470119
3
Zoom out
Zoom in
Vorherige Seite
1/4
Nächste Seite
REARPANEL DESCRIPTION
G. TAPE INPUTS: Plug-in connection for any line level
(500mV) stereo or mono signal. This signal is mixed into
the power amp along with the instrument signal from the
preamp. It has fixed gain and is unaffected by any of the
front panel controls; however, the signal will be affected
by any device inserted between the preamp output and
the power amp input. It is useful for patching in a CD, tape
player, rhythm machine or other signal source to be used
as accompaniment for practice or performance. The
output level control of the external signal source is used to
control its own volume while the front panel volume control
is used for the instrument in order to obtain a balance.
H. PREAMP OUT: This jack provides an unbalanced output
signal from the preamp. This output can be used in
conjunction with the POWER AMP IN as a patch point for
external mono effects devices.
I. POWER AMP IN: This unbalanced jack inputs signal
directly to the power amp section. It automatically
disconnects the preamp circuitry when used. This is useful
when using the patch point option or when using the BXR
25 as a slave amplifier for an external signal source.
J. HEADPHONES: This jack provides an output to standard
stereo or mono headphones for private listening. NOTE:
Use of this jack automatically disables the main speaker.
CAUTION: Prolonged listening at high levels may be
hazardous to your hearing!
K. POWER INDICATOR: When this LED is illuminated, the BXR
25 is receiving power.
L. POWER: Turns the BXR 25 on or off.
The front panel contains all items necessary for system
operation and observation. Please read this section of the
manual carefully to make sure you understand all the
operational features of your new FENDER BXR 25
amplifier.
A. Input 1: High gain
B. Input 2: Low gain
The high gain input (INPUT 1 ) should be used for most
instruments. This input can handle as much as 3.5 volts
R.M.S., while the low gain input (INPUT 2) accepts 7 volts
R.M.S. without audible distortion. For both cases, this is
greater than any active bass with a 9 volt battery can
produce. If you are using a bass with dual 9 volt batteries
or a "hot" passive bass, it might be wise to try INPUT 2.
For the rare case where two players want to use one
amplifier or where two instruments are to be used during
the performance, both inputs may be used.
C. VOLUME: This control sets the gain of the preamp and
serves as an adjustment for the "loudness" of the amplifier.
D. LOW: adjusts the low frequency part of the spectrum, the
area where the "deep” fundamentals reside.
E. MID: adjusts the mid frequency part of the spectrum.
Turning the mid down will cause the sound to become
"TIGHT" or more "PUNCHY."
F. HIGH: adjusts the high frequency part of the spectrum.
Turning the HIGH up will cause the sound to become
"BRIGHT" or more "CRISP".
INPUT POWER: This tells you how much AC power (75 Watts)
the amplifier can "draw" from the wall socket when the
amplifier is at full power. The marking directly below tells you
what the the wall socket Voltage and Frequency must be.
Incorrect line voltage will damage your amplifier and VOID
THE WARRANTY.
LINE CORD: The line cord should be connected to a suitable
power source, with the correct voltage and frequency, as
shown in the INPUT POWER at the amplifier rear. If you are
not sure, check some other piece of equipment in your area.
DO NOT ALTER THE AC PLUG.
3

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Forenregeln

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Art des Missbrauchs:

Zum Beispiel antisemitische Inhalte, rassistische Inhalte oder Material, das zu einer Gewalttat führen könnte.

Beispielsweise eine Kreditkartennummer, persönliche Identifikationsnummer oder unveröffentlichte Privatadresse. Beachten Sie, dass E-Mail-Adressen und der vollständige Name nicht als private Informationen angesehen werden.

Forenregeln

Um zu sinnvolle Fragen zu kommen halten Sie sich bitte an folgende Spielregeln:

Neu registrieren

Registrieren auf E - Mails für Fender BXR 25 wenn:


Sie erhalten eine E-Mail, um sich für eine oder beide Optionen anzumelden.


Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Wenn Sie innerhalb von 15 Minuten keine E-Mail mit dem Handbuch erhalten haben, kann es sein, dass Sie eine falsche E-Mail-Adresse eingegeben haben oder dass Ihr ISP eine maximale Größe eingestellt hat, um E-Mails zu erhalten, die kleiner als die Größe des Handbuchs sind.

Ihre Frage wurde zu diesem Forum hinzugefügt

Möchten Sie eine E-Mail erhalten, wenn neue Antworten und Fragen veröffentlicht werden? Geben Sie bitte Ihre Email-Adresse ein.



Info