Bedienungsanleitung Ferm ATM1042 (Seite 4 von 88) (Deutsch, Englisch, Holländisch, Dänisch, Französisch, Italienisch, Portugiesisch, Spanisch, Polnisch, Norwegisch, Finnisch)

763846

Zoom out

Zoom in

Vorherige Seite

1/88

Nächste Seite

PNEUMATIC TACKER, STAPLES





By doing so you now have an excellent product,

delivered by one of Europeís leading suppliers.

All products delivered to you by Ferm are

manufactured according to the highest standards

of performance and safety. As part of our

philosophy we also provide an excellent customer

service, backed by our comprehensive Warranty.

We hope you will enjoy using this product for

many years to come.

The numbers in the text refer to the diagrams

on pages 2-3.

Read the operating instructions

carefully before using this device.

Familiarize yourself with its functions

and basic operation. Service the device

as per the instructions to ensure that it

always functions properly. The

operating instructions and the

accompanying documentation must be

kept in the vicinity of the device.

Contents

1. Technical specifications

2. Safety instructions

3. Air supply and connections

4. Loading the air stapler

5. Operating the air stapler

6. Maintaining the air stapler





Air pressure 4 -7 bar (60-100 psi)

Max. staple size 1.05x5.1x0.58 mm



1 Air stapler

1 Bottle machine oil

1 Strip fasteners 22 mm

1 DIN coupling

1 Instructions for Use

1 Warranty card

1 Safety instructions





Indicates potential for bodily harm,

fatality or risk of damaging the machine,

in the event that the instructions in this

operator’s guide are ignored.

Wear ear and eye protection

Lubricate the appliance.

Note carefully the following supplementary

points for safe operation of the air stapler,

as well as the other cautions in these

instructions for use.

• Use the air stapler solely for the purpose for

which it was intended.

• Never use the air stapler in a way that could

lead to a fastener being fired at the user or

bystanders.

• Do not use the air stapler as a hammer.

• The air stapler should only be carried by the

handgrip. Never carry the air stapler by the air

hose.

• Never make any unauthorised changes or

modifications to the design or the function of

the air stapler.

• At all times, be aware that incorrect use can

lead to serious injury to yourself and others.

• Never leave the air stapler unattended with a

connected air hose.

• Never use the air stapler whenever there is no

legible warning label affixed to the appliance.





• For proper operation of the machine with a full

continuous load under maximum operating

pressure, please make sure that the

temperature of the working environment in an

enclosed area is not more than +25°C.

• It is recommended to use the compressor with

a maximum operation of 70% in one hour

under full load, to allow for proper operation of

the product over time.

• Check that the tank is fully decompressed before

connections with the tank are unscrewed.

• It is prohibited to make holes in, or welds to, or

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Ferm ATM1042 Seite 4

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info