Bedienungsanleitung EWT BF120TLU-T (Seite 4 von 28) (Deutsch, Englisch, Holländisch, Französisch, Portugiesisch, Spanisch, Polnisch)

460372

Zoom out

Zoom in

Vorherige Seite

1/28

Nächste Seite

Monday to Friday with four ON/OFF program options & Saturday to Sunday with

four ON/OFF program options.

Setting Programmes

This timer allows Block programming. This means you can have four ON/OFF

programs to run daily Monday to Sunday (DLY) or you can have four ON/OFF

programs to run Monday to Friday and another four ON/OFF programs to run

Saturday and Sunday (BLK).

Press the ‘PROGRAM’ key twice to set the programs.

You are now setting the programs starting with ‘Daily ‘ON’ P1.

SETTING P1 ON TIME:

1. To set the hour use the ‘-‘ & ‘+’ buttons. Confirm the hour digit by pressing

‘ENTER’.

2. To set the minutes use the ‘-‘ & ‘+’ buttons. Confirm the minute digit by

pressing ‘ENTER’.

Note: The minutes can only be set in 10 minute blocks in programme ‘MODE’.

SETTING P1 OFF TIME:

3. To set the hour use the ‘-‘ & ‘+’ buttons. Confirm the hour digit by pressing

‘ENTER’.

4. To set the minutes use the ‘-‘ & ‘+’ buttons. Confirm the minute digit by

pressing ‘ENTER’.

Repeat steps 1 to 4 to programme P2, P3 & P4. After programming P4 you

automatically enter the BLOCK programme option. Repeat steps 1 to 4 to

programme P2, P3 & P4. After programming P4 you automatically exit to the

default display.

At any time while programming the timer you can press the ‘PROGRAM’ button to

exit to the default display.

NOTE: You can cycle quickly from weekdays to weekends by pressing the

‘MODE’ button. There are 4 programmable programs each for both weekdays and

weekends.

The Advance Function

When in ‘AUTO’ MODE, if the ‘+’ button is pressed for longer than 2 seconds the

programme will ADVANCE to the next setting programmed and will only revert

back to the program when the subsequent programme time is reached. When the

‘ADVANCE’ function is running the ‘ADVANCE’ segment will be displayed on the

LCD screen. If the ‘-‘ button is pressed when the ‘ADVANCE’ programme is

running the ‘ADVANCE’ feature will be automatically cancelled and the programme

will run as normal.

Note - Timer Memory Back Up Batteries - Once the heater has been left

plugged in with the socket switched on for at least 72 hours the timer’s memory

back up batteries will be fully charged. Once the timer batteries are fully charged,

if there is a power cut or if the heater is disconnected from the mains for less than

six months, then the timer will continue to keep time & the settings in the memory

will remain intact.

If however the timer back up batteries have not been charged fully, or if the

heater is deprived of power for longer than six months, then the time and

the programme settings are likely to be lost and you may therefore need to

reset the time and the programme before using the AUTO MODE again.

Safety

For your safety, this appliance is fitted with a thermal cut-out. In the event that

the product overheats, the cut-out switches the heater off automatically. To bring

the heater back into operation, remove the cause of overheating, then turn off

the electrical supply to the heater for a few minutes.

When the heater has cooled sufficiently reconnect and switch on the heater.

Cleaning and User Maintenance

BEFORE UNDERTAKING CLEANING OR MAINTENANCE WORK ON THE

APPLIANCE IMMEDIATELY DISCONNECT THE ELECTRICITY SUPPLY.

The outside can be cleaned by wiping it over with a soft damp cloth and then

dried. Do not use abrasive cleaning powders or furniture polish as this can

damage the surface finish. Ensure that dust of fluff does not accumulate inside

as this could lead to overheating of the element. Use a vacuum cleaner to

remove any fluff which does accumulate.

Recycling

For electrical products sold within the European Community. At the end

of the electrical products useful life it should not be disposed of with

household waste. Please recycle where facilities exist. Check with

your Local Authority or retailer for recycling advice in your country.

After Sales Service

Should you require after sales service or should you need to purchase any

spares, please contact the retailer from whom the appliance was purchased or

contact the service number relevant to your country on the warranty card.

Please do not return a faulty product to us in the first instance as this may result

in loss or damage and delay in providing you with a satisfactory service.

Please retain your receipt as proof of purchase.

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

EWT BF120TLU-T Seite 4

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info