Bedienungsanleitung Fellowes Galaxy 500 (Seite 5 von 74) (Deutsch, Englisch, Holländisch, Dänisch, Französisch, Italienisch, Portugiesisch, Spanisch, Polnisch, Türkisch, Schwedisch, Norwegisch, Finnisch)

502653

Zoom out

Zoom in

Vorherige Seite

1/74

Nächste Seite

CORRECTING A BOUND DOCUMENT

REMOVAL OF WASTE CLIPPINGS

WORLDWIDE WARRANTY

Fellowes warrants all parts of the binder to be free of defects in material and workmanship

for 2 years from the date of purchase by the original consumer. If any part is found to be

defective during warranty period, your sale and exclusive remedy will be repair or replacement,

at Fellowes’ option and expense, of the defective part. This warranty does not apply in

cases of abuse, mishandling or unauthorised repair. Any implied warranty, including that of

merchantability or ﬁtness for particular purpose, is hereby limited in duration to the appropriate

warranty period set forth above. In no event shall Fellowes be liable for any consequential

damages attributable to this product. This warranty gives you speciﬁc legal rights. You may

have other legal rights that vary from this warranty. The duration, terms and conditions of this

warranty are valid worldwide, except where different limitations, restrictions or conditions may

be required by local law. For more details or to obtain services under this warranty, please

contact Fellowes or your dealer.

TROUBLESHOOTING

Additional sheets may be included or removed at any time by opening and then closing the comb as previously described.

The waste tray is located under the machine and is accessed from each side. For best results empty the tray regularly.

The tray should be emptied after every 50 operations to ensure no blockages occur.

STORAGE

Lower the lid and punch handle. The Galaxy comb binder is designed to be stored horizontally on the desk.

Problem Cause Solution

Punched holes are not central Edge guide not set Adjust edge guide until hole pattern is correct

Machine will not punch Blockage Check waste tray in empty. Check for blockage to paper entry

Punch holes are not parallel to edge Debris is stuck below dies Take stiff cardboard and slide into the paper entry. Move the

cardboard sideways to release any stray clippings into the

waste tray

Partial holes Sheets not correctly aligned to punch pattern Adjust edge guide and test punch scrap sheets until correct

Missing holes Selectable dies are not selected to punch Check the correct dies are selected to punch holes. To select a

die, push selector switch down at the front

Sheets will not turn on the

bound document

Back margin is too large for a smaller comb Select the smaller margin depth for combs up to 18mm (

/16

”)

in diameter (2-150 sheets) Select the larger margin depth for

combs larger than 18mm (

/16

”) in diameter (151-500 sheets)

Damaged hole edges Possibly overloading the machine Punch plastic covers with paper sheets. Reduce number of

sheets being punched

Waste tray leaks Waste tray is not correctly inserted or ‘burst

feature’ has activated

Check waste tray is empty and ‘burst feature’ is closed

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Fellowes Galaxy 500 Seite 5

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info