762278
3
Zoom out
Zoom in
Vorherige Seite
1/132
Nächste Seite
3
EN
BATTERY CHARGER
Thank you for buying this ferm product
By doing so you now have an excellent product,
delivered by one of Europe’s leading suppliers.
All products delivered to you by Ferm are
manufactured according to the highest standards
of performance and safety. As part of our
philosophy we also provide an excellent customer
service, backed by our comprehensive Warranty.
We hope you will enjoy using this product for
many years to come.
Carefully read the instructions before
you use the Battery charger!
Know you apparatus
Before you use theBattery charger, carefully
read the instructions, especially the safety rules.
Observe the instructions for maintenance to
ensure your apparatus always operates properly.
Before attempting to operate the apparatus,
familiarise yourself with the controls and make
sure you know how to stop it quickly in an
emergency. Save this user’s manual and the other
documents supplied with this apparatus for future
reference.
Intended use
This BCM1020 is a car charger with impulse
trickle charge (Chip Software) suitable for
charging and trickle charging the following 6 V or
12 V rechargeable lead batteries with electrolyte
solution, AMG batteries, lead-acid batteries, deep
cycle (marine batteries), or gel batteries:
For automotive and motorcycle batteries with
12 V / 6 V and 8-180 Ah capacity.
You can also regenerate drained batteries
(depending on battery type). The car charger
features a protective circuit against sparking and
overheating. Any improper or incorrect use will
void the warranty. The manufacturer is not liable
for damage caused by improper use. The device
is not intended for commercial use.
Note: The car charger is not suitable for charging
electric vehicles with built-in rechargeable battery.
Contents
1. Data
2. Safety
3. Installation
4. Maintenance
1. DATA
Technical specifications
Input voltage 230 V ~ 50 Hz
Rated output voltage 6V/12V
Charging current 2 A, 6 A, 12 A
Battery type with 12V/6V and 8-180 Ah capacity
This apparatus has a overload protection by
means of a thermal fuse which will switch on as
soon as the electricity is switched off.
Parts description
1. Digital display button
2. Battery type button
3. Charger start button
4. Fuse with cover
5. “+” Terminal connection cable (red)
6. “-“ Terminal clamp (black)
7. “+” Terminal clamp (red)
8. “-“ Terminal connection cable (black)
9. Mains cable
10. Digital display
Packaging contents
The following is supplied with your
Battery charger:
1 Battery charger/Jump starter
1 Set battery clamps
1 Manual
1 Warranty card
2. SAFETY
Explanation of symbols
Read instructions carefully
In accordance with essential applicable
safety standards of European directives
Denotes risk of personal injury, loss of life or
damage to the tool in case of non-obser-
vance of the instructions in this manual.
3

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Forenregeln

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Art des Missbrauchs:

Zum Beispiel antisemitische Inhalte, rassistische Inhalte oder Material, das zu einer Gewalttat führen könnte.

Beispielsweise eine Kreditkartennummer, persönliche Identifikationsnummer oder unveröffentlichte Privatadresse. Beachten Sie, dass E-Mail-Adressen und der vollständige Name nicht als private Informationen angesehen werden.

Forenregeln

Um zu sinnvolle Fragen zu kommen halten Sie sich bitte an folgende Spielregeln:

Neu registrieren

Registrieren auf E - Mails für Ferm BCM1020 wenn:


Sie erhalten eine E-Mail, um sich für eine oder beide Optionen anzumelden.


Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Wenn Sie innerhalb von 15 Minuten keine E-Mail mit dem Handbuch erhalten haben, kann es sein, dass Sie eine falsche E-Mail-Adresse eingegeben haben oder dass Ihr ISP eine maximale Größe eingestellt hat, um E-Mails zu erhalten, die kleiner als die Größe des Handbuchs sind.

Ihre Frage wurde zu diesem Forum hinzugefügt

Möchten Sie eine E-Mail erhalten, wenn neue Antworten und Fragen veröffentlicht werden? Geben Sie bitte Ihre Email-Adresse ein.



Info