Bedienungsanleitung Fellowes Powershred P-58Cs (Seite 3 von 40) (Deutsch, Englisch, Holländisch, Dänisch, Französisch, Italienisch, Portugiesisch, Spanisch, Polnisch, Türkisch, Schwedisch, Norwegisch, Finnisch)

616393

Zoom out

Zoom in

Vorherige Seite

1/40

Nächste Seite

Set to Off (O) and

plug in

BASIC PRODUCT MAINTENANCE

Set to Auto-On (l)

Hold card at edge

Set to Off (O) and

plug in

Feed into paper entry

and release

Feed into center of

entry and release

Set to Off (O)

and unplug

Set to Off (O)

and unplug

Continuous operation:

3-5 minute maximum

NOTE: Shredder runs briefly

after each pass to clear entry.

Continuous operation beyond

3-5 minutes will trigger a

15-minute cool down period.

Set to Auto-On (I)

Check paper

amount

BASIC SHREDDING OPERATION

*Only use a non-aerosol vegetable oil in long nozzle container such as Fellowes 35250

* Apply oil

across entry

Set to Off (O)

PAPER

CARD

Set to Reverse (R)

2-3 seconds

TROUBLESHOOTING

Paper jam: Set to Off (O), remove shredder head and empty bin. Replace shredder head, and follow any or all of the below procedures.

Alternate slowly back and forthSet to Reverse (R)

for 2-3 seconds

Set to Off (O)

and unplug

Gently pull uncut

paper from paper

entry. Plug in.

Set to Reverse (R)

Indicator lights:

Yellow-SafeSense

active

Yellowflashing-SafeSense

not active

Make sure head is on basket correctly

Wait 15 minutes for motor to cool down

Remove and empty basket

LIMITED PRODUCT WARRANTY

Limited Warranty: Fellowes, Inc. (“Fellowes”) warrants the parts of the machine to be free of defects in

material and workmanship and provides service and support for 2 years from the date of purchase by the

original consumer. Fellowes warrants the cutting blades of the machine to be free from defects in material and

workmanship for 5 years from the date of purchase by the original consumer. If any part is found to be defective

during the warranty period, your sole and exclusive remedy will be repair or replacement, at Fellowes’ option

and expense, of the defective part. This warranty does not apply in cases of abuse, mishandling, failure to comply

with product usage standards, shredder operation using an improper power supply (other than listed on label),

or unauthorized repair. Fellowes reserves the right to charge the consumers for any additional costs incurred by

Fellowes to provide parts or services outside of the country where the shredder is initially sold by an authorized

reseller. ANYIMPLIEDWARRANTY, INCLUDING THAT OFMERCHANTABILITYORFITNESSFORAPARTICULAR

PURPOSE,ISHEREBYLIMITEDINDURATIONTOTHEAPPROPRIATEWARRANTYPERIODSETFORTHABOVE.In

no event shall Fellowes be liable for any consequential or incidental damages attributable to this product. This

warranty gives you specific legal rights. The duration, terms, and conditions of this warranty are valid worldwide,

except where different limitations, restrictions, or conditions may be required by local law. For more details or

to obtain service under this warranty, please contact us or your dealer.

ATTENTION: If the SafeSense

light remains on, you must engage the

Override Switchinordertoperformstepsabove.Oncethejamiscleared,resetthe

SafeSense

feature. (See SafeSense

instructions below.)

Sensor light illuminated–paper

jammed

SafeSense

paper jam: If the SafeSense

feature activates (SafeSense

light remains on) to cause

theusertothinktheshredderhasjammedwhenithasnot,usetheOverride Switch to deactivate

the SafeSense

feature and clear the paper. Warning – when switch is in override position, the

SafeSense

light will flash and the SafeSense

featurewillNOTfunction.Oncethepaperiscleared,

reset the SafeSense

feature.

Disconnect power switch

mustbeinON(I)positionto

operate shredder. Insert waste

bag (Fellowes #36052) for

easy disposal.

SafeSense

override switch

Active Notactive

2 43

3 4

1 3

4 5

All cross-cut shredders require oil for peak

performance. If not oiled, a machine may

experience diminished sheet capacity, intrusive

noise when shredding and could ultimately

stop running. To avoid these problems, we

recommend you oil your shredder each time

you empty your waste bin.

OILING SHREDDER

FOLLOW OILING PROCEDURE BELOW AND REPEAT TWICE

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Fellowes Powershred P-58Cs Seite 3

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info