Bedienungsanleitung Fakir SENIOR (Seite 10 von 12) (Englisch, Türkisch)

566108

Zoom out

Zoom in

Vorherige Seite

1/12

Nächste Seite

Using the hair clipper:

For hair clipper, push the On/Off switch

upwards to the “On” position. It is

recommended that the hair is initially not

trimmed too short.

Choose the transparent cutting length

attachment with lengths between 4, 8, 12,

16 or 20 mm.

Plug the comb attachment onto the side

rails of the housing. An oval retention plate

is located on the underside of the

attachment. Press it with the thumb against

the appliance and at the same time push

the comb attachment into the desired

position. Make sure that the attachment is

always firmly locked in before you start

trimming hair.

If you would like to further shorten the hair,

you can push the comb attachment

downward into another position to repeat

the cutting process.

Thinning function:

Choose the desired comb attachment

length and set the thin-out function with

the top slide (1….0). With this function you

can reduce the volume of hair without

changing the hair length.

Cutting contours and shaving the nape

of the neck:

Remove the cutting length comb from the

appliance. The ceramic and titanium cutter

set permits exact following of the contours

even at points of difficult access and also

clean shaving of the hairline on the nape

of the neck.

After use, switch the hair clipper off by

moving the On/Off switch downwards into

the “Off” position.

Cleaning and Care:

• Unplug the appliance from the mains before

you clean the appliance.

• Never hold the mains adapter unit with wet

hands when plugging it in or unplugging it

from the socket.

• Always keep the mains adapter and

connecting lead dry.

Cleaning with water:

The cutting unit can be easily cleaned under

a running water. Water temperature should

not be more than 70°C.

• Switch the appliance off and pull out the

mains plug from the socket.

• Remove the adjustable cutting length from

the appliance.

• Press the cutters set with the thumb

towards the back, remove it from the holder

and take it off.

• Ensure that the cutting unit does not fall

down.

• Remove remaining hair residue from the

shear head with the enclosed cleaning

brush. The cutter set can also be washed

under flowing water. The ceramic and

titanium blades are stainless steel that can

be washed under the water.

• The appliance can be wiped down but it

must not be immersed in water or any other

liquid as it contains live parts (rechargeable

batteries).

• Once the cutter set is completely dry, insert

it again by guiding the bottom projection of

the cutter set into the housing opening and

firmly pressing the trimmer head until it

audibly latches.

Oiling the trimmer head:

• Ensure that your appliance is switched off

before oiling it.

• Remove the cutting length comb and the

cutter set from the appliance.

• Before oiling, remove any accumulated hair

between the blades using a small brush

and oil the blades with the oil supplied in

accessories.

• Wipe off the excessive oil with a cloth.

• For oiling the trimmer head only use acid

free oil.

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Fakir SENIOR Seite 10

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info