Bedienungsanleitung Fellowes Lunar laminator (Seite 5 von 52) (Deutsch, Englisch, Holländisch, Dänisch, Französisch, Italienisch, Portugiesisch, Spanisch, Polnisch, Türkisch, Schwedisch, Norwegisch, Finnisch)

502522

Zoom out

Zoom in

Vorherige Seite

1/52

Nächste Seite

Let our experts help you with a solution.

Customer Service...

www.fellowes.com

Always call Fellowes before contacting your place of purchase, see the rear cover for contact details.

Consider registering your machine at www.fellowes.com/register to receive updates and additional information.

NEED HELP?

Switch the power on (located at the front of the machine).

The red ‘Power on’ lamp will light up. The machine is now heating up.

When the machine is ready, the green ‘Ready’ lamp will remain on.

Place the document into the open pouch. Ensure the document is centred

against the sealed edge. Use the appropriate pouch size for the document.

Ensure the pouch enters the machine sealed edge first. Keep the pouch straight

and central within the slot, not on an angle. Use the entry markings as a

guide.

Upon exit, the laminated pouch may be hot and soft. To prevent jamming

remove the pouch immediately. Place pouch on to a flat surface to cool. Take

care when handling a hot pouch.

To release a pouch during lamination, activate the release lever located on the

top of the machine. Gently pull pouch out of machine.

10.

Ensure the machine is on a stable surface.

Check there is enough clear space (min 50cm) behind the machine to allow

items to pass through freely.

Plug the machine into an easily accessible mains socket.

SETTING UP THE LAMINATOR

HOW TO LAMINATE

Switch off the machine at the wall. Allow the machine to cool. The outside of the machine can be cleaned with a damp cloth. Do not use solvents or flammable materials to

polish the machine. Cleaning sheets can be purchased for use with the machine. When the machine is warm – run the sheets through the machine to clean any residue off the

rollers. For optimum performance, it is recommended that cleaning sheets are used with the machine regularly. (Cleaning sheet order codes #5320601)

Problem Possible cause Solution

No ‘power on’ lamp (red LED) Machine not switched on Switch on machine at front and at the wall socket

No ‘ready’ lamp after a long period (green

LED)

Machine is in a hot or humid area Move the machine to a cooler and dry area

Pouch does not completely seal the item Item may be too thick to laminate Check pass through thickness is correctly selected and pass through again

Pouch has waves or bubbles Temperature setting may be incorrect Check pouch thickness is correctly selected and pass through again

Pouch is lost in the machine Pouch is jammed

Select reverse button and pull out the item by hand

Jamming

Pouch was used ‘open end’ first

Pouch was not centred on entry

Pouch was not straight upon entry

Empty pouch was used

Pouch is damaged after lamination Damaged rollers or adhesive on rollers Pass cleaning sheets through the machine to test and clean rollers

TROUBLESHOOTING

STORAGE & CLEANING

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Fellowes Lunar laminator Seite 5

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info