HearMe CD250BT
Select stations
1. There are default radio stations whenever you turn on the unit with good radio signal reception. Press the
NUMBER buttons directly to select stations you want.
2. Press the CH+/- buttons on remote control or PRESET+/- buttons on the front panel to sequentially select
the previous or next station.
3. If you are aware of the station’s frequency, you can select the frequency to find stations. Press FREQ
button and then the NUMBER buttons on remote control to choose frequency. E.g. to listen to 103.50MHz,
press FREQ button, then press 1, 3, 5, 0 to enter 103.50MHz.
Save Stations
You can at most save 60 stations of the unit.
To save 99.70MHz to the 15th station, press CH+/- or Number buttons 1, 5, to enter the 15th station; press
the FREQ button and input 9, 9, 7, 0, then press the SAVE button to save.
TOUBLE SHOOTING
For your convenience, we have listed some methods to solve common problems you may
encounter when you use the system. If the problem occurs repeatedly, contact the nearest
maintenance center.
Problem Possible cause Solution
Power supply does not work Power plug is not fully
inserted into the power socket
Fully insert the power plug
into the power socket
Remote control does not work The batteries have been used
up
Replace them with new ones
The remote control is not
aimed at the remote control
sensor
Please aim the remote control
correctly; in line with the
remote sensor
Play is unavailable Disc incorrectly inserted Reinsert the disc with the
picture upward
Disc is not compatible with
this device
Only use discs that are
compatible with this device
No sound from speakers Audio wire is not connected
correctly
Connect the audio wire
correctly
12
