool

down.

Valve does not close

completely. It may be

that the closing point

of your valve seat has

shifted.

Adapt again (see “Adapt-

ing”) Move the valve stem

several times by hand, it

may be that adaptation is

impossible because your

valve is calciﬁ ed or the

seat no longer performs

its function.

Pressure

piece falls

out (This can

also cause

an E1-error)

Due to an endless-

thread the pressure

piece, which is situ-

ated at the bottom,

can fall out if the

device has not been

afﬁ xed on the valve.

Put in the pressure

piece. The device can be

adapted by pressing the

-point or by remov-

ing and inserting the

batteries. The endless-

thread is rotating now

and ﬁ xes the pressure

piece again. Just install it

to the radiator and adapt

it once again.

By pressing any key the error message will

be deleted in the display and the adapter is

re-started.

Heating pause – Closing the SPARmatic Zero

Press

. Select the menu item with the

Button

or . Conﬁ rm with

. Select

and conﬁ rm with

. Set the temperature on

the display to

. The valve is now closed and

will work without a time programme. The calciﬁ -

cation protection function remains active once a

week. After the heating pause you switch in the

menu to the AUTO-mode and the personally set

programme will be executed again.

LCD standby indicator

Press

. Select the menu item with the

Button

or . Conﬁ rm with

Select

. After about 30 seconds, the LCD indica-

tor switches into standby mode. By pressing

any button, the display will be activated again.

(by removing the battery, standby mode will be

reseted). Increases the battery life time.

Going back to factory preset/All reset

Press

. Select the menu item with the

Button

or . Conﬁ rm with

. ﬂ ashes,

conﬁ rm with

. SPARmatic Zero is reset

again. Now, proceed as described for the initial

operation (see p. 8).

Problem Cause Solution

No adaptation

possible.

SPARmatic Zero is not

installed to the heater.

Is the installation OK?

Install SPARmatic Zero to

the heater.

Valve stroke is too

short.

Open and close the valve

several times manually or

replace the batteries.

Motor movement is

not possible.

Does the valve stem

move freely?

Declaration of Conformity

The Declaration of Conformity is provided at:

www.eurotronic.org

Guarantee

The three-year warranty begins on the day of

purchase. Please keep the receipt as evidence of

purchase in the future. During the guarantee pe-

riod, defective radiator thermostats may be sent

to the service address below. Please ensure suf-

ﬁ cient postage is paid. A new or repaired device

will then be sent to you free of charge. Following

expiry of the guarantee, you may still send the

defective device to the address below for repairs.

Please ensure sufﬁ cient postage is paid. Repairs

carried out after the guarantee period are subject

Freeze protection and calciﬁ cation protection

function are active automatically:

Freeze protection function

If the temperature drops below 6°C, SPARmatic

Zero opens the valve until the temperature again

rises above 8°C. This prevents the radiators from

freezing.

Calciﬁ cation protection function

To prevent radiator valves from calcifying SPAR-

matic Zero is submitted to a calciﬁ cation protec-

tion programme once a week on Friday mornings.

Cleaning and used devices

Cleaning

To clean the SPARmatic Zero use only a dry or

lightly wet cloth. Avoid chemical solvent – it can

probably damage the device.

Used devices

Do not throw old devices and packaging into

the household waste. They can be recycled. You

receive further information at your local govern-

ment.

to a charge. Your legal rights are not affected by

this guarantee.

There is no new warranty period starting when

repairing or replacing the device. Please note

that we only grant warranty on the function of the

device. We will not grant warranty for the interac-

tion between the thermostat and the bottom part

of the valve. The technical data is only valid for

the use of the following valves: Heimeier, Junkers

Landys + Gyr, MNG, Honeywell, Braukmann

(measure of thread M330 x 1,5), Oventrop (M30

x 1,5) Danfoss RA, RAV and RAVL. Please see

the combinations of the devices on our website

(www.eurotronic.org/Adapter list)

EUROtronic does not issue a guarantee when

using the thermostat with valves which are not

mentioned above.

Adapters

Heimeier, Junkers Landys+Gyr, MNG,

Honeywell, Braukmann thread-

measure dimension of M 30x1,5

no adapter

required

Danfoss RAV (accompanying pin

must be plugged on the valve tapped)

Danfoss RA

Danfoss RAVL

Please remove all the connection pieces of the

plastic adapters before you use one of the attached

adapters!

Please completely remove the connection rods

highlighted in grey prior to assembly the adapter.

You can ﬁ nd additional brass adapter models that

are subject to a charge: www.eurotronic.org

+ accompanying

pin, only for RAV!

Eurotronic Technology GmbH

Südweg 1

36396 Steinau-Ulmbach

Telefon: +49 (0) 66 67 / 9 18 47-0

Servicehotline: +49 (0) 66 67 / 9 18 47-17

eMail: info@eurotronic.org

Internet: www.eurotronic.org

*subject to a charge

pack.-no. 900 000 137 1 | Stand: 2013/01

Eurotronic SPARmatic Zero S612 Seite 3

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Andere Handbücher von Eurotronic SPARmatic Zero S612

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info