Bedienungsanleitung Felisatti DHF13 (Seite 4 von 32) (Deutsch, Englisch, Französisch, Italienisch, Portugiesisch, Spanisch)

502464

Zoom out

Zoom in

Vorherige Seite

1/32

Nächste Seite

Follow very carefully the instructions in this manual, save it

and keep close at hand, ready to carry out any inspection of

parts that may be necessary.

If the machine is used carefully and normal maintenance is

carried out, it will work well for a long time.

The functions and use of the tool you have bought shall be

only those described in this manual. Any other use of the tool

is strictly forbidden.

ILLUSTRATIONS

DESCRIPTION (See gures)

A Safety screw (Fig.2)

D Machine neck (Fig.2)

E Drill-hammer button (Fig.1)

F Cooling vents (Fig.1)

G Depth stop (Fig.1)

H Auxiliary grip (Fig.1)

I Turn direction lever (Fig.1)

J On-/off switch (Fig.1)

K Retainer button (Fig.1)

L Key-operated drill chuck (Fig.2)

M Drill chuck key (Fig.2)

O Label for reversing rotation R-L (Fig.1)

BRIEF DESCRIPTION

A mechanical percussion unit generates the power necessary

for hammer drilling in stone or concrete.

Use of the tool: These hammer drills can be used for hammer

drilling in stone, drilling in wood, metal as well as plastic,

and also for driving screws with driving bits installed in a key

chuck. Any other use not mentioned is not allowed.

Additional features of the hammer drill:

- Warning! This machine must not be used with hole

saws, core bits, diamond bits, etc, as these tend to jam easily

in the orice and can cause accidents.

- Change direction of rotation with switch lever I due to a

lockout mechanism, switching the lever is only possible if the

On/off switch J is not depressed.

TECHNICAL DATA

- Electronic control of spindle speed, innitely variable by

nger pressure on the On/off switch J.

- For continuous operation the On-/Off switch can be

locked in the “On” position by the button K.

- Adjustable auxiliary handle H, with integral depth gauge

BEFORE USING THIS TOOL

WARNING! Before carrying out any work, check, for instance,

using a metal detector, that there are no electric wires or gas

or water pipes under the surfaces you wish to work on.

Make sure the mains voltage is correct: it must be the same

as that on the specication label. Machines with 230V can

also be connected to a 220V mains supply.

To turn the machine on, press the ON/OFF switch J and keep

it pressed down.

When the ON/OFF switch is released, the machine stops.

WARNING! Always disconnect the plug from the socket

before doing any work on the machine.

1. Drill chuck

These models feature key-operated drill chucks L.

Changing drill chucks (Fig.2)

Quick tting drill chuck

Insert it in the tool and tighten with drill chuck key M uniformly

on each of the three holes.

Remove the drill chuck by opening it all the way and

completely unscrewing screw A.

WARNING: Screw A has lefthand threads.

Hold the shaft at gap C with a wrench and turn the drill chuck

in the opposite direction of operation.

2. Changing the position of the auxiliary handle

1. Unscrew the auxiliary handle H in an anticlockwise

direction.

2. Turn the auxiliary handle H to the required position.

3. Screw the auxiliary handle H in place again.

3. Setting the depth gauge

Make sure before you start that drill-bit is inserted.

1. Hold the bit tip against the work surface. Push the depth

gauge G against the work surface, to the same depth as the

Hammer drill DHF13/580ER DHF13/650ER DHF13/750ER DHF13/780ER

Rated power W 580 600 750 750

No load speed /min 0-3000 0-2800 0-2900 0-2800

Work shaft thread UNF 1/2”x20 1/2”x20 1/2”x20 1/2”x20

Drill chuck capacity mm 1,5…13 1,5…13 1,5…13 1,5…13

Max. steel capacity mm 13 13 13 13

Max. wood capacity mm 20 30 30 30

Max. concrete capacity mm 12 13 13 16

N strikes in load /min. 45000 30000 45000 30000

Acoustic pressure dB(A) 96 93 96 95

Sound-power level dB(A) 107 104 107 106

Vibration acceleration m/s² 18,6 14,7 19,5 14,0

Weight according EPTA-

Procedure 01/2003

Kg. 1,9 2,1 2,3 2,2

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Felisatti DHF13 Seite 4

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info