Bedienungsanleitung Felisatti SGF600 (Seite 3 von 24) (Deutsch, Englisch, Französisch, Italienisch, Portugiesisch, Spanisch)

502486

Zoom out

Zoom in

Vorherige Seite

1/24

Nächste Seite

TECHNICAL DATA

Straight grinder SGF600CE

Input power W 600

No-load speed rpm 12000-26000

Maximum diameter of grinding wheel/disc mm 25

Clip diameter mm 6

pprox. weight (without acces.) Kg. 1.5

The instructions contained in this manual must be strictly

followed, it should be carefully read and kept close at

hand to use when carrying out maintenance on the

indicated parts.

If the machine is used carefully and normal maintenance

is carried out, it will work well for a long time.

The functions and use of the tool you have bought shall

be only those described in this manual. Any other use

of the tool is strictly forbidden.

ILLUSTRATIONS

DESCRIPTION (See figures)

A Start-up switch (Fig.1)

B Clamping nut (Fig.1)

C Speed adjustment (Fig.1)

EQUIPMENT

- Clip, 8 mm

- Fixed spanner 13 mm

- Fixed spanner 17 mm

- Operating instructions

- Safety instructions

- Warranty

SAFETY INSTRUCTIONS

 See “Safety Instructions” manual, supplied with this

instruction manual.

 WARNING! Do not grind material containing amian-

thus. Working with materials containing amian-

thus/asbestos and/or silica stones produces a dust,

which is harmful to health. Protect yourself from inhal-

ing this dust, in compliance with current regulations on

accident prevention.

 For your personal safety, always connect the machine

to a mains supply protected by a differential and ther-

mal cutout switch, in accordance with regulations on

low-voltage wiring sitemaps.

 Do not pierce the motor housing as this could damage

the double insulation (use adhesive labels).

 Check the work area with a metal detector for hidden

wires, gas and/or water pipes.

 Always unplug the machine before carrying out work

on it.

 Always stop the machine by switching it off, not by

unplugging it.

 WARNING! Before each use, inspect the plug and

lead. Should they need replacing, have this done by an

official service centre.

 Always keep the mains lead clear of the working range

of the machine.

 Only plug the machine in when it is switched off.

 Hold the machine firmly in both hands and in a stable

position.

 Verify that the speed marked on the grinding disc or

wheel is equal to or higher than the straight grinder

rated speed.

 Ensure that the grinding disc or wheel dimensions are

compatible with the straight grinder.

 Abrasive grinding wheels or discs must be handled

and stored with care in accordance with the manufac-

turer’s instructions.

 Protect the sanding tool from knocks, blows and grease.

 The grinding disc or wheel must be carefully checked

before being used to ensure that it is not damaged or

cracked. All damaged or cracked grinding discs or

wheels must be immediately replaced.

 All grinding discs and wheels must be carefully

mounted in accordance with the manufacturer’s

instructions.

 The machine should be used for dry cutting and grind-

ing only.

 Check that the disc has been properly fitted and se-

cured before using the machine. Start the machine

with no load and run for 30 seconds in a safe position;

if you notice serious vibration or any other defect stop

the machine immediately. This may be a sign of incor-

rect fitting or a badly balanced disc.

 Ensure that the part to be worked on is firmly secured

before beginning any grinding or cutting operation.

 Never use cutting discs for deburring. Do not subject

cutting discs to lateral pressure.

 Beware of shavings that fly off. Hold the tool that so

that sparks fly away from you or other people and in-

flammable materials.

 When working on stone, use dust extraction equipment

and wear a mask.

 When working with the machine, always wear safety

goggles and ear protection. Other personal protection

equipment such as dust masks, gloves, helmet and

apron should be worn when necessary, along with non-

slip safety footwear. A dust mask is required when the

dust from the material deburred, such as paint or other

coating, is harmful. If in doubt, use safety equipment.

 Make sure the vents are free when working with dust. If

they require cleaning, first unplug the machine, do not

use metal objects and avoid damaging internal parts.

 Do not touch the sanding/grinding tools when rotating.

 WARNING! The wheel keeps moving for a long time

after the machine has been switched off.

BRIEF DESCRIPTION

This straight grinder has been designed to dock, rough

grind or plane metal and stone materials without the

need for a water supply.

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Felisatti SGF600 Seite 3

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info