Bedienungsanleitung Fender Mustang I (Seite 8 von 12) (Englisch)

550707

Zoom out

Zoom in

Vorherige Seite

1/12

Nächste Seite

Advanced Manual

Introduction

This manual is your step-by-step guide to all the advanced

features found on your Mustang™ I / II amplifier. For

information on using Fender® FUSE™, Ableton® Live or

Amplitube®, please see the separate manuals for each product

available at www.fender.com/support.

Navigation

There are just a few basics of Mustang navigation that you

should know before you explore any further...

Selecting Presets

The most powerful feature of your Mustang amplifier is its

ability to store every amplifier setting and effect selection as a

preset that you can instantly recall using the PRESET knob, or

remotely from your computer or footswitch.

Use the PRESET knob to select one of 24 presets. Presets are

stored in three banks, colored AMBER, GREEN and RED.

Turn the PRESET knob to scroll through each bank of presets

in the following order:

Each preset is based on one of the eight amplifier types

labeled next to each of the preset LEDs. That gives you a total

of three presets for each amplifier type.

♫

The

RED

and

GREEN

banks are for creating your

own presets. The

AMBER

bank of presets can only be

modified using Fender FUSE software available free at

www.fender.com/support

Each preset includes the settings of all the programmable

knobs on the Mustang, which includes every knob except the

MASTER volume and PRESET knobs.

Programmable Knobs

Because the setting of every knob on the Mustang amplifier

(except MASTER) is part of each preset, all programmable

knobs are normally inactive and knob positions will NOT

show their actual settings when a preset is first selected.

? ? ? ? ? ?

How do I activate a programmable knob? The moment you

turn any programmable knob it instantly becomes active

and it will remain active until you select a different preset, at

which time it becomes inactive again.

? ? ? ? ?

You may hear a big change in volume or tone when you

first turn a programmable knob if there happened to be a

large difference between the knob's starting position and

the stored preset setting. For example, if the VOLUME knob

is pointing to "8" but the stored preset VOLUME setting is

"2," the volume level will jump from "2" to "8" when you start

turning the VOLUME knob because the VOLUME knob is now

instantly active at "8."

♫

The only way to know what the preset setting of a knob

is before you turn it, is by using Fender FUSE software

and connecting the Mustang to your computer.

Effects

There are two effect selection knobs on the Mustang:

• MOD — selects Modulation type effects

• DLY / REV — selects Delay and Reverb type effects

♫

You can also select effects from a STOMPBOX category

using Fender FUSE software.

The MOD and DLY / REV knobs share the same three selection

indicator LEDs. The knob turned last has control of these LEDs:

Programmable knob positions are inactive unless turned

Rotate knobs to activate their positions

AMBER Bank

( Factory presets )

GREEN Bank

( User presets )

RED Bank

( User presets )

MU STA NG

™

I / II

f e n d e r . c o m

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Fender Mustang I Seite 8

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Andere Handbücher von Fender Mustang I

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info