696313
32
Zoom out
Zoom in
Vorherige Seite
1/36
Nächste Seite
32 ENGLISH
fUMES PROBE
Fumes probe fault. Contact customer service
HOT EXHAUST
High fume temperature
Check the pellet loading (see “Easy Setup”); if the problem persists, contact a
qualied technician
ALL CLEAN CHECK UP
The door is not closed properly.
The ash drawer is not closed properly.
The combustion chamber is dirty.
The fume exhaust duct is blocked.
Check the hermetic closure of the door.
Check the hermetic closure of the ash drawer.
Make sure that the fumes duct, the primary air duct sensor and the combustion
chamber are clean.
NO IGNITION
The pellet hopper is empty.
Pellet loading value inappropriate.
Thermostatic bulbs tripped.
Check for the presence of pellets inside the hopper.
Adjust the pellet ow (see “Easy Setup”).
Check the procedures described in the chapter “Ignition.
Check the bulb thermostats (see the chapter “Reset”)
BLACK OUT
NO IGNITION
No power during the ignition phase
Turn the stove OFF by pressing key 1 and repeat the procedures described in the
chapter “Ignition.
NO PELLET
The pellet hopper is empty.
Pellet not loading.
The gearbox is not loading pellets.
Check for the presence of pellets inside the hopper.
Adjust the pellet ow (see “Easy Setup”).
DEPRESSION ALARM
The door is not closed properly.
The ash drawer is not closed properly.
The combustion chamber is dirty.
The fume exhaust duct is blocked/dirty.
Check the hermetic closure of the door.
Check the hermetic closure of the ash drawer.
Make sure that the fumes duct and the combustion chamber are clean.
DAMAGE DEPR SENSOR
Flow sensor faulty.
Sensor disconnected
Contact customer service
WATER OVERTEMP
Air in the system
Circulation inappropriate
Possible air in the system, bleed the system.
No suitable circulation,.
No safety area or not suitable.
The water inside the stove is above 95°C.
Possible pump fault.
If the problem persists, the reset operations must be performed by an authorised
technician.
* TRAPDOOR BLOCKED
The automatic cleaning of the burning pot is
blocked.
Burning pot dirty/blocked
The door is not closed properly.
Check that the door is closed properly.
Check that the burning pot is free and clean.
The automatic cleaning of the burning pot is blocked.
If the problem persists, contact customer service
MIN H2O PRESSURE
ALARM
The system pressure detected by the pressure
switch is too low.
Possible air in the system, bleed the system.
Possible lack of water or leaks due to faults in some components of the system.
If the problem persists, contact customer service
PROBE H2O
H2O probe fault Contact customer service
MAX H2O PRESSURE
ALARM
The water pressure is above the maximum
threshold
Possible air in the system, bleed the system.
Make sure that the expansion vessels are not damaged or too small
Make sure that the system (cold) is loaded at the right pressure
If the problem persists, contact customer service
* PRESSURE SENSOR
DAMAGED
Pressure dierential sensor faulty, disconnected or
broken
Contact customer service
* AUGER CONTROL
ALARM
Pellet loading not working correctly Contact customer service
* AUGER BLOCKED
Pellet motor not working correctly Contact customer service
* DHW PROBE
Boiler probe fault. Contact customer service
* PUffER TANK PROBE
Boiler probe fault. Contact customer service
* EMPTY HOPPER
The pellet hopper is empty.
The door is not closed properly.
The ash drawer is not closed properly.
The combustion chamber is dirty.
The fume exhaust duct is blocked..
Check for the presence of pellets inside the hopper.
Check the hermetic closure of the door.
Check the hermetic closure of the ash drawer.
Make sure that the fumes duct, the primary air duct sensor and the combustion
chamber are clean.
Contact customer service
* where available.
32

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Forenregeln

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Art des Missbrauchs:

Zum Beispiel antisemitische Inhalte, rassistische Inhalte oder Material, das zu einer Gewalttat führen könnte.

Beispielsweise eine Kreditkartennummer, persönliche Identifikationsnummer oder unveröffentlichte Privatadresse. Beachten Sie, dass E-Mail-Adressen und der vollständige Name nicht als private Informationen angesehen werden.

Forenregeln

Um zu sinnvolle Fragen zu kommen halten Sie sich bitte an folgende Spielregeln:

Neu registrieren

Registrieren auf E - Mails für Extraflame HP15 EVO wenn:


Sie erhalten eine E-Mail, um sich für eine oder beide Optionen anzumelden.


Andere Handbücher von Extraflame HP15 EVO

Extraflame HP15 EVO Bedienungsanleitung - Deutsch - 36 seiten

Extraflame HP15 EVO Bedienungsanleitung - Holländisch - 36 seiten

Extraflame HP15 EVO Bedienungsanleitung - Französisch - 36 seiten


Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Wenn Sie innerhalb von 15 Minuten keine E-Mail mit dem Handbuch erhalten haben, kann es sein, dass Sie eine falsche E-Mail-Adresse eingegeben haben oder dass Ihr ISP eine maximale Größe eingestellt hat, um E-Mails zu erhalten, die kleiner als die Größe des Handbuchs sind.

Ihre Frage wurde zu diesem Forum hinzugefügt

Möchten Sie eine E-Mail erhalten, wenn neue Antworten und Fragen veröffentlicht werden? Geben Sie bitte Ihre Email-Adresse ein.



Info